133,845 used machines on RESALE, but how to find them? Machine Search
60 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 4.5 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 3.950,-- net from stock Offer consists of: + 17 frames pre-assembled, depth 110 cm, height 4.5 m + 64 beams, length 3.6 m, 4000 kg load/compartment +128 pcs Suspension Devices + 68 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pal ...
Line choke, air gap choke -Type: ELN1-0900H005 -Price: per piece -Quantity: 6x Available -Weight: 1 kg
Leonhardt AG2 Twin head dosing machine Serial: 1401449 2016, Industrial dosing machine, 150Kg stainless agitated hopper, dosing area 200 -750 ccm per cycle and pump position, 6Kw max output, with level sensor, siemens HMI controls, mobile, with manuals and drawings, 3Ph
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 1/N/PE AC 230V 17A 50/60Hz -Output: 3/AC 0-230V 9.5A 2.2kW 0-480Hz -Dimensions: 80/280/H215 mm -Weight: 4 kg
Brake module, brake unit, brake chopper Manufacturer: Lenze, brake module type EMB8252-E -Input: DC 725V Imax = 2.7A Output: Pav = 70 W Ppk = 2 kW -Number: 6x converters available Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.4 kg
Brake module -Input: DC/PE 765 V Imax = 25 A -Output: Pav = 19 kW Ppk = 32 kW -Number: 4x converters available -Price: per piece -Weight: 3 kg
geared motor electric motor -Speed: 189 rpm -Power: 0.55 kW -Design: Hollow shaft angle B5 -Shaft diameter: 20 mm -Protection class: IP 55 -Weight: 12 kg
Hydraulic pump, oil pump, gear pump -Recording wave: Price: per piece Quantity: 2 available -Dimensions: 170/120/110 mm -Weight: 4.3 kg
Hydraulic pump, oil pump, gear pump -Recording wave: -Dimensions: 180/160/120 mm -Weight: 4.5 kg
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
318 m pallet rack Bito P5 Used goods very good condition, see pictures. Height 9 m Depth 110 cm, galvanised Bay load 16000kg Strap length 3.6 m blue Carrier with Load / Compartment 4000 kg Negotiation price: € 36.950,-- net from stock Offer consists of: + 87 pcs frame pre-assembled, depth 110 cm, height 9 m + 688 beams, length 3.6 m, 4000 kg load/compartment +1376 pcs Hook-in safety devices + 348 pcs concrete anchors Used corner protectors immediately available, surcharge per piece 15,- € net! Other accessories such as clamping plates, insert grids, etc. on request. Payload signs, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metre ...
Key data: 220 KW, 274 kVA, 400 V
gebr, emergency power generator in the container
Automatic high speed cartoner which is currently packing boxes of cereal/protein bars.
Eyelet machine Hang 103 LOK, machine number 30621, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Sigmagyr RVP210.1 -Weight: 0.8 kg
adjustable geared motor, electric motor, electric geared motor -Speed: 14-70 rpm -Power: 4 kW -Design: B5 -Shaft diameter: Ø 48 x 110 mm -Protection class: IP 54 - Electrically adjustable: via geared motor -Dimensions: 1100/350/H600 mm -Weight: 250 kg
calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800
-Brake module -Input: 375 VDC 5.4 A -Output: PAV = 70 Ppk = 2 kW -Weight: 3 kg
Position scanner, laser, barcode scanner -Type: LS50HR3 -Voltage: 4.75-28 VDC Price: per piece Quantity: 2 available -Weight: 0.7 kg
used
1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 2 milling cutters Price: complete -Weight: 11 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7.5 kg
Offer 24109 Specifications: - 4 spaces for 50L. bottles - Full-length bottle cage - Exhaust air opening - Closet is lockable , key is provided - Required space W 1400 x D 465 x H 2150 mm - Weight approx. 120 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete -Weight: 9.5 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 2 milling cutters Price: complete -Weight: 12 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm -Number: 2 milling cutters Price: complete -Weight: 8.5 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg
Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg
CNC lathe Okuma Genos L300E-M incl. Samsys bar feeder M3000SL Control: OSP-P200L-R Turning length 1,250 mm Turning diameter 300 mm Spindle passage 70 mm Turret: 12 seats – all powered Speed: 45 – 4,500 rpm Tool holder: VDI 40 Accessories/Equipment -Conveyor - 3- Jaw chuck Ø 250 mm - Collet chuck Hainbuch - Touchsetter -Tailstock -Coolant pump - Samsys Multi 3000SL bar feeder - various accessories (see pictures)
Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg
Wood milling inserts, knife inserts, form milling inserts -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm -Price: complete -Weight: 0.8kg
Wood milling inserts, knife inserts, form milling inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 7.5mm -Price: complete -Weight: 0.8kg
Table clamping surface: 765 x 400 mm Travel x/y/z: 650/410/510 mm Spindle holder: BT 40 small/large distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8000 rpm Number of tool positions: 20 pieces Feeds: approx. 30 m/min Rapid traverse: approx. 30 m/min electr. Connection: 380 V, approx. 15 kVA kW Space requirement: 2300 x 2100 x 2650 mm Weight: 4000 kg
Wood router bit inserts, knife inserts, form cutter inserts -Blade width: 39 mm -Blade thickness: 2 mm -Radius: 15 mm -Price/Sale: complete -Weight: 0.9 kg
Programmable rotary encoder, GEL 2444KM1G5K030, Lenord & Bauer, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
sheet width - max.: 0360 mm coil weight: 3,00 t coil internal dia.: 380 - 520 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: 1,80 x 1,80 x 1,70 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine: joining, veneer cutting machine Brand: Langzauner Type: LZ 4/2E 3.050 Year of Make: 1998 CE Specifications: Working length: 3,050 mm Cutting height: 45/55 mm Motor power: 2.2 kW each Suction duct: Yes Support table rear: Yes, 3,050 x 500/800 mm, with hinged insertion shoes for stop depth 800 mm Rear Rip Fence: Yes, 650/ 800 mm, incl. digital display Rack & Pinion Balancing: Yes Milling unit: Yes Front support table: Yes, movable Saw carriage feed: via electric motor drive and Stepless speed control
Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)
High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.
maximum number of results exceeded
please refine your search
