l dh 120 used for sale

Pneumatic pressure switches -Type: PEV-WS-LED-GH -Adjustable pressure: 2-8 bar -Quantity: 2 available Price: per piece -Weight: 0.15 kg

Pressure regulating valve, pressure regulating directional control valves -Operating pressure: 0-10 bar -Number: 4 x valves available Price: per piece -Weight: 0.06 kg

round brush -Outer diameter: Ø 200 mm -Reach: 20 mm -Width: approx. 30 mm -Price: per piece -Quantity: 5 available -Minimum order quantity: complete -Weight: 1 kg/piece

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

LEOMAT J 400 – Slitter  Leomat J 400  YEAR 2004  Rewinder: 1  Rewinder: max.800mm  Unwinder max:550mm  Spindle unwind and rewind: 76mm laminator on rail Availability: immediately Sale Reason: Purchase of a new wider Converting machine

Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch unused Ovp -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece

Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters

Pneumatic cylinder holder, bearing block, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: LSN-160 -Weight: 6 kg

Braking resistance, charging resistance, damping resistance, filter resistance -Manufacturer: LENZE -Type: 82R 10% 200 W Article No.: 360112 -Number: 3 resistors available Price: per piece -Weight: 1.3 kg

Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Screed, vibrating screed, concrete trowel -electrically powered -Connection: 230 volts -Working width: 1500 mm -Dimensions: 1500/350/H450 mm -Weight: 17 kg

Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps

Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of L ...

Pulverbeschichtungsanlage für Autofelgen Kann 4 Stück 22"-Felgen in 1 Charge pulverbeschichten Komponenten der Anlage: 1,5x1x1,28m Pulverbeschichtungsofen, 18KW elektrisch VFK-2 einseitige manuelle Pulverbeschichtungskabine Förderstrecke und Ladewagen Manuelle Pulverbeschichtungsanlage Lieferung - 8 Wochen EXW Istanbul Fabrik Inklusive Montage und Schulung Powder coating line for car wheels Able to powder coat 4 pcs of 22" rims in 1 batch Line components: 1,5x1x1,28m powder coating oven, 18KW electrical VFK-2 single sided manual powder coating booth Conveyor track and load trolley Manual powder coating equipment Delivery - 8 weeks EXW Istanbul Factory Assembly and training included

hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg

hydr. Side stroke and fork adjustment 2400 mm fork length 12 t stroke

Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.

Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

Description: Well maintained forklift with inspection, 3rd and 4th valve present, including 1 (steel) gas bottles. Year of construction: 2002 Lifting capacity: 8,000 kg (at 900 mm distance) Inspection until: April 2024 Operating hours: 11,200 hours Mast: plywood (3-piece) with free-lift (2700 mm) Engine: 6 cylinder Perkins (gas) Tires: super elastic (for double) Lifting height: 6,000 mm. Height (retracted): 3,900 mm Fork length: 2,400 mm Dimensions: L x W x H: 3,780 x 2,260 x 3,900 mm (without forks) Request for more photos!

Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece -Dimensions: 75/45/H60 mm -Weight: 0.1 kg/pc.

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Friction feeder: • For inserting brochures/booklets etc. • Speed max. 240 m/min • Product width max. 90 mm • Speed infinitely variable • Code reading Laetus with camera wt880 and bad ejection • HMI touch screen Turret magazine: • 16 stacking slots for product W x L 53 x 100 mm, stacking height 440 mm • Output range stacking height up to 2m/min, single up to max. 200 products/min • Product quality min. 80 g/m² (paper) • Positioning accuracy +/- 1 mm • HMI touch screen • Drive 230V/50Hz

Recon Part Number: CA302180 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Used stainless steel ribbon mixer. Capacity 250 liters. The mixer with a double ribbon agitator.

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg

overhauled Leybold DK200 gate valve pump. Immediately available. 6 months warranty.

Little Run Leybold Scrollvac SC60D Scroll Pump. Immediately available. 3 months warranty.

High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg

Stock number: 3846 Angetribende Tool Manufacturer: Eppinger , Type: 9.654.088 Year of construction: 0 Specifications: VDI-40 Size Winckel 90 Insert Type ER32 External Cooling Speed max 5000 rpm Motor Power Driven Tools 40Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg

Stock number: 3849 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 3, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Lid Maho DMC 64 V linear Year of construction 2003 The MMC was overhauled in October, as well as the rectifier. The spindle motor has been overhauled - The encoder is new as well as the glass scale in X. Location: Bochum

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Stock number: 3851 Angetribende Tool Manufacturer: WTO, Type: 410520135-40 Machine NO.: 5, Specifications: VDI-40 Size Winckel 90 Insert type ER32 - K19-09608-1.1 Internal Cooling Speed max 6000 rpm Motor power driven tools 63 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M

Lennox CAC160DM1M Refrigeration plant Serial: 10090777ES03170615 2017, Four fan system, two compressors and heat exchanger

PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, Simatic PC 612 F control card -Type: PC 612 F B1100-F425 C79458-L9001 -Dimensions: 250/200/H20 mm -Weight: 0.5 kg

Stock number: 3852 Angetribende Tool Manufacturer: Eppinger , Type: 4.200.952 Machine NO.: 7 - 296747-1 Specifications: VDI-40 Size Straight Insert Type ER32 Internal Cooling Motor power driven tools 50 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Brand: Polyglass Type: Washing machine, Vertical Model: LT1500/LC Rood Chassis number: 1090-PL-05/01 Photos/film available: Photos available Remaining: Small machine

Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg

Stock number: 3853 Angetribende Tool Manufacturer: Benz, Type: 114EA04941E6 Machine NO.: 8, Specifications: VDI-40 Size Straight Insert Type ER32 Speed max 4500 rpm Motor power driven tools 50 Nm Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg