132,800 used machines on RESALE, but how to find them? Machine Search
Conveyor dimensions: 28cm wide x 9cm high Belt width 30cm Inlet height 152cm Push-out by trigger belt External dimensions 90 x 250 H 175cm mobile
Saw blade Ø: 360 mm Cutting range at 90° round: 110 mm Cutting area at 90° rectangle: 110 x 400 mm Cutting range mitred at 45° round: 110 mm Cutting area mitred at 45° rectangle: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space requirement: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg
Lippert belt conveyor GF 9600-750-600 RA2375 Technical data: Conveyor length (NL): 9600 mm Frame width (NB): approx. 750 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 9600 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sic ...
Offer 17500 Spot welding gun Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm spacing approx. 200 mm - Arm diameter approx. 50 mm - Double lifting cylinder type X - Z force at 10 bar approx. 2400 daN - Working stroke approx. 20 mm - Arm spacing approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg
x-travel: 4.000 mm y-travel: 2.100 mm z-travel: 1.000 mm taper ISO: ISO 50 Number of revolutions: 5.000 rpm table-size: 4.020x2.010 mm table weight: 12.000 Kg Control: Heidenhein iTNC530 Tools place: 32 fach rapid taverse: 15.000 mm/min total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 10680x5600x5100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Crushing system force: 120 t, Open box dimensions: 5000x2400 mm, Engine: Scania, Type: diesel, Year of construction: 2001
Key data: 3000 kN, 3268 g/PS, 100 mm
LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4
3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg
2x Water Pumps NEW 22kW 230m³/h H: 22.5m n: 1450 min LENZE electric motor type MDERAXX180-32J 22kw 1470min
VA-11. Inhibitor System / Glycol Injection (B 640) Partial system, 1 tank functional, cleaned, Built: 1990 Complete system (pumps, control, etc.) Manufacturer: LEWA GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.25m; Length approx. 2.5m; Mass per unit 2.0t; Volume 2700 l Find more here - / Contact us at -
Alfa Laval PAPX 307 SGD -11G Purifier Alfa laval PAPX 307 purifier Bowl - stainless steel Hydraulic capacity 8.000l/h Motor 7.5 kW
Key data: 560 KW, 700 kVA, 400 V
Cummins / Leroy Somer Diesel Generator capacity 700kVA. Leroy Somer generator type: LSA 49.1 M6 C 6/4. Cummins dieselengine type: KTA-38-G1. Used as emergency power generator. Low running hours. With control cabinet, documentation and schemes/drawings. Transport can be arranged upon request. Please enquire with seller.
ID3502 OMAG Plant for large-diameter pipes / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers
- Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster - Dome NW 400 mm with swivelling cover
Touches 3-points Steady Ø 800 mm for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg
Bottle inspector Krones / Germany Type Linatromic 735 Full Inspector With automatic rejection Year of construction: 2011 FILM AVAILABLE - PLEASE REQUEST
Manufacturer: Laska Type: KU 200 V.DC Model : 0214 Year of construction : 2012 Power: 97 kW Weight: 4300 kg Length x width x height: 3900 x 2300 x 1660 mm Connection: 400V 50 Hz Bowl volume: 200 L - Cutter Vacuum 200 L - With feeder and ejector Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60
Tank crest: Airlock DN50 Front: Clapper bottom Manhole 350x450 mm oval Tasting tap Nozzle Flap Size 37 DN100 forward-drawn outlet surround with DN32 disc valve Properties: Volume;: 2100 L Material: V2A (AISI 304) 1.4301 Design: horizontal Last Use: Food Length: 1750 mm Cylinder length: 1000 mm Diameter: 1400 mm Surface inside: 2B=IIIC ground Surface outside: 2B=IIIC ground Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.
Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg
surface area: div. / 25025045 / 1251 mm Shipping weight: ? ca. 1500 kg Packing: ca. 1,20,80,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Color filling control for detection of under-mixing, size, position, fragments and overfilling Adjustable illumination Max. length x width of blister web 180 x 100 mm Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill 21 CFR Part 11 compliant. Touch panel
Used AHT Lisboa wall-mounted refrigerated cabinet made of high-quality steel/glass with sliding doors. Temperature 0 to +2 degrees. LED interior lighting. Dimensions: L 210 or 250cm, D 109cm, H 166cm. The Lisboa wall-mounted refrigerated cabinet is the perfect solution for your sales floor: excellent cooling performance, energy-efficient operation and a modern, attractive design ensure that your products are always fresh, attractive and optimally presented. Thanks to flexible shelves, intuitive operation and durable materials, the Lisboa model adapts to your needs and impresses with its reliability. Ideal for supermarkets, restaurants and convenience stores – increase customer satisfaction with this high-performance wall-mounted refrigerated cabinet! Specifications • Length: 210 cm or 250 cm • Depth: 109 cm • Height: 166 cm • 2 rows of shelves plus lower shelf • ...
New longitudinal veneer splicer Brand: CASATI Type: LINEA 1250 Technical details: Arm length 1.250 mm Veneer thickness 0,4 - 4 mm Min. veneer length 350 mm Min. veneer width 45 mm Glue for pre-gluing: Urea and PVA Glue for integrated gluing: Urea Feed speed 10 - 40 m/min. Heating area length 1.250 mm Total connected load 7,4 kW Power consumtion approx. 6 kw Compressed air consumption 5 Nl/min Compressed air pressure 6 - 8 bar This machine permits the longitudinal splicing of veneer sheets by applying glue on their edge. Immediately afterwards the veneer will be passing through a heated zone in order to activate the glue reaction: the glue will be hardening thus bonding the veneer sheets. The integrated glueing device allows the joining by one only process. Its also possible to bond pre-glued veneer sheets Option for an extra charge: Cooling device for the glue po ...
Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 800 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 2000 mm height above floor level: 700 mm SLIDE table surface (left-right): 2000 mm table surface (front-back): 2000 mm stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 400 mm/s working velocity min.: 5 mm/s working velocity max.: 160 mm/s return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1700 mm distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS total power consumption: 370 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 81000 kg ATTACHMENTS (PRESSES) press automation: yes gripper transfer system ...
CONTROLS PLC SIEMENS S7-400 PRESS DESIGN drive system: hydraulic number of suspensions: 1 slide ejectors / cushion: no table cushion: no opening in table: no feedstock transport direction: back-front PRESS FORCES total force (nominal): 1000 to PRESS TABLE table surface (left-right): 2066 mm table surface (front-back): 2000 mm height above floor level: 630 mm SLIDE stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 600 mm/s working velocity min.: 15 mm/s working velocity max.: 40 mm/s return velocity max.: 390 mm/s return force: 100 to TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1710 mm distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS total power consumption: 160 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS height abov ...
Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l
Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.
This 3-axis Okuma LB2000EXII MC was manufactured in 2013. It features a maximum swing diameter of 580 mm and a maximum machining diameter of 360 mm. The machine includes a turret head with 12 tool positions and a rapid traverse speed of 25 m/min on the X-axis. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EXII MC horizontal turning machine we have for sale. Contact us for further details.
Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 200 mm. It includes a spindle speed range of 60â4,000 rpm and a turret with 12 stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details.
This 4-axis LOLA BH 110 CNC was manufactured in 2005. It features a generous X-axis travel of 1750 mm, Y-axis travel of 1650 mm, and Z-axis travel of 630 mm. The working table measures 1550 x 1250 mm and can support a load of up to 4500 kg. If you are looking to get high-quality boring capabilities, consider the LOLA BH 110 CNC boring machine we have for sale. Contact us for further information.
Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton
; Gross weight [kg]: 1574; Accessories: SAE 1
Flywheel size: SAE4, 2 units available; Gross weight [kg]: 87; Accessories: Including: 3 current transformers
Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.
Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 150 mm. It offers X-axis travel of 220 mm and Z-axis travel of 620 mm, with a spindle speed range of 40 to 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details regarding this machine.
The scope of delivery includes: 01x Steel panel, used Material colour: sendzimir galvanised Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Truss support: approx. 58 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 15,00 Kg Note: - The steel panels have a border for the trusses on one side. (Height: approx. 25 mm) - The other side is continuous and serves as a 22 mm high upstand Push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 03 pieces 3,000 mm – 04 pieces 3,750 mm - 05 pieces Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged sepa ...
number of controlled axis: 7 workpiece weight: 7 kg weight of the machine ca.: 0,024 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good
maximum number of results exceeded
please refine your search
