l dh 120 used for sale

electric motor, three-phase motor -Engine: is unused -Power: 55 kW -Speed: 2950 rpm -Shaft: Ø 60 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 860/680/H550 mm -Weight: 366 kg

Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Sensor module, G2 flat module -Manufacturer: Lumberg -Type: ASBS 8/LED 5-4 -Number: 3x available -Price: per piece -Weight: 0.26 kg

Servo drive, servo converter, output module, card, input processor, power supply unit, control card, input card, controller -Manufacturer: Lenze -Type: 9114 B -ART.-No.: 331073 -Servo drive -Number: 2x control cards available -Price: per piece -Dimensions: 350/120/H300 mm -Weight: 6 kg

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg

SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine: BF 4 M 2011 C Engine No.: on request Power: 53.3 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: Synchronous with AVR Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 270 Condition: New Year of construction: 2023 Delivery period: Instant Verl  ...

Alfa-Laval evaporator for blast freezer or freezer. Make Alfa-Laval with 3 fans 560mm, 12 mm fin spacing, Type: ILBEH563GD, Hot gas defrosting, New unused.

Gear motor, electric motor -Speed: 35 rpm -Power: 0.75 kW -Construction: B3/5 -Diameter shaft: Ø 40 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 660/235/H280 mm -Weight: 66 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 2011 C Engine No.: in production Power: 53 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2Y1 Gene. No.: in production Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 100 Dimensions of the power unit: Width approx. mm: 1.150 Height approx. mm: 1.647 Length approx. mm: 2 ...

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm -Weight: 62 kg

Stock Number: 3789 CNC LATHE Manufacturer: OKUMA, Type: LVT 300-M - Vertical Machine NO.: 132230, Year of manufacture: 2007 Specifications: Max. swing diameter 280 mm dia. Turning length 200 mm Main engine power 22/15 kw Main spindle speed range 40-4000 rpm C axis - main spindle movement 0.001 degree Tool turret with 12 stations Driven werkzeuumdr. 40-4500 rpm Control OSP 200 Fabr. Operating hours spindle 11485 hours Accessories: Load and Unload device Tool setter Chip conveying. Cooling water system. Length: 2800 mm, Height: 2500 mm, Width: 1500 mm , Weight: 5600 kg

150 litre still with oil firing Operating pressure: 0.6 bar Attachment number: 331 Subject to prior sale - errors possible Ref. No.: D-1170

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

HAISHU CNC550T 4-axis CNC Lathe Producer- Taian HAISHU Machinery Co. Ltd YOM 2015 Condition- Never used Equipped with two spindle and an additional lower turret with 12 tools, providing automatic two-way processing of the workpiece in the achievement of maximum processing speed. Control CNC GSK988TD Additional Y axis Max. working length 750 mm Maximum turning diameter over bed 550 mm Maximum turning diameter pallet 500 mm Spindle type А12 Hydraulic Jaws: 2x 300 mm Front spindle bore taper 1:20 Spindle pass 75 mm Speed of Servo spindled 0-4000 mm/min Axis X/Z/B Quick moves 40 000 mm/min CS1, CS2 power of main motors: 15 kW Engine motor on axle C- 5.5 kW Moment by Axis X/Z: 15 Nm Movement on Y axis: + 55/-55 mm; Moment on axis B: 20 N. m; Time to change tool 1.6 sec Positioning accuracy 0.005 mm Moves on axes X1/X2- 350 mm Moves on axes Z1/Z2- 1100/1350/1850 mm ...

Loipfinger FLM3C cylinder mower for front mounting, 3-fold sports cutter 6-blade, working width approx. 2.10 m, three-point attachment Cat.I (removable) or coupling triangle. With StVZO equipment, turn signals and marker lights. Mowing spindles can be switched forward and reverse.1 Hydraulic connection ew required for spindle excavation, adjustable lowering throttle valve available. Note: Mounted at the rear only for test operation, the mower belongs to the front. Price on request. Further mowing technology in stock. An appointment is required for viewing!

Bead mill Manufacturer: Netzsch Type: LMK-4 Item no.: 840490 Year of construction: 2001 Volume: 6 l Operating pressure max.: 10 bar Operating temperature: max. 50 °C Engine power: 15 kW with operating instructions with various spare parts (grinding chamber, GLD, etc.) with control cabinet and control system Mill & control panel in EEx protection Ceramic grinding chamber with pressure gauge, temperature monitoring, barrier pressure station Machine in excellent condition LWH: 1200 x 600 x 1550 mm LWH control panel: 600 x 600 x 1750 mm

Edur multi-stage centrifugal pump, 15 cbm p.h., 7.5 bar, LBU404C120L Flow rate: 15 cbm/h Head/pressure: 75 m / 7.5 bar RPM: 2,900 KW / voltage: 4.4 / 400 V, motor 7.5 KW Suction side / discharge side: DN 65 flange 180 mm (flange with milk thread connection DN 65) / DN 40 flange 150 mm Type: Stationary, pump head in stainless steel, for liquids, Bauj. 2006 L 780 mm, W 290 mm, H 350 mm Type: LBU404C120L Manuf.: Edur-Pumpenfabrik Product number: 2023002

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Technical data for the shelf connector: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Shelf connector, used for shelf spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material color: sendzimir galvanized Borehole diameter: 11 mm Weight: 0,330 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Low and Duff 6T Chocolate kettle 6000Kgs chocolate kettle, hot water jacket, top mounted motor with agitation and scrape surface, viewing hatch on top, side bottom discharge, with pump for discharging chocolate, 3Ph

IBC stainless steel container transport container electrically heated 1,000 ltr. Content: 1.000 Ltr. Working pressure: max. vapour pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded-on construction for use by forklift or pallet truck, Insulating sheath with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Outlet with butterfly valve DN 80 reduced to DN 50, lid DN 400, 1 x safety valve, 1 x Kamlock coupling 1", Total weight 381 kg final use: Food Height: approx. 1,670 mm Width/length: approx. 1,200 mm/1,100 mm

Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg

Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg

MIG/MAG hose package, -Hose package: for robots, welding device -Length: 3 m -Euro plug -Water cooled -Weight: 3.7 kg -Price: per piece -Number: 1x available -Weight: 4 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1375 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4x available -Dimensions: 210/122/H190 mm -Weight: 4.25 kg

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Three-phase motor, electric motor -Power: 1.5kw -Speed: 940 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 400/270/H220 mm -Weight: 24kg

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

used, complete handover or as a spare parts dispenser