l ds 95 used for sale

0.5 KW 380 V 16 A Discs D 200 mm Swivelling sanding pads Length 0.30 m Width 0.78 m Height 1.10 m Weight 40 kg Color: Green

1.2 HP 0.9 KW 380 V 16 A 2900 rpm Discs D 200 mm Swivelling sanding pads Coolant Setup Length 0.52 m Width 0.90 m Height 1.20 m Color: Green Weight 50 kg

Used cup filler made by HUGART, type: DS20000. New: 2003. This machine is designed for packaging food products in cups. TECHNICAL DESCRIPTION The HUGART DS20000 is a modern, eight-row machine used in the food industry for sealing a full range of food-processed products in plastic packaging. The machine's modern frame design, integrated with a slat conveyor, allows for the installation of a series of primary and secondary workstations for filling, sealing, grouping, and packaging cups into work packages. The use of servo drives allows for smooth adjustment of the machine's output, up to 20,000 packages per hour with capacities ranging from 0.125 liters to 0.5 liters. The machine's primary material is 0H18N9 chrome-nickel steel. The design of the frame and individual workstations is designed to meet the strict hygiene standards of the food industry. DS20000 PACKING MACHINE DIMENSIONS ...

Double spiral mixer DIOSNA, type: DSP 300 AF -In very good condition- - Extendable dough bowls for a maximum of 300 kg of dough or 185 kg of flour - A total of 8 tank cars are available - Condition: very good used condition - Dough bowl size: for 300 kg of dough or 185 kg of flour - El. Connection: 50 Hz, 400 V, 49.2 kW, 90 A Viewing and test run are possible.

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

Complete bottle forming, filling and packing line for 1,5 liter sterilized milk with blowers, filler, capper, sterilization towers, palletizers etc. The line is already dismantled and boxed in crates., General:, Size of the bottles: 1,5 liter milk bottle with stopper (cap), Bottle dimensions: width 93,9 mm, height 282 mm, Weight bottle: 44 gram, weight aluminium 0,4 gram and weight cap 4 gram, Material of the bottle / Compesition: PE (Polyethylene), Neck diameter of the bottle: 46,7 mm, Bottle closed with a aluminum and easy peelable cover, Capacity of the line: 7.000 bottles per hour, Product: Whole cow’s milk, which has been treated with a heating process in such conditions of temperature and time able to ensure the destruction of microorganisms and the inactivity of their resistance forms., Closed bottle shelf life: 6 months since the date of manufacture, Opened bottle: maximum thre ...

This 3D printer was manufactured in 2016. The 3DSYSTEMS ProJet 2500 Plus offers high-definition printing modes, HD and UHD, with resolutions up to 1600x900x790 DPI. It supports a substantial print volume and has a robust frame size of 1397x927x1314mm, weighing 325kg. Ideal for detailed and precise printing tasks, the 3DSYSTEMS ProJet 2500 Plus machine we have for sale is a reliable choice for professional use. Contact us for more information.

double grinder, double grinder, column grinder, column grinder, drill grinder -Double grinder with: water cooling -Grinding disc: max. Ø 450 x 63 mm -Speed: 950 rpm -Engine power: 3.3 kW -Operating voltage: 380 volts -Quantity: 1 pieces available -Price: per piece -Dimensions: 370/370/H1090 mm -Weight: 404 kg

diameter range 3-6 mm shaft length under head 35-120 mm max. cutting length 146 mm output- piece/min 90

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

General SKU007W071 MakeJohann Kreuziger Maschinenfabrik LocationBarneveld TypeDSH/250 Main Features MaterialStainless steel/chrome Motor36 KW Specified Features - Dissolver Dissolvercheck Shaft length700 mm Disc diameterdia. 400mm Between shaft and frame± 400 mm With hydraulic unit1,0 kW (400V) Motor36 kW 380/660 Volt With hydraulic liftingcheck MaterialChromed steel, Stainless steel 1.4552 General No.21298 Year of constructionunknown With switchgear( as is) Floorspace2,6 x1,6 m Total height2,2 m Weight2000 kgDissolversOils & fatPaints & coatingsOintmentsFine chemicalsOther chemicalCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicKreuziger WienMixers > DissolversIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > OintmentsInd ...

General SKU361T1082 MakeFerrum TypeDSZ-OR/T 1000/500 No.414-092 396 Year of construction2001 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Inlet diameter50 mm Specified Features - Basket centrifuge Basket centrifugecheck Rubber linedhallar chamber Perforated basketcheck Capacity200 Ltr. Basket sizesDia 1000x500 mm Max. loading weight250 kg Hydraulic operatedcheck Liquid outletDia. 100 mm With hydraulic unitWandfluh HN10-6nvh, motor: 0,75 kW, 230/400 volt, 1380 rpm Motor11kW, 400/690 volt, 1475 rpm Max. basket speed1200 rpm MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General Mounted on foundation platecheck Floorspace1,8x2,2 m Total height1,7 m Weight2400 kg CEcheck ATEX designedcheck Extra SpecificationsRevised machine!Including: new motor, pulleys, belts, shaft seal, and bearings.Filter area 1.57 m².Centrifugal acce ...

