137,966 used machines on RESALE, but how to find them? Machine Search
Type 1B/1K-M length of workpiece. 5000 mm workpiece width. 300 mm Quontity of mortising: 180 mm working height 1/Max 20mm Number of motors 2/380 V 50Hz Air pressure 6 bar Made in Italy 2007y Transport dimensions 4200x2000x2400mm Weight 2000 kg Price 7500 Eur (EXW Jonava, Lithuania)
Gear motor, electric motor, electric gear motor -Speed: 2800/75 rpm -Power: 0.07 kW -Construction: B3 -Diameter shaft: 12 mm -Price: per piece -Number: 5x available -Dimensions: 250/160/H120 mm -Weight: 4.8 kg
Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg
Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg
Centrifugal pump, water pump, immersion pump -Delivery rate: 2 l/min -Motor power: 0.18 kW -Connection: 220-290/380-500 V -Speed: 2700 rpm -Tropicalized: IP 44 -Dimensions: 190/131/H247 mm -Weight: 5.4 kg
Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal. ...
Stick electrodes 2.5 x 250 -Type: Phoenix 330.1 SH Purple R -Weight per package: 3.3 kg
Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked
Key data: 1100 , 2 , 160
TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...
Metal diesel tank - approx. 500 litres capacity - with frame and hand pump - can be driven under by forklift - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 850,- € + 19 % VAT = 1.011,50 € - An invoice with VAT is issued - Payment: Prepayment - - - - - Other: - Sale of used machinery in actual condition to traders without warranty
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: max. 450 mm -Load capacity: 1,000 kg -Number: 2x available -Price: per piece -Weight: 8 kg
Key data: 1350 , 3 , 160
Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines
Key data: 950 , 1 , 160
Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front
Key data: 1100 , 1 , 160
TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING
Key data: 1350 , 2 , 160
Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging
2 roller banding machine Hunkler LAM 600; good condition; cleaned and tested; Working width 600mm; Linen pool height adjustable; suitable for cold glue. Two rollers gluing machine Hunkeler LAM 600; good condition; cleaned and checked; working widht 600mm; glue reservoir adjustable in hight; used for cold glue.
High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg
First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition
Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm
Still CX-T order pickers Tractors Pallet trucks Forklifts Drive type: Electric Model: CX-T + 3 x CSP Type: Tugboat + 3 x trailer CSP Load capacity: 4000kg Technical condition: very good Optical condition: very good Height: 1,400 mm Battery: YOC 2016 Net weight: 1,060 kg. Total weight approx. 3000kg If you have any questions or wish to visit please contact us at Tel.017621834834
Alfa Laval BRPX 313 SFD-34C Tools control panel
Plummer Block Housings, Plummer Block Housings -Hole center height: 70/Ø 16 mm -Base plate: 235 x 147 mm -Dimensions: 235/147/H approx. 100 mm -Weight: 4.3 kg
Stacking electrode 2.5 x 350 -Type: SL 19 G -Weight per package: 2.7 kg
Stack electrode 4.0 x 350 -Type: 330.1 SH Purple R -Weight: 4.8 kg
Stick electrodes 2.5 x 350 -Type: Gricon 8 A Price: per package -Number: 3 packages available -Weight per package: 4.6 kg
Depositor Belmixing-Bowl-Lift 600 - Exhibition machine, year of construction 2022, brand new condition - Depositing range 50 - 600 ml Capacity up to 30 doses per minute Depositing range and output infinitely adjustable Machine mobile, with two locks Machine completely stainless steel Machine height pneumatically adjustable Piston rod with plastic butterfly valve for semi-liquid and flowable products with particles up to D = 25 mm Direct dosing from bowls or other containers Turn-over system for easy removal of bowls Pneumatic hand gun with hose L = 1,650 mm Vertical nozzle D = 25 mm Other accessories on request
TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support
Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc
1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!
Hydraulic pump, oil pump, gear pump -Power: 1.5 kW 1400 rpm -Dimensions: 540/320/H320 mm -Weight: 48kg
Stick electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96: E8018-B2-H4 -Price: per package -Number: 10 packages available -Weight per package: 1.6 kg
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 2805 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Protection class: Ex -Dimensions: 270/155/H225 mm -Weight: 9 kg
Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg
Three-phase motor, electric motor -Power: 0.75/2.5 kW -Speed: 1430/2860 rpm -Shaft: Ø 25 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 390/195/H250 mm -Weight: 19.35 kg
Skin pass machine Biscuit machine Krumbein DSM 600 LIV - Skin pass machine Dropin - 600cm bandwidth - Year of construction 2005 - mobile on wheels
Three-phase motor, electric motor -Power: 1.35 kW -Speed: 1410 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 380/205/H260 mm -Weight: 22 kg
2.4 kg batch like new, only 4 x run, airflow, drum speed adjustable, Artisan cropster connection
Number of floors: . 0 Width of floors: . mm Depth of floors: . mm 1400x650x1000 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stick electrodes, welding electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96:E8018-B2-H4 -Price: per package -Number: 5 packages available -Weight per package: 4.8 kg
Fully automatic packaging machine for gluing and closing three flap pre – formed, top loaded cartons after filling.
Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm -Weight: 2.7 kg
used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg
Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.
Vacuum cleaner motor, suction turbine, wet vacuum cleaner -Manufacturer: Lamb Electric, suction motor from Gansow scrubber-dryer -Voltage: 24 V -Quantity: 29x available -Price: per piece -Dimensions: Ø 145/H175 mm -Weight: 2.3 kg/pc.
Three-phase motor, electric motor -Power: 30 kW -Speed: 2945 rpm -Protection class: IP 55 -Construction: B5 -Shaft: Ø 55 mm -Number: 1x available (1x without fan cover and fan disc) -Price: per piece -Dimensions: 760/400/H500 mm -Weight: 237 kg
Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG -Type: LS 8/L14 TKS -Application: DC operated -Quantity: 1 piece available -Price: per piece -Weight: 0.5 kg
maximum number of results exceeded
please refine your search
