129,523 used machines on RESALE, but how to find them? Machine Search
Schütz, Schütze, Leistungsschütz -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 19 available Price: per piece
Schütz, Schütze, Leistungsschütz -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 20x shooters available Price: per piece -Dimensions: 85/110/H110 mm -Weight: 1 kg
Wartsila L32 Connecting rods 8 Pcs available from stock From our Istanbul stock Reports available Tested for cracks and ovality In good condition
Listing ID: 22693 Brand Engine: Doosan Model: L126 TIM Power: 400 PS (294 kW) RPM: 2100 General condition: Very low hours only test hours Features: Flywheel housing: SAE-1 Flywheel: 14 inch Starter: 1 x 24V Governor: Mechanical Exhaust system: Water cooled Turbo: Water cooled Cooling system: H-E cooled Weight: 1060 kg Dimensions (cm) 150x90x130
Contactor, semiconductor contactor, contactor -Max. 30 kW 400 V -Quantity: 3 pieces available Price: per piece -Weight: 1.5 kg
Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg
Contactor, semiconductor contactor, contactor -Max. 11 kW 400 V -24 V DC -Price: per piece -Quantity: 4 pieces available -Weight: 1 kg
Contactor, semiconductor contactor, contactor -Condition: unused, original packaging -Power: max. 540 A 600 V AC -Quantity: 1 piece available -Dimensions: 260/250/H230 mm -Weight: 13 kg
2615157 Layher Cushion Bar 1,57 brewed approx. 2000 pieces available Also available Layher Cushion Bars 1.09 and 1.40 Complete stock list original Layher on request
KHS/ALFILL ULTRACLEAN RINSER-FILLER-CAPPER Model: linefill CP48-16-8, Year of make: 2003 Capacity: 6000 bottles per hour Bottle volumes: 1000 ml, 750 ml, 500 ml, 330 ml, 250 ml, 200 ml Format change time: 15 minute USED SLEEVER CLEVER USED SHRINK TUNNEL USED ACCUMULATION CONNECTION AND EXIT CONVEYOR SYSTEM
Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...
Driven heavy roller conveyor for a gang saw, band saw Machine dimensions: total length 8300 mm, width 1800 mm, roller width 1600 mm, height roller of floor 580 mm, Roller Number 11 pieces Gear motor Power 2 kW/1400 rpm Total weight 2000 kg. As good as new
Loading aid AHLBORN, type: Liftmatic for double width - Up and down movement automatically - 6 seconds from bottom to top - Manual loading - Condition: Very good - Speed: 15 cm/sec
Brand: KOMAR/ BK TECHNOLOGIES Total dimension L: 11000 Electric connection: 380 Total dimension H: 1900 Total dimension W: 1500 complete baking line; Productivity up at 400kg/hour for 100g formats; 50g sandwiches to 300g; Manual ingots loading, automatic panning; composed of ribbon input; 3 height-adjustable rolling mills; floury; 1 cutting unit with 1-5 ways/carpet flour recovery; webbing tape dough advancement; cutting group transversal; counter-rotating moulder belt; tear-off trolley tape and collection tape and in chin baking tray; exit plate
with 5 Bitzer compressors Make: BITZER Type: 6G-30.2Y-40P Displacement: 153.1 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
with 3 Bitzer compressors Make: BITZER Type: 6H-25.2Y Displacement: 133.3 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
Composite system with 1 Bitzer compressor Make: BITZER Type: 4G-20.2-40P Displacement: 102.1 m³/h with 1 Bitzer compressor Make: BITZER Type: 4GE-23Y-40P Displacement: 102 m³/h and with 1 Green Point compressor Make: Green Point Type: 4G-20.2Y-40P Displacement: 101 m³/h Refrigerant: R404A Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
new
KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3
Plastic sheets, plastic laminate -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg
Cutter Manufacturer: Alpina Made of stainless steel Volume: 200 liters
geared motor, electric motor -Speed: 6.8 rpm -Power: 0.18 kW -Design: B14 angle -Shaft diameter: Ø 25 mm -Protection class: IP 55 -Weight: 17 kg
Aseptic Tetra Pak Filling Line – A3/Flex 150V (250 ml Prisma) High-quality aseptic carton filling line designed for efficient packaging of liquid food products in 250 ml Prisma cartons. The line is equipped with reliable Tetra Pak equipment and features low operating hours, making it an excellent solution for beverage and dairy producers seeking dependable aseptic packaging capacity. Line Configuration - The filling line consists of the following equipment: - Tetra Pak Filling Machine – A3/Flex 150V - Tetra Pak Accumulator – ACHX 10/35N - Tetra Pak Straw Applicator – TSA21 - Tetra Pak Film Wrapper – TFW67 - Tetra Pak Filling Machine - Core aseptic filling unit for 250 ml Prisma cartons. Technical Specifications - Manufacturer: Tetra Pak - Model: A3/Flex 150V - Year of Manufacture: 2008 - Package Volume: 250 ml - Package Format: Prisma - Capacity: 9,000 pac ...
centrifugal pump, water pump -Flow rate: 15 m³/h -Pumping height: 11 m -Motor power: 1.1 kW -Speed: 1420 rpm -Number: 2 pumps available Price: per piece -Dimensions: 380/270/H480 mm -Weight: 44 kg/piece
Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73
Tool changer chain, chain magazine, tool changing system, tool magazine -for: max. 60 recordings -Hole: Ø 17 mm -Weight: 44 kg
geared motor, electric motor -Speed: 150 rpm -Power: 0.1 kW -Design: B3 -Shaft diameter: Ø 10 mm -Protection class: IP 65 -Weight: 4 kg
60 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 4.5 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 3.950,-- net from stock Offer consists of: + 17 frames pre-assembled, depth 110 cm, height 4.5 m + 64 beams, length 3.6 m, 4000 kg load/compartment +128 pcs Suspension Devices + 68 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pal ...
Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 0.75 kW -Speed range: 39 to 213 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg
Leonhardt AG2 Twin head dosing machine Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg
Three-phase motor, electric motor -Power: 0.18 kW -Speed: 2790 rpm -Shaft: Ø 15 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg
electric motor, three-phase motor -Power: 0.37 kW -Speed: 1390 rpm -Shaft diameter: 13 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg
electric motor, three-phase motor -Power: 0.55 kW -Speed: 1400 rpm -Shaft diameter: 19 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 12 kg
Three-phase motor, electric motor -Power: 0.1 kW -Speed: 3000 rpm -Shaft: Ø 8 mm -Design: B3 -Protection class: IP 44 -Dimensions: 230/160/H110 mm -Weight: 3.3 kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
318 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 9 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 36.950,-- net from stock Offer consists of: + 87 pcs frame pre-assembled, depth 110 cm, height 9 m + 688 beams, length 3.6 m, 4000 kg load/compartment +1376 pcs Hook-in safety devices + 348 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metre ...
Key data: 220 KW, 274 kVA, 400 V
gebr, emergency power generator in the container
Automatic high speed cartoner which is currently packing boxes of cereal/protein bars.
Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 2x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 33 mm -Dimensions: 100/80/H130 mm -Weight: 2 kg
Eyelet machine Hang 103 LOK, machine number 30621, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800
gear motor, electric motor -Speed: 750 rpm -Power: 0.8 kW -Design: B3 -Shaft diameter: Ø 25 mm -external fan -Protection class: IP 44 -Weight: 26 kg -Overall dimensions: 650 x 230 x H190 mm
maximum number of results exceeded
please refine your search
