l sb 2600 used for sale

Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our  ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our  ...

Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...

Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...

Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...

Compact vertical packaging system for small 3-side sealed pouches. The system is designed for 3 different dosing units and thus allows the packaging of granulates, powders and liquids. When changing the product type, time is needed for changeover, which requires technical experience. The configurations of the dosing units are selected on the basis of customized product requirements, which results in the respective specifications. OMRON PLC and 7-touchscreen, OMRON PID temperature controller, SCHNEIDER or OMRON electronic parts, AIRTAC pneumatic components | self-diagnose functions, motorized tension control, fast and smooth film transportation. - Specifications: max. speed of the machine in neutral: 50 cycles/minute | bag size: L(30-180)xW(10-80)mm | bag type: 3-side-seal-bags | vertical seal width: 8mm, horizontal seal width: 8mm, cutting way: serrate cutting | film width: max. 180mm |  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(45-55)xW(15-60)xH(5-30)mm | number of rotary knives: 6 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(48-60)xW(15-60)xH(5-30)mm | number of rotary knives: 5 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(55-85)xW(15-60)xH(5-30)mm | number of rotary knives: 4 p ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(80-170)xW(15-60)xH(5-30)mm | number of rotary knives: 3  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(90-220)xW(15-60)xH(5-30)mm | number of rotary knives: 2  ...

Flowwraping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(50-65)xW(15-60)xH(5-30)mm | number of rotary knives: 5 pcs ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(60-100)xW(15-60)xH(5-30)mm | number of rotary knives: 4  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(70-150)xW(15-60)xH(5-30)mm | number of rotary knives: 3  ...

Flow wrapping machine for high speed packaging of smaller products in flow pack bags. The flow wrapping machine is suitable for packaging of one or more, evenly or unregular shaped, dry, medium/larger products. The flowwrapper is equipped with a special infeed system of 6 guiding conveyors (driven by servo motors) to sort the products in series and feed them to the infeed table. The products do not have to be loaded individually by hand, which results in a considerable production advantage and contributes significantly to the efficiency of the flowwrapper. AMTECs flow wrap packaging machine is perfectly configured to the bag length in terms of the knives and their diameters with an optimization of the speed in the result. - Specifications: suitable product dimensions L(depending on bag length)xW(15-60)xH(5-30)mm | bag dimensions: L(70-200)xW(15-60)xH(5-30)mm | number of rotary knives: 2  ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 130 x 50 mm Truss Type: PNB0443|1.5 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,417 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.

Wraps A700S Shrink sleeve wrapper A700S shrink wrapper, sleeve wrapper machine, sealing bar 750mm width, max product 600mm x 400mm, ideal for trays, bottles, cans, food, drinks, toiletries and more, mobile, 3Ph

Production lines: 1. Polyester fiber production line (Chinese brand) Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: approx. 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: Some of the trusses have 5-6 drill holes on the sides. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery loc ...

sheet width: 6040 mm plate thickness: 4 mm total power requirement: 12 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m - Specification - backstop - Roller tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: Control: Fanuc 0i-MF with 10.4" LCD screen Manual Guide FANUC electronic handwheel FANUC digital axis and spindle drives Renishaw set infrared tool probe + workpiece probe BBT40-OMP40-2+OTS Cast iron construction of the machine Linear guidance of the X,Y,Z axis Spindle taper BBT40 BIG+ Max spindle speed 12000 rpm Spindle cooling POINT External cooling nozzles in the ring on the spindle Preparation for installation of wind cooling Central cooling 20bar + filtration 25µ, installed directly in the tub of the machine Upper covering for central cooling Magazine BBT 40 with a hand for 30 tools (tools and accessories included in the machine) Manual rinsing of the work area and the air gun Cooling distribution after the machine Central lubrication of guiding surfaces with oil Screw chip conveyor in the w ...

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

roll diameter: 250 mm roll length: 500 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New saf ...

Automatic evisceration line of 3000 birds/hour 8'' line. - Vent cutter machine 12 / 8" - Opening machine 12/8" - Eviscerator 12/8" - Cropper machine - Neck cutter and puller machine - Final inspection machine - Bird unloader machine - Feet cutter and Transfer System , including spare part

Used self-cleaning disc centrifuge made by Alfa Laval, type: MRPX 410 TGD 74. New 1988. Capacity: 7.500 liters/h. Technical data: - Function: milk separator, - Milk skimming capacity: 7.500 l/h, - Whey skimming capacity: 10.000 l/h, - Worm wheel shaft: 1420 - 1500, - Total installed power: 18.5 kW (1460 rpm), - RPM counter: 118-125, - Includes tools (wrenches), control, base, - Voltage: 380V / 50 Hz / 3 phases, - Stainless steel.

