l sb 2600 used for sale

Fiber Laser Welding Machine with 2000 Watt Laser Power - Top device at a top price from our exhibition - approx. 20 operating hours - 2kW laser source from MaxPhotonik - German menu navigation - Universal device for welding/cutting/cleaning - Incl. 4-roll welding wire feeder - Integrated water cooling -at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg ---------------------------------------------------------------------- -------------------------------------------------- #Lasermarkieren #Lasergravur #Laserschneiden #Wasserstrahlschneiden #Laserbeschriftung #Gravur #Geschenk #Glasgravur #Werbeartikel #Holzgravur #Geschenkidee #Typenschilder #Alugravur #Ledergravur #Glasschneiden #Pulverbeschichten #Pulverlack #Entlacken #Laserentlackung #Laserreinigung #Laserstrahlreinigung #Lasern #Gewindeschneiden #Abkanten #Kanten ...

Pulse laser cleaning device with 200 watt laser power much more effective in cleaning/rust removal applications than continuous lasers, such as those used in welding lasers. Take a look and test it now Top device at a top price from our showroom for paint stripping, rust removal, VA weld seam cleaning, etc. 200 Watt Pulse Laser / Air-Cooled German menu navigation at call Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 100kg

Key data: 8000 mm, 2500 mm, 6000 W

8000 x 2500mm 6kw

4 pieces diode laser system, Limo Diocut 1300 – used - : Price per piece from location: 1.950.-€ (net)! Manufacturer: LIMO (Lisotchenko micro-optics) Type: Diocut 1300 Year of Make: 2013 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Frankenberg camp / Saxony

8 boxes (16 rolls, 10,000 labels each) labels for label printers, Logopak, 170x75, – used - : Price for complete acceptance: 150.-€ (net). Manufacturer: Logopak Type: 170x75 Label rolls: 2 per box Labels on Roll: 10,000 pieces Per box 20,000 pieces Labels Condition: very good Available: immediately Location: Frankenberg camp / Saxony

Product number: 2980 Type: 300S Serial number: 4066 Year of construction: 2014 Model: B Load capacity: max 350 kg Tilting height: 2800 mm Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1700 x 1800 x 3600 mm Weight: 500 kg Including safety light grid and proximity sensor

Product number: 2981 Type: 300S Serial number: 4067 Year of construction: 2014 Model: B Load capacity: max 350 kg Tilting height: 2800 mm Power: 3 x 400V, 50Hz, 1.5kW Dimensions: 1700 x 1800 x 3600 mm Weight: 500 kg Including safety light grid and proximity sensor

Max. blank / workpiece over bed1200 Max. blank / workpiece in the gap2400 Ø Centre height over bed600 mm Distance between centers2350 mm Length of the gap400 mm Maximum sheet thickness6 mm Stroke X-Axis1200 mm Stroke Y-Axis300 mm Speedrange6 - 675 Rpm Power40 kW Stroke pinole quill750 mm

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 The line includes glass grinding line, washing line, drying and gluing line for making laminated glass and insulated glass panes Total dimensions of the line approx. 24 x 3.5 x 3.1 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG insulated glass and laminated glass pane production line used Manufacturer: LISEC Type: SIRI Year: 1996 max pane height approx. 230 cm Total dimensions of the line approx. 12 x 1.2 x 4.4 m; Plant is dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

VSG Cutting table with roller conveyor used Manufacturer: LISEC/ BYSTRONIC Year: 1996 Cutting width max. approx. 306 cm Dimensions cutting table approx. 7 m, 3.8 x 1.1 m; Dimensions roller conveyor approx. 6 x 3 x 1.1 m; The roller conveyor can be tilted hydraulically. The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Laser Type: CO2 - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 56.734 h - Beam ON Working hours: 28.407 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

