l ds 95 used for sale

Venus Bliss is a non‐invasive lipolysis machine. It employs 4 diode laser applicators to reduce fat via lipolysis, and an (MP)2 applicator that combines Multi-Polar Radio Frequency and Pulsed Electro Magnetic Fields with advanced VariPulse™ technology to reduce cellulite around the abdomen, buttocks, and thighs for a smoother, more contoured appearance and it boosts the lymphatic circulation. Find more here - / Contact us at -

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

Capacity:?up to 25.000 l/h

Alfa Laval Drehb?rstensieb

Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - / Contact us at -

Plastic screwcap

IWKA/Netzsch/Laetus/Mettler Toledo Garvens/Skinetta complete tube filling & packing line for conical aluminium tubes comprising: IWKA TZK 200 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 16 to 45 mm and a maximum tube length of 235 mm, rod length up to 750 mm, compressed air 6 bar, capacity up to 200 tubes per minute IWKA TFS 30 tube filling & closing machine for double & three fold, tube diameter from 10 to 40 mm, tube length from 50 to 250 mm, filling volume from 1.5 to 350 ml. (with suitable dosing pumps), capacity up to 200 tubes per minute, includes Netzsch BEF200 barrel/drum emptying system, automatic transfer of the filled tubes into IWKA CPS-R horicontal cartoning machine, continuous motion, carton size range A (width): 16 – 80 mm, B (height): 25 – 125 mm, C (depth): 55 – 180 mm, GUK flat sheet leaflet folder, Laet ...

working direction: left-right

Used 500 l capacity stainless steel mixer. Two agitators: - slow rotary (frame) 30 rpm Mixer speed adjustable as required. - fast-rotating (propeller) 1380 rpm. Installation and control for circulating pump.

Working Way: Right-Lift

This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details.

This 3-axis Wenzel LH87 was manufactured in 2010. It features an X-axis travel of 800 mm, Y-axis travel of 1500 mm, and Z-axis travel of 680 mm, with a maximum table load of 1000 kg. The machine includes a Renishaw probe system and integrated rotary indexing table. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH87 CMM machine we have for sale. Contact us for further details.

LVD PP 80 ton x 3100 mm

We sell 200 x Lenovo T480, T490, T560, T570, T580, T590 notebooks German Keyboards The notebooks have been operated in Germany and are without power supply. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are on ...

We sell 30 x PCS SL8500 LTO7 tape drives / IBM In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these  ...

Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 2500 mm grinding width: . mm workpiece height: . mm magnetic plate size: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Working length: 6100 mm Bending capacity: 3.0 mm CNC control: 400 A Bending angle: 143° Distance upper beam – table: 200 mm Projection: 1,050 mm Foot step switches: 2 pcs. Motor power: 11.5 kW Dimensions (length x width x height): approx. 7000 x 1500 x 1850 mm Weight: approx. 9.5 tons

Key data: 850 KW

2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...

Thermo Scientific LTQ Orbitrap - Hybrid Ion Trap Mass Spectrometer LC/MSn in high resolution at an affordable price! Including: Ion Max ESI Source, HCD Collision Cell, backing pumps and Thermoflex 900 chiller. Fully tested with 3 months warranty. HPLC / UPLC / nanoLC available for an extra charge, installation in D/A/CH/NL possible.

rotary table dia.: mm max. dia. of grinding wheel: mm with manual ongoing: 0 manually feed: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller National Lab 67 kW Cooling capacity: 67 kW / 19,1 tons (12/7 — 35°C) Year of manufacture: 2008 Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Sanyo (scroll) Number of fans: 3 pcs. Dimensions: 2.30+0.25x1.33x1.60 m. Weight: 690 kg. Condition: very good

Key data: 130 t, 3100 mm

3000 x 130 ton - Extra Long Stroke 600mm! 8 Axis With tooling / DigiPro angle measurement

For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.

Siemens Sinumerik 828D control system with ShopMill Travel X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Tool magazine for 24 Wkz. SK 40 IKZ Conveyor Measuring Sensors

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 180 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

500 Liters Cylindrical Standing Stainless Steel Tank Polished interior Hinged lid on the top floor Cone

approx. 500 litres stainless steel container Type: Flow tank Content: approx. 500 litres Technical specifications : Swimmer V2A Dimensions approx: Diameter outside 1,180 mm, cyl. Height 500 mm, total height 1,000 mm Outlet DN 65

200 litre stainless steel tank Content: 200 litres Technical specifications : single-walled container, open at the top

200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate

900 litre stainless steel container Technical specifications : Metrics: ca. Diameter: 1,000 mm Cylindrical height: 940 mm plus cone 400 mm Height: 1,850 mm Manhole: 400 mm Outlet: DN 80 disc

Woodward LinkNet 9905-972 Ref J Overhauled Wärtsila Tuning Centre LinkNet 6 CH 4-20mA

Woodward LinkNet 9905-969 6 CH 4-20mA Overhauled Wärtsilä Tuning Centre

Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

power capacity: 12 Nm volt: 210 V ampere: 21,5 A total power requirement: kW weight of the machine ca.: 13 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 30 Kw volt: 400 V ampere: 52 A total power requirement: kW weight of the machine ca.: 255 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lips Drunen W006927795 Printed Circuit Board REV 1 23456789 Wärtsila Tuningcenter

Key data: 7 , 230 mm, 160 mm

SPECIFICATIONS: Maximum processing height: 160 mm Maximum machining width: 230 mm Length of inlet planer: 2100 mm Spindle diameter: 40 mm Number of Spindles: 7 (6 + 1 Universal) Grid table Shaft drive (3.7 kW) Self-braking motors Voltage: 380 V Spindle configuration: 1ST: BOTTOM (5.5 kW) 2ND: RIGHT (5.5 kW) 3.: LEFT movable (5.5 kW) 4TH: RIGHT (5.5 kW) 5TH: TOP (7.5 kW) 6TH: BOTTOM (7.5 kW) 7TH: UNIVERSAL SPINDLE 360° (7.5 kW)

2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - / Contact us at -

For people up to max. 130 kg Lifting height driver's platform: 3350 mm Working height: 5350 mm Net weight: 660 kg Operating hours: 71 h Integrated charger

Used stainless steel semi-automatic capcule filler Capsugel/Lonza Ultra III model CU-4204. Capacitu depending on product, operator and aplication between 4500-33000 capsules per hour. Powder feeder. Control Panel. Year of manufacturey 2019. Overall dimentions: width 1520 mm, depth 890 mm, height 1910 mm, weight 610 kg. Technical docuemtnation for the machine available.

Used tablet counter made by Swiftpack Automation Ltd. England (Now IMA Group_. Model M1366. Year of manufactury 1996. Power 2.5 kW. More info available upon request.

Šmeral Trnava Metal Lepa 63 PA Category: Metal Brand: Šmeral Trnava Model: Lepa 63 PA Year of manufacturing: 1988 Under power: Yes 630 kN

This Linotype model 16A, still in print shop and running on continual basis. In original condition. Second owner more than 40 years. Including 5 magazines for letter format from 6 to 12 points, all serial tools and original brushes for cleaning and spare part manual.