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

100 litre process tank Manufacturer : Hermann Waldner Content: 100 litres Technical specifications : cylindrical standing stainless steel tank with double jacket, insulation and agitator Material container 1.4435 Operating temperature 80 °C Material double jacket 1.4404 Pressure-resistant 2.5 bar Operating temperature 90 °C Capacity 22 litres Equipment: Propeller agitator Spout at the bottom center Agitator from above Documents: Nameplate

50 litre stainless steel container Manufacturer : Hermann Waldner Content: 50 litres Technical specifications : cylindrical standing single-walled stainless steel tank Material 1.4301 Operating temperature 40 °C Propeller agitator kW 0.37, 1,405 rpm the interior of the container is plastic-coated Spout at the bottom center Documents: Nameplate

Process vessel upright Capacity 545 litres Manufacturer Concept Product space: Pressure-resistant/vacuum-resistant +3/-1 Operating temperature 143 °C Polished interior Double jacket for heating and cooling: Pressure-resistant + 2 bar Operating temperature 143 °C Mobile Agitator flange available, no agitator Pharmaceutical version

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 25,150 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 81 pcs. Total number of pallet spaces: 81 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 3720 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,000 mm high 1,100 mm deep 36x Pallet rack cross ...

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Po ...

CNC Turning lathe LEADWELL T-6

Year of construction 2020 manual bookbinding machine Table model for manual operation Delivery date: short-term Price on request. We supply and install worldwide.

Key data: 110 V, 400

MAN E0836 LE302 Biogas Containerised Generating set. Scope of supply: Container, engine, alternator (Leroy Somer), control panel (ComAp), radiator, heat exchanger, exhaust gas heat exchanger, gas line, carbon filter. Engine is from 2019 in a container 2009. It has been carefully maintained and stopped running in October 2023. Service History December 2021: New pistons and cylinder heads June 2023: New turbo Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Ferroplan LP14FELT Pallet dispenser 2018, pallet dispenser, capacity 15 pallets, pallet size 1200mm x 1000mm, 500Kgs, 1Ph

Manufacturer: Lisec Technical Specifications ( Model: ATH -60/30 D) - Year of Manufacture: 1995 - Operating Voltage: 380 V, 3-phase, 50 Hz - Power Consumption: 5.9 kW - Machine Weight: 6,000 kg - Compressed Air Pressure: 6 bar - Maximum Load Capacity: 500 kg Machine Length: 6,600 mm Total Installation Length: - With 4 glass racks: 25,500 mm - With 3 glass racks: 19,300 mm - With 2 glass racks: 13,100 mm - With 1 glass rack: 6,900 mm Depth: 3,200 mm Height: 3,600 mm Load Capacity: 600 kg Transport Speed: 40 m/min Glass Size (Max): 3,250 × 6,000 mm Glass Size (Min): 1,600 × 2,800 mm Glass Thickness: 3–12 mm Electrical Connection: 220/380 V, 50 Hz Installed Power: 6 kW Compressed Air Connection: NW 9, 6 bar Technical Specifications ( Model: ESL-60/30RS) - Year of Manufacture: 1998 - Operating Voltage: 400 V, 3-phase, PE, 50 Hz - Power Connection: 13.5 kW - Machine Weigh ...

For sale on behalf of a customer: Lithoz CeraFab 8500 with complete equipment for post-processing and a variety of spare parts:, - Cleaning Station Ultra 2019; S/N: C-019-109-803 1pcs., - Airbrush NEO for Iwata BCN Siphon Feed Dual Action 1 pcs., - Pressable glass Pressable glass during UHC/VAT assembly 2 pcs., - UCH top with 6 screws 2 pcs., - UHC bottom 2 pcs., - Cera VAT F 1 pcs., - Used Cera VAT F and S Better ones may still be used 14 pcs., - LithaFoil CF8500 Adhesion foil 120x70mm 09.14.000064 71 pcs., - Printing platform 1 pcs., - Nabertherm Furnace TR60 2019; S/N: 371133 1pcs., - Nabertherm Furnace LHCT 08/16 2019; S/N: 374533 1pcs., - Nabertherm Furnace LHCT 04/17 2019; S/N: 367248 1pcs., - Fridge Arctico. For slurry storage 1 piece., - Small Z tube Tube for slurry cartidge 5 pcs., - Big Z tube Tube for slurry cartidge 13 pcs., - Printer key 1 pcs., - Cleaning station key 1 piec ...

Leroy Somer LSA 461 M3 - Used - 150 kVa - Generator End

various wire spools for calendars/exercise books for production. Different Wire-O coils 2:1 (different colors, different plastic rollers for spiralization). Calendar brackets, shafts

Manufacturer: P.E. Labellers Model: MASTER M.S. Type: 12T-770/4S-4E Year of Manufacture: 2007 Electrical Specifications: - Voltage: 400 V - Phases: 3 - Current: 11 A - Power: 6 kW - Frequency: 50 Hz Pneumatic Specifications: - Air Consumption: 30 L/min - Air Pressure: 5 bar Weight: 2200 kg CE Certified Y271010885 can manage a bottle height range from 120 to 400 mm - The range of bottle Ø goes from 30 to 120. - For the label length, this machine can apply labels that cover max 180° of the bottle. - The adhesive stations have a size of 200 H. - The machine is predisposed for the mechanical centering via bottom notch. - Max velocity of the machine is 8000 B/H. Find more here - / Contact us at -

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: BX 100|50|15 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery can be queried from us

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 102 x 50 mm Truss type: SLO 102|2 Agraffe: 5 HK Clear width: 1,450 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 89 x 50 mm Truss Type: SLO 089 | 2 Agraffe: 5 HK Clear width: 1,445 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.