; Gross weight [kg]: 2600; Inspection Date: 2025-10-22; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Totally overhauled machine between 2017-2018 - Laser Type: CO2 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 900 kg - Positioning speed X/Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 50.000 h - Beam ON Working hours: 24.456 h - Weight: 12.000 kg - Dimensions (long x wide x high): 11.250 x 4.600 x 2.400 mm - Electric consumption entire unit: 33 - 72 kW

Key data: 1000 mm, 800 mm, 300 kg

High-precision laser cutting machine with 1500 watt laser power Trade fair demonstration machine, with minimum operating hours (approx. 50 hours) We would be happy to demonstrate the machine to you at our premises. Travel distance approx. 1000 x 800 mm - For high-precision cutting of metal - Optional, cnc-controlled decoiling device available - Everything is fully installed and adjusted - Cutting software in German - incl. nesting module - Switch on and get started - Laser source from Max Photonic with 1500 watts of power - Cutting head from Raytools - Cutting stainless steel up to 6mm - Cutting steel up to 15mm - Cutting of aluminium up to 6mm - cutting brass up to 3mm - Heavy industrial quality - Complete system / ready for immediate use - LED work area lighting - 200mm pipe connection for smoke extraction - Incl. extraction f ...

Buchdruck Schrank - Letters Cabinet Bayer For Leter Press Heidelberg OHT - Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

For sale is a used low-pressure cleaner, from the manufacturer System Cleaners. The LEDA 5 comes from a prototype plant and is only 50 operating hours. Year of Make: 2011 Type: LEDA 5 FF Max. temperature: 70°C l/min. max.: 120 Voltage: 3 x 400 V Frequency: 50 Hz Dimensions (L x W x H): 1700 x 800 x 540 mm Weight: 150kg Grundfos Vertical Pump: CRNE5-14 J-CA-GI-E-HQQE incl. installation and maintenance instructions Price excludes VAT, freely loaded from the Hesse-Germany location. Shipping to Arrangement and assumption of costs as well as delivery possible throughout Germany. Changes / errors in the technical data as well as prior sale reserved.

Used Pretzel String Roller / Cone Winding Machine UNIVERSUM, Type: LWT3/80-40J-EB2/20 -Overhauled- - for wrapping croissants - Dough strand roller for pretzels - new belts, new parts, overhauled - Very good condition - Ready for immediate use Visits and test runs are possible by arrangement.

Condition Used Stock Number 3350P Tetra Pak Laval Hoyer extrusion line Type ARB.BORD IND Tetra Pak Laval Hoyer extrusion line Serial number 348-5214 Tetra Pak Laval Hoyer extrusion line Year of construction 1998 Tetra Pak Laval Hoyer extrusion line Capacity 27000 sandwiches/hr Tetra Laval Food Hoyer spiral freezer Type ST LINE 1100 Tetra Laval Food Hoyer spiral freezer Serial number 348-1023 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Laval Food Hoyer spiral freezer Refrigerant NH3, Ammonia Tetra Laval Food Hoyer spiral freezer Evaporator 2 pc. Retech GLS 50-18-280 Tetra Laval Food Hoyer spiral freezer Tetra Pak Laval Hoyer dip and transfer unit 12 lane Tetra Laval Food Hoyer spiral freezer Type HOYWRAP MW1200-6 Tetra Laval Food Hoyer spiral freezer Serial number Z415.3872 Tetra Laval Food Hoyer spiral freezer Year of construction 1998 Tetra Pak H ...

ADIGE BLM LT652 Model : LT652/B Year of Manufacture : 2002 Laser Generator: DC025 (2500 Watts) Loading Length : 6500 Drain Length : 4500 Hours of Electrical Panel : 60433 Tension Laser Ore : 62285 Chiller : recently replaced Disassembly options - available now.

