l ds 95 used for sale

DC, geared motor -Power: 3 kW -DC motor: Manufacturer Baumüller, type DSG -Speed: 6000 rpm -Transmission: Manufacturer Nord Type 2282AZ-IEC 80 -Translation: 1:11,81 -Hollow shaft diameter: 35 mm -Speedometer: Manufacturer Stegmann Type DG 60L XSR 500 Pulse/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

Three-phase synchronous motor, geared motor, electric motor, servo motor -Manufacturer: Baumüller, Servomotor three-phase synchronous motor -Type: DSOG 100-K -Speed: 3000 rpm -Power: 11 kW -Transmission: SEW type R82 LP90 i= 10.22 -Speed: 1400 / 137 rpm -External fan: W2S130-AB03-10 -Shaft: Ø 50 x 100 mm -Design: B3 -Brake -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: 1050/285/H345 mm -Weight: 116 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering -Manufacturer: KTS, heavy-duty transport trolley type DSL with steel tube attachment -Industrial trailer: with 1-axle turntable steering -unbraked, brake not functioning -Platform: intermediate size 2000/800/H605 mm -Load capacity: max 5000 kg -Tires: solid rubber -Maximum speed: 6 km/h -Brake -Trailer coupling: for industrial trailers -Number: 3 transport trolleys available -Price per piece -Total dimensions: 3690/1000/H705 mm -Dependent weight: 460 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer with 1-axle turntable steering Type: DSL braked -Platform: 2000/1115/H600 mm, dimensions see photo technical drawing -Load capacity: max. 5000 kg -Tires: solid rubber -Trailer coupling for: Industrial trailers -Total dimensions: 3630/1115/H1540 mm -Own weight: 450 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer -Manufacturer: KTS, Heavy-duty transport wagon industrial trailer type DSL with 1-axle turntable steering Type: DSL -Platform: 2000/1000/H610 mm -Load capacity: max. 5000 kg -Tires: Solid rubber -Overall dimensions: 3560/1000/H610 mm -Empty weight: 300 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers -Manufacturer: KTS, heavy-duty transport vehicle industrial trailer type DSL with 1-axle turntable steering Type: DSL -Platform: 2000/1115/H610 mm, dimensions see photo technical drawing -Range height: 1400 mm (welded) -Load capacity: max. 5000 kg -Tires: solid rubber -Transport dimensions: 3620/1115/H1540 mm -Own weight: 440 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-180-PPS-A with proximity switch -Stroke path: 180 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 -Dimension: 330/38/H65 mm -Weight: 0.6 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke path: 125 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm / M 10 x 1.25 -Quantity: 2x cylinders available -Price per piece -Dimension: 280/42/H65 mm -Weight: 0.6 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Festo, standard cylinder type DSN-25-25-P -Stroke distance: 25 mm -Piston: Ø 25mm -Piston rod: Ø 10 mm / M10 x 1.25 -Quantity: 1x cylinders available -Price per piece -Dimension: 170/27/H47 mm -Weight: 0.3 kg/pc.

Gear motor, electric motor, electric gear motor, gear motor Movigear classic -Manufacturer: SEW-Eurodrive, gear motor Movigear classic -Type: MGFAT2-DSM/WA/PE -Speed: 3.6...36.2 rpm i= 55.25 -Connection voltage: 400 V -Torque class: 200 Nm -Hollow shaft: Ø 30 x 90 mm -Protection class: IP66 -Dimensions: 250/150/H300 mm -Weight: 14kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece

Fuel gauge, oil conveyor, oil dispensing system, oil station, fuel pump, tank data acquisition, tank system display, DSS microcomputer -Manufacturer: Tecalemit, DSS data interface -Art.No.: 2.78 11 10.1 -Smallest measuring quantity: 0.5 liters -Volume flow: 1 to 10 l/min -DSS Microcomputer: 1.575001.1 -Dimensions: 370/280/H180 mm -Weight: 8.2 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as inspected -Housing damaged, cable without connector, see photos -Manufacturer: Demag, crane remote control control unit -Cable length: 2.0 m / 5-core -Dimensions: 500/300/H100 mm -Weight: 1.9 kg

gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor with brake -Type: DSFG-12/30-0511 .208.60-N-B3 -Gearbox: Type 12 -Speed: 74/8 rpm -Power: 1.1 kW -Design: B3 -Shaft: Ø 30 x 60 mm -Protection class: IP 44 -Brake: 96 V 0.48 A -Dimensions: 680/250/H245 mm -Weight: 43 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Baumüller, servo motor with brake -Type: DSCG 045 A65U40-5 UL -Power: 0.46 kW -Speed: 4000 rpm -Technical data: see photo type plate -Shaft: Ø 14 x 30 mm -Number: 3 motors available -Price: per piece -Dimensions: 215/94/H135 mm -Weight: 3.6 kg/piece