This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools and offers a maximum cutting length of 826 mm. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details regarding this machine.

This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details.

Manufacturer: Karl Mayer Model: DS42/40 Type of Machine: Sharpening Machine Width: 42 inch Yarn Feed: NC Included: Complete with memory and roller aggregate and all Riede Note: Without Gatter Find more here - .ucymachines/ Contact us at - sales@ucymachines

An industrial Hobart conveyor dishwasher is available. Heating: electric, conveyor width: 612mm, conveyor height: 440mm, working height: 920mm, conveying direction: left-right, total connected load: 81kW, water fill volume: 340l, water pressure range: 1.5bar-10bar, DI water consumption: 220l/h, DI water temperature: 12°C, water hardness: 3°dH, conductivity: 80µS/cm, total machine exhaust air: 1500m³/h. Machine dimensions X/Y/Z: approx. 7550mm/1200mm/2150mm. Documentation available. An on-site inspection is possible.

Screw compressor Kaeser DSD202 110 kW 8.5 bar 20.46 m3/min Year of Make: 2009 Hours: 58,438

Crane control, controller, safety control, safety switch, safety sensor, safety relay, control unit, overload trip power sensor, auxiliary switch block, auxiliary switch, contactor, solid-state contactor, contactor, power contactor, capacitor contactor, contactor, contactor, circuit breaker, motor contactor -Manufacturer: DEMAG, Schütz reversing Schütz, unused, original packaging -Type: DSW 3TF 8133 -Item No.: 87535044 -Cardboard dimensions: 165/105/H75 mm -Weight: 0.5 kg

Fully automatic strapping machine DSI DBA 200 Made in Germany. The DBA-200 Automatic Frame Strapping Machine is designed to be very durable due to its robust design, the simple operation and handling, its performance and its sophisticated technology particularly suitable for industrial use. Siemens S7-200 controller. Infinitely adjustable strap tension. Built-in tape storage. Energy-saving design, the motor only runs during strapping operations. Reel holder for quick tape change. Robust construction. Initiators instead of microswitches. Automatic tape threading. With foot switch. Belt width from 9 to 12 mm. Belt tension 5.0 to 80.0 kg. Strapping speed up to 26 straps per minute. Frame size 850 x 600 mm. Product size min. 100 mm (w) x 30 mm (h), max. 850 mm (w) x 600 mm (h). Connection voltage 230 V, 1 phase, 50 Hz. Machine dimensions 1,412 x 600 x 1,545 mm. De ...

Siemens DS1-x motor starter The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table dia.: . mm max. dia. of grinding wheel: . mm with manual ongoing: . 0 manually feed: . 0 0.4 KW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU397X1139 MakeDSP LocationBarneveld CEcheck TypeEF600 Pressure Working pressure7 Bar Vacuum possiblecheck Working pressure jacket5.5 Bar Main Features MaterialStainless steel Surface0.29 m2 Cake220 Ltr. Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,29 m² Capacity220 l. Vessel sizesø 750 x 670 mm Plate sizesø 610 mm Vessel can be tiltedcheck Top connections3x DN25 Liquid outletDN50 With jacket(16 l.) Max. temperature— 10 / 200 °C MaterialStainless steel 1.4301 (304) With jacketcheck General No.439 Year of construction2005 Mounted on wheelscheck Floorspace1,10 x 1,10 m Total height1,75 m Weight560 kgNutsche filtersGeneric medicinesFine chemicalsOther chemicalAgrochemicalsBiotechnologyOther pharmaceuticsCosmeticsBiopharmaceuticalAPIDSPFilters > Nutsche filtersIndustries > Pharmaceutical > Generic medicinesIndustries ...

A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible.

This device works according to the sedimentation principle and is able to separate 90% of rock particles >0.2mm at nominal water throughput. Technical data Flow rate: 100m3/h Solids discharge: 4.8dm3/h Tank volume: 2.94m3 Drive power: 0.55kW Total weight: 1473kg On transport pallets: 1 Pal. 222 x 320 x 240 cm, 789 kg 1 Pal. 105 x 670 x 70 cm, 684 kg The sand separator was always part of a test plant in the interior and was hardly used. The seller takes care of the application to the loading area suitable for trucks.

Number of motors: 2 Stück 0: 3000 mm Control: ja/CNC loading dimensions L x W x H: 4000 x 1500 x 1500 mm Weight: 800 kg HECHT Double Miter Saw Exenso DS350E - 3000 mm -------------------------------------- For wooden glazing beads, mullions, profile strips, aluminum strips, etc. Item 1.1 Article number 942.5103 1 pc. HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Includes 1 pc. center support. - Pneumatic clamping of the components. - Exenso DS3 positioning control with 15 touch panel display in a dustproof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Manual input of cutting data - Processing of data from a cutting list (data set according to specifications) - Processing of measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB ...