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

Logopak 920 IIP labeller Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

Linear rail with folding cam Height-adjustable for mounting on hole punches

- For vertical shooting - Load capacity - 250 kg - Suction plate diameter 2 x 300 mm

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

MEMMERT WNE 45 + SV2945 - 45 liters Model: Water bath / WNE45 - Stirring system: SV2945 Temperature range: approx. 5 °C above ambient temperature up to +95° C Setting temperature range +10 to +95 °C Display resolution: 0.1 °C Capacity: approx. 45 liters Internal dimensions (WxDxH): 590 x 350 x 220 mm External dimensions (WxDxH): 818 x 516 x 401 mm Network: 230 V / 50 ... 60 Hz / 2800 W Weight: approx.: 26.0 kg Minimum fill level: 177 mm Maximum fill level 200 mm Digital timer from 1 min. to 999 hours for: ON (continuous operation) WAIT (delayed start) HOLD or HOLD depending on the target temperature with "holding time guarantee" With Memmert SV2945 stirring device Stirring device incl. support frame, with electronic frequency control 35 – 160 cyls min (linear amplitude) Year of manufacture: 2018 and 2019

Levelling Elements - Machine Stand EFFBE - LevelMount - EFFBE LM 6 - 60 Maximum static load 3,200 kg Diameter 185 mm Height 45 mm Thread M 20 x 1.5 Leveling height 20 mm Weight 3.4 kg - 1 piece(s) in stock - new - Unit price

Levelling Elements - Machine Stand EFFBE - LevelMount - EFFBE LM 5-55 Maximum static load 4,000 kg Diameter 160 mm Height 35 mm Thread M 16 x 1.5 Leveling height 20 mm Weight 2.2 kg - 95 units in stock - new - Unit price

Precision spirit level Längenmesstechnik Limbach 200 mm Accuracy: 0.02 mm/m in wooden box Dimension: 230 x 220 x 55 mm

Metal 3D Printing Concept Laser for sale, second hand. The operating hours amount to approximately 10,000, of which a maximum of 1,000 hours are laser hours in which the laser actually ran. Medium: Ytterbium Wave length: 900-1200 nm Power: 2.65 kVA Specifications: -Type: M2 Cusing -Year of manufacture: 2015 -Very few laser hours! -Machine incl. filter unit-ATEX II-Water V2, sieve length, nitrogen generator with buffer tank -Delivery: immediately Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for the safe processing of of aluminum and titanium alloys etc. Only aluminum (AISi10MG) was printed on the system. The system has also saved a backup folder for titanium parameters. These titanium parameters were originally supplied, so "theoretically" you can also print titanium Outer dimensions: 2542 x 1818 x1987 mm (W ...

Finger jointing line The plant is from 2011 and the machines have been delivered NEW by HOWIAL. The Cook Bolinder is a used, old but very robust machine. Some electrical devices have been replaced. Item Description 01 HOWIAL - Dump unstacking SH/4t for lifting the raw wood pile to the required working height working height and semiautomatic separation of the wood of the wood stack. Both battened and unbattened stacks can be separated. can be separated. With inclination possibility for tilting the stack of wood up to 45°. Tilting and lifting of the stack by electric motor drive. drive. stack dimensions max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest lumber length 2,5 m 02 HOWIAL - lamella separation VE 1 for layer separation between tilt destacking and and roller conveyor to the crosscut saw. With pneumatically controlled tongues, on which the material is ma ...

The EWAB TS190 is a cutting-edge automated production system designed to streamline manufacturing processes while incorporating advanced laser technology. This versatile machine is equipped with a dedicated laser cell, enhancing its capabilities for precision cutting, engraving, and material processing. The integration of robotics, automation, and laser technology makes the EWAB TS190 a reliable solution for a wide range of industrial applications. Find more here - / Contact us at -

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

Pallet Production Line / SAS bracket line Three people are needed to operate the line and two people to operate the saws for cutting the supports Saw cutting can be further automated. Find more here - / Contact us at -

turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories

turning length:800 mm total power requirement:380 V weight of the machine ca.:1400 kg dimensions of the machine ca.:2200 x 1200 x 1300 m centre height:160 mm chucking diameter:150 mm

