130,760 used machines on RESALE, but how to find them? Machine Search
Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...
measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FERAG wire stitching machine Year: 2008 Binding block format V1 Gross: min 152 × 217 – max315 × 340 Net: min 148 × 210 – max 300 × 332 Insert for feeder station Min 110 × 95 – max 315 × 340 Gluing of sheets only – no blocks Net format: min 55 × 85 – max 280 × 200 min 85 × 55 Advertising sleeves and folded inserts with one fold must be tested. Number of insert feeders 8 Number of glued-sheet feeders 1 Maximum block thickness 5 mm Insert pre-fold 8 to 12 mm – back pre-fold only Insert without pre-fold Possible, but not across the entire format range Double production Cutting in the machine not allowed Trimming Head and foot trimming 3.5 – 50 mm Side trimming 3.5 – 50 mm Landscape format cannot be trimmed on the three-knife trimmer, which differs structurally from saddle stitchers and wire stitchers. Staples Number of standard stitching sta ...
table diameter: 1500 mm workpiece height: - mm number of wheels: 4 total power requirement: 4,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.
Manufacturer: Heidelberg Model: Linoprint CV Year of Manufacture: 2015 Type of Machine : Digital Colour Press Total Colour Impressions: 1,345,950 Total Black and White Impressions: 445,200 INCLUDED ACCESSORIES - 3x Large Capacity Paper Cassette (triple configuration) - Finisher SR 5050 - EFI Fiery Controller E-43A Find more here - / Contact us at -
This 4-axis DN SOLUTIONS LYNX 2100GA was manufactured in 2021. As new, showroom model. It features a maximum spindle speed of 6,000 RPM and a bar capacity of 45 mm. The machine is designed for high-performance compact turning, optimized for small precision parts. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100GA horizontal turning machine we have for sale. Contact us for further details.
CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -
A CNC tube welding system Weil Technology for longitudinal seam welding is available. Tube diameter range: 76mm-600mm, Tube length range: 250mm-1550mm, Material thickness range: 0.8mm-2mm, Welding process: Laser, Max. welding output: approx. 80pieces/h. Documentation available. An on-site inspection is possible.
9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm
(1976) 250t Berrenberg-Pressen Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This Berrenberg model is a powerful mechanical press engineered for high-tonnage applications, featuring an impressive 640 mm shut height to accommodate large and complex tooling setups. Technical Details Machine Type: Eccentric Press Manufacturer: Berrenberg Pressen Model: LEPr 250 355 Year of Manufacture: 1976 Nominal Capacity: 250t Stroke Rate: 45 strokes/min Ram Stroke (Adjustable): 40 – 180 mm Ram Adjustment: 80 mm Shut Height (Die Space): 640 mm Overrun Time (Stopping Time): 0.152 seconds Safety Distance: 284 mm Motor Power: 18.5 kW
ID3716 Liebherr LTM1025 year/Baujahr 1991 12,360 hours/hours, 110,300 km Mobile crane, with jib Mobile crane, with jib
General SKU017H052 MakeHermann Linden Maschinenfabrik TypeLPMD-2 No.1555 Year of construction1991 LocationBarneveld Material Pan materialStainless steel 1.4401 (316) Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume2 Ltr. Motor1.1 KW Specified Features - Planetary mixer Planetary mixer/dissolver (1x) Motor1,1 KW, 220/380 Volt With variable speed drivecheck Speed scrapervariable, Motor scraper 0,55 KW, 220/380 Volt With covercheck With pancheck Capacity2 Ltr Pan sizesdia. 160x110mm With jacketcheck MaterialStainless steel Information With switchcheck Floor space1,0x0,7 M Total height1,8 M Weight440 KGDiscountPlanetary mixersHermann LindenDiscountMixers > Planetary mixersBrand > Hermann Linden What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...
metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.
Grinding wheel dimensions (od x id x width): - ajuste vertical manual del a rodillo, Ø min/max to be rectified: 125 mm, Grinding wheel width: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Drive wheel dimensions (OD x ID x W): Ø280 x Ø165 x 254 mm, Working wheel motor power: 30 Cv, Total power: 34 Cv, Weight approx.: 5.500 Kg, Dimensions: 2600 mm long x 1200 mm wide x 1200 mm high
VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...
