l sb 2600 used for sale

Chain excavator Liebherr R941B with sheet wall ram Technically fine Built in 1977

Can be connected on the Alfa Laval 205 skid Check our other Resale entries

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

New engine for exchange info@miw-zeven.de

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

technical data: Make: Linck Track gauge: 850 mm Support height: approx. 470 mm

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

technical data: Make: Loher Type: LA 80b-4 Types No:: 8235539 Connection: Star 220/380 / 3.4/1.95 A kW: 0.75 kW Rpm: 1410 rpm

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. approximately 20,000 or more shipments per day. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Ventilation system FABRIKat TROGES Vienna, different size, 4,000m3/h, 5,000m3/h, 7,500m3/h, 12,500m3/h, 26,000m3/h. All ventilation system sid equipped with 4 connections for: supply air, exhaust air, fresh air, exhaust air and heat recovery, cross heat exchanger, connections for hot water and cold water. More info. 0043-6641838175 or info@frigocom.at

We offer an Exchange overhault engine Caterpillar type: C13-LGK... Engine is general-overhault with guarantee. Also for chrusher contact: MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven, Germany Phone:0049 (0 4281-950583 fax :0049 (0)4281-950585 info@miw-zeven.de email:info@miw-zeven.de abc. miw-Zeve

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cross-moving trolleys for the lateral transport of passenger cars, e.g. from the paint booth to the adjacent drying cabin. Make : Wolf and Lutro Track width: 580 mm or 600 mm Dimensions: 630 x 580 x 120 mm (WxLxH) Material: Aluminum or steel Weight: approx. 8.5 kg or approx. 12 kg We also have older cross-slide trucks from LUTRO, Hildebrandt, Durst etc. made of sheet steel with larger gauges in stock, e.g. 810 mm, 880 mm and 1000 mm. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask. Please ask.

Technical data: total length: 5.3 m boxing number: 5 pieces impulse: 1.5 kW conveyor height: 2,350 m

Ladies and gentlemen, we are able to offer larger quantities of chopping chips in the long term. We would be pleased to have an inquiry. Yours sincerely Trade & Translations

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

Cylinder head new with valves mounted . We have a lot of recon engines at stock now.Please contact us... MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany info@miw-zeven

Different fan types and models

Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

BHKW in container with Cummins diesel engine Lorey Somer generator 250KVA 1500U / min 50 hertz Storm Steuerung, arrangement is equipped with emergency cooler zusaetzl. regularly waited to zeit 21000 company hours. arrangement is operational and available immediately. for other questions I stand to them to verfuegung under 01727265324

Robot Kuka KR180L130 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 130 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

Robot Kuka KR180L150 series in 2000 construction year 2002 reach 2900 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Valvematrix with 6 DN65 UNIQUE mixproof valves, with balanced bottom channel. Yom. 2002, excellent condition.

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

Aseptic copntrolvalve ALFA-LAVAL SPC-2 KV16 yom. 2006, unused.

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

Table load 35 to . tischdurchmesser 3,000 mms

Table load 30 to . table diameter 3,000 mms

We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€

Composite plant Fabrikat Linde, 45kW at minus 10C evaporation, with control box, with 3 pcs. compressor Bitzer, type 4DC-5.2Y, Y.O.M.: 2004, with refrigerant R404A

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.

General of overhault engine immediately available from stock Contact= MIW GmbH Nord-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0)4281-950583 Fax : 0049(0)4281-950585 info@miw-zeven.de abc.miw-zeven.de

Rock Wool factory 16.000 t/y - Stone wool - Laine de roche - nearly new - for all products.2,5 tons Rock Wool per hour - Coppola Kiln, fired by coal - Rest on request. licence of Swedish System

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

Type: LKM 3027 Just: 2213857 ZwischengetriebeNr.: 318978 Disco built gearbox Lenze Type: 11711.06.16 No.: 6/7000/2365 N1 = 1500 min-1 N2 = 65-375 min-1 Engine: Loher power: 2,5 kW on mobile carts Condition good Dimensions: LWH = 1300 x 350 x 750 mm Weight: approx. 100 kg

CALIBRATING SANDING machine model LC 220 second hand machine volt.380/50 n.1 calibrating roller motor power Hp 6 carpet feed ( 2 speed ) motor power Hp. 0,5 / 0,75 max. working width mm. 220 max. working heigth mm. 150 belt dimension mm. 2020 x 240

1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min

1 high quality, factory-tested, well preserved double girder crane especially suitable for the Coilumschlag Load approx. 80,000/32,000 kg Wingspan approx. 25,600 mm Hook way approx. 8,500/13,500 mm Make SIEMAG/SIEMENS Overhaul and rebuild/workshop test 2009/2016 Trolley in robust wind plant design, between the crane bridge catwalk one-sided lowered to optimize the installation height, cabin control (expandable easily on radio), operating speeds: Main hoist 80 t to approx. 4.25 m / min auxiliary hoist 32 t up to approx. 10.8 m / min Katz LG 32/80 t Max approx. 40.0/20,0 m / min Crane chassis 32/80 t Max 80.0/40.0 m / min

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min