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

Loader-unloader system Was still in use until about 2 years ago and fully functional until the end. Type ISU210S and ISL175S Find more here - / Contact us at -

2x 1991 Kettner, Palletizing lines Palletising line 1 & 2 manufacturer Kettner company Year of construction 1991 Overhauled 2009 STATUS Palletising line 1 2 Currently in operation, Mechanically regularly maintained and in operation CONTROL Currently in operation, but no more spare parts available on the market (therefore the entire system will be replaced) The system is ready for use again when the control unit is replaced Line 1 Empty pallet magazine Infeed conveyor Loader / palletiser Finished pallets’ conveyor line Line 2 Empty pallet magazine Infeed conveyor Loader / palletiser Conveyor line ‘finished pallets’ Find more here - / Contact us at -

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

DMG LaserTec 40 Sauer The 2008 DMG Lasertec 40 Sauer is a high-precision machine tool used primarily in the manufacturing industry for laser machining and additive manufacturing processes. It was produced by DMG MORI, a well-known German-Japanese manufacturer of CNC machine tools. Here´s a breakdown of what the machine is and what it does: Key Features: - Laser Machining: The Lasertec 40 Sauer is designed for laser-based processes, such as laser ablation, laser structuring, and laser welding. These processes are used to precisely remove material, create intricate designs, or join materials together. - Additive Manufacturing: This machine is also equipped for additive manufacturing (often referred to as 3D printing) using laser metal deposition (LMD) technology. It allows for the creation of complex metal parts by adding material layer by layer. - Multi-Functionality: The Lasertec 40  ...

This Press laminating machine is the perfect solution for automotive, aerospace, and various manufacturing applications. Built before 2015, it offers exceptional precision and durability .Designed to handle large and complex laminating projects efficiently, this machine is ideal for businesses seeking to improve quality and productivity. We have three machines from different years ( two dated before 2015 and one from 2018). Machine details : Dimensions (L x W x H): 3600 mm x 2850 mm x 4530 mm Table Size: 1600 mm x 900 mm Weight: - Overall: 4300 kg - Lower part: 4900 kg - Upper part: 4300 kg Find more here - / Contact us at -

DOOSAN LYNX2100LMB (installed new in 2021). Model: LYNX 2100LMB Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 27.07 kVA Interruption Capacity: 5 kA Full Load Current: 41.14 A Short-Circuit Capacity: 10 kA Control System Output: L22SYH404A05 Weight: 3000 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list of toolholders ; A. Turning Holder - OD Tool Holder (Right & Left) - Quantity: 2 pieces - Face Tool Holder (Right & Left) - Quantity: 1 piece - Double OD Tool Holder (Right) - SUB- Quantity: 1 piece - Cut-off Tool Holder (Right Hand) - Quantity: 1 piece B. Boring Holder - ID Tool Holder - Quantity: 2 pieces - Triple ID Tool Holder - Quantity: 1 piece - U-Drill Cap - Quantity: 1 each C. Milling Tool Unit - Straight (Short) - Quantity: 2 pieces - Angular - Quantity: 2 pieces D. Tool Sleeves - Boring Sleeves (Main) - Quantity: 1 ki ...

DOOSAN LYNX2100LSYA (installed new in 2021) Model: LYNX 2100LSYA Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 37.43 kVA Interruption Capacity: 5 kA Full Load Current: 56.87 A Short-Circuit Capacity: 10 kA Control System Output: L220SYH840A05 Weight: 4150 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list toolholders ; Turret Type (Mechanism/Station): Servo/24ST Holder Mounting Type Tool Size (Turning/Boring): BMT-45P 20/32 mm Tooling Parts Detail A. Turret Head/Tool Table - - Quantity: 1 ea B. Turning Holder - OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Face Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN/SUB - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool H ...

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Index Table for Automatic Composition: - Belt dimensions: 2000 × 4000 mm. - Features photocells and a stop bar for pr ...