l dh 120 used for sale

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

General SKU207S950 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10071327 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU207S949 LocationBarneveld MakeJulabo TypeFC-1200S Pressure Working pressure1.2 Bar Main Features Heating (medium)Electric Capacity1.2 KW Temp.80 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Electric heatingcheck Heating capacity-15/80 °C Electric capacity1,2 kW With coolingcheck Capacity0,26 - 1,2 kW (Ethanol) Temperature-10/20 °C (Ethanol) Tank capacity8 - 11 Ltr. With pumpcheck (Immersion Pump) Capacity22 Ltr./min Information Mach.No.10070753 Floorspace0,5x0,6 m CEcheck Total height0,5 m Weight70 kgTemperature control unitsJulaboHeat exchangers > Temperature control unitsBrand > Julabo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnevel ...

General SKU349T951 LocationBarneveld No.61.006 Year of construction1984 Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Double cone tumbler mixercheck Capacity2000 Ltr. (± 1300 Ltr. net) Inlet50 mm (conus inlet dia. 100mm) With motor5,5 kW 220-242/380-420 Volt With brake motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck(as is) Floorspace2x2,5 m CEcheck Total height4,05 m Weight3500 kg Extra Specificationsis supplied with control components (as is) Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...

General SKU040G127 LocationBarneveld MakeDe Dietrich TypeRFS-1200 No.54913 Year of construction1984 Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1300 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1300 Ltr Vessel sizesdia. 1200x1400mm Dished topcheck Dished bottomcheck With cover/man hole dia. 500mm Outletdia. 100mm Max. temperature-10/+200 Degr. C. Information Floorspace1,4x1,4 M Total height2,4 MPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU369X883 LocationBarneveld MakeBusch Mink TypeMV 1202 A ZZ1 Mach.No.D15120031 Pressure Working pressure0.2 Bar Main Features MaterialMild steel/Stainless steel Volume950000 Ltr. Motor12.5 KW Specified Features - Vacuum pump MaterialMild steel, Stainless steel Pumpcheck Number of pumps:1 Capacity950 m3/h With motor7,5 kW, 400 volt, 2920 rpm / 12,5 kW, 400 volt, 2945 rpm With frequency invertercheck InletDN100 OutletDN50 Information Year of construction2015 Mounted on framecheck With switchgearcheck Total height1,65 m CEcheck Floorspace1,62x0,80 m Weight750 kgVacuum pumpsBuschPumps > Vacuum pumpsBrand > Busch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

General SKU388X976 LocationBarneveld MakeFidi GmbH TypeD120 WTX-U2 No.31622 Year of construction2005 Technical specs Max. temperature200 °C Main Features Capacity4 Ltr./Hr. Specified Features - Distillation Distillation installationcheck Capacity180 dm3, (120 dm3) Vessel sizesDia. 500 mm Number of columns:1 Motor9,5 kW, 400 volt, (Ex) With condensercheck With receiving flaskcheck With pumpcheck MaterialHalar coating Information Mounted on framecheck With switchcheck Weight335 kg CEcheck Floorspace1,94x1,03 m Total height2,18 mDistillationFIDI GmbHColumns > DistillationBrand > FIDI GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

used confectionery oven Miwe Condo CO 4.1208, overhauled, 4 floors, with hood, steam condenser and cooking chamber, shelves 120 x 80 cm, electric, 4 solenoid valves renewed, 4 servo motors renewed, water pot renewed, steam cleaned, Ser. no. 703 774, 33.8 kW, 400/230 V, 50 Hz

Tumbler screening machine, used Type : MTS 1200 / 4 Manufacturer : MINOX Siebtechnik GmbH 4 Deck Machine, Diameter per sieve : 1200 mm; Drive : 4 KW; --> machine checked on delivery and ready to run, top condition!