Folding Unit – Lang Apparatenbau (Switzerland) For sale is a high-quality folding unit manufactured by Lang Apparatenbau, Switzerland, a company well known for precision mechanical solutions used in the printing, packaging and paper converting industry. The unit is designed for precise and reliable folding operations and can be easily integrated into existing production lines. Technical details Manufacturer: Lang Apparatenbau (Switzerland) Number of fold plates: 4 First fold plate adjustment: up to 450 mm Table extension: up to 600 mm Robust mechanical construction ensures long service life and consistent folding quality. Additional equipment A major advantage of this offer is the large amount of spare parts and additional fold plates included in the package. This allows flexible setup and long-term operation. The machine is in very good technical condition. ...
This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.
Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...
This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details.
Overview This Krones Linapac A-T-1600 automatic bottle unpacker was manufactured in 1998 and was previously installed in a returnable glass beer bottling line. The machine is designed to automatically remove empty bottles from beverage crates and transfer them onto the bottle conveyor system for further processing. The unpacker was operated in a production line with a capacity of approximately 33,000 bottles per hour, making it suitable for high-capacity returnable glass operations. Machines of the LINAPAC series are widely used in the beverage industry due to their robust design and reliable crate handling. The machine is currently out of production but complete, electrical disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle unpacker Year of manufacture: 19 ...
Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.
Solver - KS360 - belt sander - Motor power: approx. 1.6 – 2.6 kW - Belt speed: approx. 7.5 – 34 m/s (depending on the pulley) - Drive: Electric motor with belt drive - Sanding belt length: 2,500 mm - Sanding belt width: 5 – 75 mm - Contact washers: Ø approx. 100 – 225 mm - Strap system: 3-roller system Dimensions: LxWxH 0.9x0.7x1.8 meters / Weight 350Kg
Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...
CONTROLS CNC controls SIEMENS TECHNICAL SPECIFICATION Max. diameter of tube: 120 mm Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 8000 mm space requirements -front/back-: 2600 mm total height: 2300 mm total weight approx.: 16500 kg machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) (Ø22x2, Ø28x2, Ø38x2.6, Ø42.4x2.6, Ø48.3x2.6, Ø60.3x2.9, Ø76.1x3.2, Ø88.9x3.2, Ø114.3x3.6 ...
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
From a current recycling we offer you a well-maintained motorhome from Rollerteam on chassis Fiat. Year of Make: 2020 Registration date: 11.2020 Condition: good KM.: 40100 Asking price: 36.000 € net VHB Equipment / accessories / other information: Automatic, 160 hp engine, Comfort package, Panaroma Sky Roof, full car. Satellite antenna, trailer hitch, and much more. Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 32257 Bünde The sale is without warranty
Machine Name: Decanter Centrifuge Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year of Make: 1993 Max. Drum Speed: 3250 1/rpm Material: Stainless Steel Drive motor: 18.5 / 21 kW Inner diameter drum: 353 / 198 Inner drum length: 1200 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: Length 3000 x Width 1000 x Height 1150 mm Curb weight: 2500 kg Tech. Documentation: Yes Remark: Eddy current brake Accessories: A control cabinet Condition: Used Price: On request
3-piece consisting of connector FFS-00.250.CTCE31, apparatus box ERN.00.250.CTL, Anti-kink grommet Desmopan white type GMD.00.028.DB, Price for dismantled parts, Parts can also be purchased individually= Plug, Apparatus Socket, Kinking Protection Grommet, Request Single Price
PVC sheath grey, with 6.3 mm jack plug on both sides (or without) Connector 2-pin, KU black, 2x1 mm², OD diameter 6.1 mm 1 cable 29.5 m Price 1 piece 29.5 m
Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...
Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...
LASCO FP 222 S hydraulic press was built in Germany by Lasco Umformtechnik GmbH. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO FP 222 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex components used in the broadly defined automotive or machinery industry. Its main application is hot and cold forging. The use of a die cushio in the lower work table and the large slider stroke means that the machine can also be used as a deep drawing press. All machining processes are performed with a high press force of up to 200 tonnes, which, combined with the highly dynamic slider, guarantees the b ...
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.08.2003 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Drive: 6 x 2 Certificate of Registration: EM250897
Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451
Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
CNC Vertical Machining Center DECKEL MAHO DMF 260 linear NEW DMG Design With rail control Siemens 840 D with Shop Mill Year of Make: 2011 Travel: X 2600 Y 700 Z 700 Speed range: 20 – 14000 rpm infinitely variable ( SK 40 ) With the following accessories: Rigid angle table 2920 mm x 750 mm clamping surface Controlled swivel milling head ( B axis ) NC Dividing head Hofmann with tailstock tip height: 200 mm Vertical tool changer with 40 magazine positions ( SK 40 ) Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ 40 bar Chip conveyor Operating mode 3 + 4 2 x Rotoclear (rotating lens) Partition wall Coolant Setup Control cabinet cooling unit RITTAL 4 Height Adjustable Machine Shoes Operating instructions
Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
LNS PB 80 / Bar Chamfering Machine / Sharpening Machine -CE marking - Chamfer diameter - 30 degrees 8-80mm - Chamfer diameter - 45 degrees 8-60mm -Turning diameter 10-60mm -Max turning length 40mm -2x speeds -Power 0.0-1.65 KW -Three-jaw chuck -Adjustable material support -Documentation Dimensions: LxWxH 1x0.7x1.6 meters / Weight 400 kg
This single head Alfa Laval Astepo Aseptic Pilot Filling System for bag-in-box (PTAF) system is a filling system for filling of a wide range of food and beverage products info appropriate bag-in-box bags under aseptic conditions. The PTAF filling system has been designed for use in laboratory and pilot applications as well as for taking sterile samples in aseptic industrial plants. A fail safe system continuously controls the sterile conditions. In case of an unexpected risk of sterility loss the equipment aborts production and notifies the operator. The PLC only allows for return to production mode after all the necessary parameters for sterility have been reset succesfull., This PTAF aseptic pilot filling system is designed for 1-20 litre (1/2 - 6 gallons) sterile bags of the bag-in-box type. It is available with a 1 inch filling valve for liquid products, dense and viscous. It is also ...
This machine is a batch butter churn which produces butter from cream obtained in a previous process from raw milk by separation. The cream is beaten and pushed in a rotating cylinder, forming butter granules which separate from the buttermilk during the process. The buttermilk is continuously skimmed until pure butter remains as the final product. Total volume: 550 liter - cream in max: 275 liter - output butter: 137,5 kg per batch. Manhole on the side for filling / emptying. Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz. New simple control panel with frequency converter for speed adjustment by simple button click, forward/reverse switch, emergency stop and main switch., Type of Machine: Butter Churn, Volume: 550 liter, Capacity of butter: ± 137,5 kg/batch, Diameter of the drum: 85 cm, Length of the drum: 100 cm, Motor: 2,8 kW - 1.460 rpm - 380 V - 50 Hz, Year of Major Service: 2024, Opera ...
CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...
Complete falling film vacuum evaporator, previously used for infant milk, consisting of 5 bi-thermal effect TVR Evaporator with a direct steam injection (DSI) pasteurizer and an expansion chamber. Still mounted in the Danone plant in France till end of March 2026. The product feed rates in the installation can vary between 14 and 23 t/h with a comparative temperature between 78 and 54°C from the 1st to the 5th effect. The system is heated primarily by injecting steam into the thermo-compressor. The preheating of the incoming product is achieved via tubular heaters supplied by vapours drawn from the beams. A direct steam injection pasteurizer and expansion chamber is provided to pasteurize the product in a range of 118 to 133 °C., Line modified in 2000 to replace the mixing condenser with a tubular condenser and installing the heat treatment with direct steam injection., The evaporator ...
maximum number of results exceeded
please refine your search