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Spindle Motor, Permanent Magnet Three-Phase Servo Motor, AC Spindle Motor -Manufacturer: Baumüller, servo motor with brake -Type: DSCG 045 S65U40-5 UL -Power: 1.2 kW -Speed: 4000 rpm -Technical data: see photo type plate -Shaft: Ø 14 x 30 mm -Number: 2 motors available -Price: per piece -Dimensions: 255/93/H140 mm -Weight: 5.3 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-300-PPVA-N3A2 -Stroke travel: 300 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 515/235/H95 mm -Weight: 7.0 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-160-PPVA-N3 -Stroke travel: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available Price: per piece -Dimensions: 520/95/H170 mm -Weight: 5.2 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-320-C-PPVA -Stroke travel: 320 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Hole: Ø 12 mm -Max. pressure: 12 bar -Number: 4 cylinders available -Price: per piece -Dimensions: 580/55/H130 mm -Weight: 2.6 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-125-PPVA-N3 1376661 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 2 cylinders available Price: per piece -Dimensions: 290/53/H92 mm / 290/55/H55 mm -Weight: 1.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-50-50-PA 196002 -Stroke travel: 50 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm / M16 -Max. pressure: 10 bar -Number: 4 cylinders available Price: per piece -Dimensions: 315/60/H90 mm -Weight: 1.4 kg/piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm -Weight: 3.5 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 7 cylinders available - Price: per piece -Dimensions: 290/35/H32 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-200-PPV-A 19242 -Stroke travel: 200 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 335/27/H55 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 290/27/H55 mm -Weight: 0.3 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-85-PPV-A 14322 -Stroke travel: 85 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 225/27/H50 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-125-PPV-A 19249 -Stroke travel: 125 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 4 cylinders available -Price: per piece -Dimensions: Ø27 x 265 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-S-25-15-PPS-A 8112006 -Stroke travel: 15 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 130/27/H45 mm -Weight: 0.2 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-8-80-PA 19181 -Stroke travel: 80 mm -Piston: Ø 8 mm -Piston rod: Ø 4 mm / M4 -Max. pressure: 10 bar -Number: 6 cylinders available -Price: per piece -Dimensions: 165/15/H30 mm -Weight: 0.1 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-16-30-PPV-A 1908269 -Stroke travel: 30 mm -Piston: Ø 16 mm -Piston rod: Ø 6 mm / M6 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 140/20/H40 mm -Weight: 0.1 kg

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 71-S -Transmission: SEW-Eurodrive type KA46 LP90 -Speed: 3000 rpm -Power: 6.8 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 35 mm -Brake -Protection class: IP 54 -Weight: 50 kg -Number: 4x motors available Price: per piece

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-M -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 22 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 65 mm -Brake -Protection class: IP 54 -Number: 4x motors available Price: per piece -Dimensions: 1150/300/H400 mm -Weight: 180 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-S -Transmission: SEW-Eurodrive type -Speed: 3000 rpm -Power: 18 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Number: 3x motors available Price: per piece -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSOG 100-K -Transmission: SEW-Eurodrive type KA86 LP112 -Speed: 3000 rpm -Power: 11 kW -Brake -External fan -Design: Hollow shaft -Shaft diameter: Ø 70 mm -Brake -Protection class: IP 54 -Weight: 150 kg

Three-phase synchronous motor, geared motor, electric motor -Three-phase synchronous motor: Baumüller type DSG 56-S -Gearbox: Nord SK. 02053F-IEC 80 -Speed: 6000 rpm -Power: 2.9 kW -Brake -Speedometer -Shaft diameter: Ø 25 mm -Brake -Protection class: IP 54 -Dimensions: 630/250/H190 mm -Weight: 35 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 25 mm -Piston diameter: Ø 25 mm -Piston rod: 10 mm (connection M 10 x 1.5 thread) -Total length: 165 mm -Total length extended: 190 mm -Air inlet and outlet: adjustable Price: per piece -Quantity: 3 available -Weight: 0.3 kg

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

Several Wafios wire processing machines with two payoff reels are available. 1) Wafios N90, year of manufacture: 2003. Including Wafios AHL 41 D-M payoff reel, year of manufacture: 2002. 2) Wafios DS 80. 3) Wafios N5. 4) Wafios AHL 41 DR wire payoff reel, year of manufacture: 1998. 5) Wafios AHL 41 D wire payoff reel, year of manufacture: 1997. All machines including payoff reel. An on-site inspection is possible. Individual sale possible.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.