ID3680 Haarup Mixodatamat 1200/2000 year/Year of construction 1993 Slab press for 50mm slabs with backing concrete, with mixer, portioning, press, including steel pallets for picking the pressed slabs. Slab press for 50 slabs with back concrete, with mixer, portioning, press, incl. steel pallets for picking the pressed slabs

The machine is in good technical condition, testing is possible by prior arrangement. control system: SINUMERIK 828D Movement in X/Y/Z axes: 1200 / 600 / 500 mm Distance between table and spindle end: 100 - 600 mm Number of axes: 3 Rapid traverse in X/Y/Z axes: 30 m/min Working feeds X/Y/Z: 0 - 15 m/min Clamping area: 1300 x 630 mm Maximum table load: 1500 kg Tool change Number of tool stations: 30 Maximum tool diameter: 80 mm Milling spindle Maximum speed: Mechanical spindle 10,000 rpm, motor spindle 15,000 rpm Maximum torque: mechanical spindle (S6) 100 Nm, motor spindle (S6) 100 Nm Dimensions (length x height x width): 3370 x 2950 x 3000 mm Machine weight: 12000 kg

Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 scope of delivery: without supports and side guides For individual, professional advice, simply get in to ...

x-travel: 1.200 mm y-travel: 600 mm z-travel: 675 mm Control: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm : 40 fach Distance between table and spindle: 735 mm turning speeds: 10.000 U/min spindle drive: 18 kW Internal cooling system: 30 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hoshizaki HNC-120AE-L Sushi Display Case 120 cm Product Description The beautifully designed display cases keep the temperature and humidity at a constant level, unlike air circulation systems that dry out the sushi on display. As a result, the sushi stays fresh longer and the quality is visible at the highest level. The Hoshizaki display cases do not thaw so that no condensation drips onto the sushi on display. This always prevents contamination of the products. The included display grilles can be turned upside down to increase cooling performance. Manufacturer: Hoshizaki Model No.: HNC-120AE-L Sushi display case Width: 1200 mm Height: 280 mm Voltage: 220-240 Watts: 150 RRP 2900,-€ You can find more chest freezers in other sizes - new and used - in our shop! International shipping costs on request!

: 15000 kg height: 790 - 1150 mm width: 1200 mm : ja : 790 - 1150 mm : 120 x 1200 mm Support trestle, assembly trestle, steel trestle, welding table, assembly table, steel trestle, work trestle - Our support trestles are characterized by their stable construction, high load-bearing stability, and indestructible service life. - Trestle support made of screen printing - Powder-coated in RAL 5010 gentian blue - CE marking - Transport on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1200 mm weight: 350 kg dimensions: 1200 x 1500 x 750 mm Bucket width approx. 1200 mm Bucket depth approx. 1500 mm Bucket height approx. 750 mm Entry pockets 70 mm x 180 mm Weight approx. 350 kg Capacity approx. 900 liters Made in Germany, powder-coated The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.

Fette P 1200 IC rotary tablet press with changeable turrets EU19/BB (30 stations, max. tablet diameter 13 mm, max. filling depth 18 mm, capacity up to 216,000 tablets/hr.), EU1/D (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets/hr.) and EU1-441 (20 stations, max. tablet diameter 25 mm, max. filling depth 18 mm, capacity up to 120,000 tablets./hr.)

Dimensions (L/W/H): 6300x2000x2350 mm Weight: 1250 kg Total power requirement: 32,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2700x900x1900 mm Weight: 800 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1450x2700x1450 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wall-mounted refrigerated cabinet, convection cooling Used device built in 2015 with 2 doors with 4 shelves 120 x 75cm Temperature range approx. +2 to +8°C, ready to plug in Digital temperature display Automatic defrost Automatic condensation Consumption: 4.7KW/24h External dimensions approx. 140 x 75 H 207cm LED lighting

CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

travel -x axis: 1.200 mm travel -y axis: 900 mm travel -z axis: 500 mm control: HEIDENHAIN tool taper: SK 40 milling spindle dia. in forward position: 70 mm table surface area: 1.400 x 900 mm Milling machining centers - vertical | HERMLE - C 1200 V equipped with tool changer. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C1200 V | C-1200 V | C 1200-V | C1200V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films

