l dh 120 used for sale

Axial piston pump, hydraulic pump, oil pump, gear pump -Manufacturer: Rexroth -Pump: Type LA10VS0 45 DFLR/31R-PPA12N00 -Electric motor: Siemens -Type: 1 LA5163-4AA96-Z IEC160M -Drive: 11 kW -Speed: 1460 rpm -Dimensions: 950/500/H510 mm -Weight: 138kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Key data: 45 °, 3800 mm

SPECIFICATIONS: Max. saw blade diameter mm: 400 Saw blade inclination: 0° - 45° Saw carriage length mm: 3800 Installed capacity: Hp 7.5 Scoring diameter mm: 120 2 angle stops

We sell here a cooking system from the manufacturer ASCA Consulting in a very good used and functional condition. The system is built in 12/2014, electrically heated, 400 volts, 20 kW, chamber volume 1800 litres, Aditec MKA 110 control, workshop tested, ready for immediate use, dimensions W/D/H 170/140/255 cm, others on request.

Refrigerated display for promotional products to increase the sales. In very good conditions, suitable for every supermarket. Thecnical features: Dimensions 200x100x90h Power input 220 Volt Gas Propane R290 Automatic defrost Digital display Working temperature 0/+8°C Each product is refurbished, tested and cleaned internally and externally. Ready to use

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5166-4AA91 -Power: 15 kW -Speed: 1455 rpm -Shaft: Ø 42 x 110 mm -Design: B5 -Protection rating: IP 54 -Dimensions: 630/355/H400 mm -Weight: 97 kg

Muffler, exhaust system, tailpipe, silencer, exhaust muffler -Silencer: for Linde H60D -Type: G 4979 0694 unfortunately no more precise designation -Dimensions: see photos -Overall dimensions: 1560/370/H230 mm -Weight: 11.2 kg

Alfa-Laval liquidring pump. MR200. 7.5 KW. Only 1 more available Fully tested, excellent condition

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Max 15 BAR 4KW 380 RPM Excellent condition

Welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor -Manufacturer: Messer Lincoln mobile welding fume extraction -Type: Fumatech MF 1100 -Drive: 1.1 kW -Suction arm: length 3530 mm -Transport dimensions: 1200/560/H2320 mm -Weight: 84 kg

Waukesha Rotary lobe pump 060 7,5 KW 1440 RPM Excellent condition

Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark

Alfa-Laval centrifugal pump fully overhauled YOM 1999 18.5 KW 2920 RPM

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Point, Incremental Rotary Encoder -Type: EI281B500ZE5LP/LD1 -Hollow shaft: Ø 15 x 26 mm -Dimension: 80/61/H48 mm -Weight: 0.3 kg

Spiral seal, labyrinth housing seal, flange seal -Manufacturer: ISW, spiral seal: flange seal 5 pieces/package -Type: 4 Class 300 lbs like Spiraltherm 304SS with inner and outer ring -Quantity: 4 packages available -Price: per package -Dimension package: Ø180 x 30 mm -Weight: 1.8kg/package

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, geared motor type GST04-2M VCK 071C32 -Speed: 44.6 rpm / Torque: 77 Nm -Power: 0.37 kW -Shaft: Ø 20 x 40 mm -Protection rating: IP55 -Dimensions: 395/200/H160 mm -Weight: 11.7 kg

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Electric motor, three-phase motor, pulley motor -Manufacturer: Himmelwerk, electric motor with pulley on both sides -Type 2 L12/5.5 2LS80 -Power: 1.1 kW -Speed: 2780 rpm -Pulleys: Ø 120/155 mm -Design: B3 -Protection class: IP 44 -Dimensions: 325/185/H155 mm -Weight: 10.2 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type AFS 63/4 -Power: 0.22 kW -Speed: 1307 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Dimensions: 235/116/H160 mm -Weight: 5.4 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5060-4AB90-Z -Power: 0.18 KW -Speed: 1300 rpm -Shaft: Ø 11 x 25 mm -Design: B3 -Protection class: IP54 -Dimensions: 215/125/175mm -Weight: 3.6 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

monitor, text display, text monitor -Manufacturer: Lauer, text display -Type: LCA -Dimensions: 255/110/H75 mm -Weight: 1.1 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Electric motor, three-phase motor -Manufacturer: Lammers, electric motor type XF 225 S04 -Power: 37 kW -Speed: 1475 rpm -Shaft: Ø 60 x 115 mm -Design: B3 -Protection class: IP54 -Dimensions: 835/480/H565mm -Weight: 378 kg

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5166-4AA70 -Power: 15 kW -Speed: 1460 rpm -Voltage: 380/660 V -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 54 -Dimensions: 640/310/H395mm -Weight: 88 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.602.12.1.4 i 31.5 -Shaft: Ø 60 x 120 mm -Dimensions: 650/355/H395mm -Weight: 113 kg

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Key data: 205 mm, 650 mm

For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.102.60.1.1 i 37,80 -Shaft: Ø 60 x 140 mm / Ø 38 x 80 mm -Dimensions: 575/295/H370mm -Weight: 87 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gearbox type R803-LP90 i 186,65 -Speed: 7.5 rpm at 1400 rpm -Shaft: Ø 50 x 100 mm / Ø 16 x 16 mm -Dimensions: 490/290/H310mm -Weight: 68 kg

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 13,600 mm Number of bays per row of shelves: 05 pieces á 2,600 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Frame Type: TC15 Profile dimensions: 100 x 80 x 1.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 5,950 mm high 750 mm deep 40x Pallet rack crossbeam, used Material color: blue Box profile: 90 x 50 mm Truss Type: RTS90 Agraffe: 3 HK (hook) Clear width: 2,600 mm max. load per pair of trusses 1,500 kg at the same weight. Distributed Load 80x locking pins, used Execution: complete galvanized To secure ...

Electric motor, three-phase motor -Manufacturer: Lammers, electric motor type 7AA90L04 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP55 -Number: 3x motor available -Price: per piece -Dimensions: 330/173/H220mm -Weight: 16 kg/piece

Tumbler Soma, approx. 80 liters volume, completely in stainless steel, with vacuum pump and timer, Connection 400V, dimensions LxWxH approx. 117x97x120cm, weight approx. 230kg, older device, good used condition, fully functional