STUDER DSA ist eine Schleifscheibenabrichtmaschine und Profilbearbeitungsmaschine mit hoher Präzision, ausgelegt für große Genauigkeit und Zuverlässigkeit. Kapazität: Abrichtdurchmesser 75–250 mm, Flankenwinkel 0–180°; Drehzahl 60 t/min; Abrichtscheibe Ø100 mm, Breite 50 mm, Bohrung 20 mm, Drehzahl 2800 t/min. Technische Daten: Anschluss 50 Hz 3x 380 V; installierte Leistung 0.35 kW; Maschinengewicht ca. 350 kg; Abmessungen L1200 x B550 x H1500 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Werkzeug- und Maschinenbau, Luftfahrt, Medizintechnik, Uhrenindustrie Technische Daten ohne Gewähr

RÖDERS RFM 600 DSP ist ein 5-Achsen-Bearbeitungszentrum für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Rundtisch Ø405 mm, max. 300 kg; Verfahrwege X600 Y500 Z300 mm; 5 Achsen simultan; Magazin 82 Plätze; HSK E40; Spindel 0–42000 t/min; Eilgang 60 m/min. Technische Daten: Spindellaufzeit 7266 h (Wechsel 2016); Anschluss 50 Hz 3x400 V; Gesamtleistung 25 kW; Gewicht ~8500 kg; Abmessungen L4200×B3000×H2700 mm. Zubehör: Kühleinrichtung, Wasserkühler, Werkstücktaster, Laser-Werkzeugkontrolle, Späneförderer, Werkstückmagazin, 31 Rüstplätze, elektronisches Handrad, Beleuchtung. Geeignet für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau und Werkzeugbau. Technische Daten ohne Gewähr

Screw compressor Kaeser DSD281 160 kW 10 bar 23.50 m³/min Year of Make: 2006 Operating hours: 8,482 h

Die-cutting Slitting | Rewinding Web Width 330mm Max Speed 305 mpm May vary with application Max Unwind Diameter 711 mm Max Single Spindle Rewind Diameter 457 mm Max Dual Spindle Rewind Diameter 406 mm The Station Anvil Size 381 mm The Repeat Range 161-381 mm

Key data: 170 mm

Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, ...

General SKU297Y562 MakeCondux TypeCGS32/V-DSF No.93102312 Year of construction1994 Main Features Motor4 KW Inlet diameter100 mm Specified Features - Jet Mill Rotor sizeø 170 mm Grinding room sizeø 340 mm Housing dimensions ø 340 mm InletDN 100 Motor4,0 kW (400 V 2900 rpm) Jet Mills MaterialStainless steel 1.4571 (316Ti) General Mounted on framecheck LocationBarneveld Floor space1,30 x 1,20 m Total height2,00 m Weight580 kg Extra SpecificationsOutput DN80Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Ex-lights for painting rooms: used 45-degree luminaires, recessed wall lamps, room lamps. with 2 or 3 or 4 x 58 W fluorescent tubes, for installation in painting systems. Please ask.

Description Item #8772 – POT FILLING LINE - Line Filling Chocolate Cream/Paste into Pot with Toy Currently producing 18gramme Pots. including: MONDINI Model A/C Tray/Pot Denesting System, LIVETECH Automatic System to insert spoon into pot, Model LSS, with PESCE GROUP MP10 Product Hopper & Elevator Feeder, SARG STM087 Automatic Toy Insertion Machine, to place toy into pot/tray. MONDINI Model VF/SPE Cream/Paste Dosing Unit into the pots MONDINI Model C/T Pot/Tray Lid Thermosealing Unit CICRESPI Model 1602056 Ink Jet Coding Unit LIVETECH Model LSS/LA19947 X-Ray Inspection machine End of Line Belts for packing. line will include the Mould for the Pot/Tray and the Mould for the Spoon

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 99 mm -Price: per piece -Number: 2 pieces -Weight: 9.7 kg

Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg

Jump pads, crack rescue unit System Lansang, used Size 1, type 10 Manufactured by Ziegler not tested without pressure bottle Price: 500.00 Excl. 19% VAT

Laser marking laser marking system, Manufacturer GSI Lumonics Type XYMark, consisting of laser and suction. Geraet untested More information on request Special price

Light curtain Photocell Make: Leuze Electronic Type: SD4R30-1050E 4 pairs, 4x receivers, and 4x transmitters Condition: used but fully functional Only to traders is sold. All information without guarantee

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

From a current recycling we offer you an exclusive lens set. These are 3 CANON lenses "rehoused" by TLS True Lens Services. In detail, they are: 20mm nFD f/2.8 (1990) Serial Number 43174 24mm FD 1:1.4 L (1983) Serial Number 18574 35mm nFD 1:2 (1979) Serial Number 15437 The serial numbers were queried and confirmed from TLS. Year of manufacture: see brackets Condition: good Asking price: VHB Factory Price: Location: 10553 Berlin Equipment / accessories / other information: Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. The sale is without warranty Subject to prior sale

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Control: Max.travel range: X mm Y mm Z mm Wave length: um Average power: Watt Max. peak pulse power: kW Laser crystal: the beam source is damaged Made in Germany

Key data: 460 mm

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!