Deck Oven Miwe Condo CO 4.1208 - Manufacturer: Miwe - Model: Condo CO 4.1208 - 3 shelves each 120x80cm - each shelf for 2 trays 60x80cm long next to each other or 4 trays 60x40cm - Each floor with separate control panel display - Top and bottom heat can be adjusted separately - Each floor with separate steam box - With restart function - With ECO function -each floor individually 9.45 kW together 37.8kW Entire furnace with proofer 39.7 kW - with proofer Proofer 1.9kW - With exhaust hood - Can be moved on castors - Year of construction 2004

Technical data see Pictures attached

Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul

General SKU423W1341 MakeAllgaier LocationBarneveld CEcheck TypeVTS 1200/2 Main Features MaterialStainless steel Surface1.1 m2 Sizes diameter1200 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface1,1m² Number of sieve decks:2 Sieve sizesDia. 1200 mm With covercheck InletDia. 300 mm OutletDia. 350 mm, dia. 150/200 mm Drive excentercheck Motorcheck( type plate missing) With extra sieve deckscheck MaterialStainless steel 1.4552 Information No.406 Year of construction1993 Mounted on mild steel framecheck Floor space1,60x1,60 m Total height1,40 m Extra Specificationsinfo regarding extra sieves: in total 18x extra sieve decks. sizes 2.38mm-1.12mm-1.0mm-0.9mm-0.71mm-0.60mm Vibro sievesAllgaierSieves > Vibro sievesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ship ...

This 3-axis HERMLE C 1200 V vertical machining centre was manufactured in 2003. It features a robust clamping table measuring 1400 x 900 mm and a high-performance milling spindle with a maximum power of 10 kW, torque up to 87 Nm, and speeds up to 16,000 RPM. Ideal for complex machining tasks, the HERMLE C 1200 V machine we have for sale offers precision and durability. Contact us for more information.

This 5-axis OMV BPF-4 1200 universal machining centre was manufactured in 1999. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this OMV BPF-4 1200 universal machining centre. Contact us for more information.

- Vario matic Rotation / Angle - Remote control with Dro - Very littles used - incl. 2000 mm false chuck  - CE-Marked 

table length: 1200 mm table width: 1200 mm table height: 150 mm bore: 22 mm weight: 395 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€.

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

Aircooled chiller CARRIER 30RBS 120B0273 PE 117 KW Cooling capacity: 117 kW / 33.27 tons (12/7 — 35°C) Year of manufacture: 2016 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Copeland ZP182KQE-TFD-604 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. + 1 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump GRUNDFOS AC 30-142 Dimensions: 2.11x2.26x1.33 m. Weight: 830 kg. Condition: Good

Code: 0599 Brand: KUPER Model: FW 1200 Thread splicer for veneer Reach mm 1200 Veneer thickness from 0,3 mm to 3 mm Feed speed from 10 to 50 mt/min Worktop height mm 925 Electrical connection 1,5 Kw Overall dimensions: mm 2150 x 750 x 1650 h Weight kg 425

A hot beverage filling and capping machine MBF is available. Filling stations: 35, capping heads: 4, bottle type: VdF, bottle volume: 1000ml/500ml, max. filling temperature: 95°C, screw cap: MCA aluminum standard, cap dimensions X/Y: 28mm/15mm, filling capacity: 7000bottles/h, bottle height (1l): 306.5mm, machine dimensions X/Y/Z: approx. 3400mm/2300mm/2600mm. Documentation available. On-site inspection is possible.

Welding Fume Filter, Tebaron, TE 1200 – used - : Prices from location: 650.-€ (net) Manufacturer: ISI Industrie-Produkte GmbH Type: TE 1200 Year of Make: 1991 380V, 1.1kW, 2.6A, IP54 Rating: good Available: immediately Location: Waltrop

For sale is a Dimension SST 1200 3D printer from Stratasys. Details: Technology: FDM Max. print size: 254 x 254 x 305 mm Supported Material: ABS Nozzle is clogged and needs to be cleaned! some filament spools and platforms are included The printer is in a used but well-preserved condition, after cleaning the nozzle and drying the material, the printer is ready for use again.

Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.

General SKU335W848 MakeHoesch + Soehne Type40.1206 SVM No.MFP-F410 Year of construction20check/ 2014 LocationBarneveld Dimensions Cake capacity1904 Pressure Working pressure6 Bar Main Features MaterialPolypropylene Pressure6 Bar Surface87.8 m2 Specified Features - Filterpress Filter presscheck Filter surface87,8 m² Recessed chamber platescheck Number of platens41 ( total plates 106) Internal platen sizes1082x1082 mm External platen sizes1200x1200 mm Platen thickness86 mm Frame thickness9 mm With membranes on platenscheck Cake capacity1904 l Central inletcheck With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor5,5 kW, 400/690 volt, 1450 rpm, (Ex) Automatic openingcheck plate shifting system MaterialMild steel, Polypropylene Information Floorspace6.60x2,0 m Total height1,90 m Weight13000 kg CEcheck ATEX compatiblecheck  ...

Key data: 12000 , 11690 , 155

Injection molding machine SANDRETTO MEGA TES 1200 - 8 series Type: 17750-1200 Clamping force: 1200 T Screw diameter: 155 mm Injectable volume: 11,698 cm3 Injection pressure: 1520 bar L/D Ratio: 20 Column spacing: 1404 X 1404 mm Closing stroke: 1350mm Heating Zone: 6 Oil tank: 1900 liters Min/max mold thickness: 450-1600 mm Dimensions: 15.86 x 3.18 x 3.16 m Weight: 94 T

CNC vertical machining center Type: Emcomill E 1200 Manufacturer: Emco Year: 2014 Control: Siemens Sinumerik 828 D 4th axis included X: 1200 mm Y: 600 mm Z: 500 mm Table: 1300 x 570 mm Max table load: 1500 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 30 positions Chip conveyor Dimensions: 3200 × 3350 × 3060 mm Machine weight: 12000 kg In good condition, under power Find more here - / Contact us at -

Key data: 7000 , 6785 , 120

Presse à injecter NEGRI BOSSI 700 T Vector Type : V700-12000 Commande : DIMI EL II Force de verrouillage : 700 T Diamètre vis : 120 mm Volume injectable : 6785 cm3 Pression d’injection : 1620 bars Course d’ouverture : 1000 mm Dimensions des plateaux : 1410 x 1310 mm Distance entre colonnes : 1000 x 900 mm Epaisseur moule min/max : 400 - 1000 mm Vis d’injection bi métal 2 noyaux hydrauliques Interface robot Dimensions : 11 x 2,34 x 2,40 m

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power

General SKU393X1064 LocationBarneveld CEcheck Main Features MaterialStainless steel Feeder Width200 mm Specified Features - Continuous dryer Continuous dryercheck Outlet height800 mm Motor7,5 kW, 400 V Maximum allowable temperature220 °C MaterialStainless steel 1.4306 (304L) Information TypeSpiramix 1200 Year of construction2006 With switchgearcheck (as is) Floorspace4,655 x 1,50 m Total height3,52 m Extra SpecificationsScrew diameter: 500 mm: screw length: 2460 mm: speed: 7.14 to 102 rpm: angle: 0 to 45°. The screw is electrically heated. With an electric heating unit, 55 kV. Continuous dryersNew arrivalsSpiramixDryers > Continuous dryersNew arrivalsBrand > Spiramix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...

General SKU245P316 MakeWerner + Pfleiderer (DE) Type175/120 No.231457 Year of construction1994 LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Specified Features - Sieve granulator Granulating sievecheck Gratercheck Sieve sizesdia.130mm x180mm Sieve perforationdia.2mm With hopperDia.500mm, h=300mm Inletdia.130mm Outlet200x120mm Motor1,5 kW, 220/380 Volt (Ex) With extra sieves(4x)dia.5mm, dia.2mm, dia.1mm MaterialStainless steel 1.4571 (316Ti) Information Mounted on mild steel framecheck Mounted on wheelscheck With switchcheck Floor space0,7x0,6 M Total height1,5 M Weight160 KG ATEX compatiblecheck Extra Specifications : : : : : : : : : : : : Sieve granulatorsWerner & PfleidererSieves > Sieve granulatorsBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared  ...