l dh 120 used for sale

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs

Workbench, work table, assembly bench -Workbench: with drawer, massive execution -Width: 1200mm -Depth: 600mm -Height: 790mm -Closet door: lockable / without lock -Weight: 40 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor roller: transport roller with bearing block -Diameter roll: 108 mm -Transport width: 1200 mm -Total dimensions: 1365/161/H110 mm -Weight: 19 kg

Year of construction : 1995 Specifications: Cutting capacity 37 kG/ mm" 5 mm Cutting capacity 70 kG/mm" 3 mm Cutting speed 35 m/min Blank diameter 180 – 1200 / 1600 mm

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 1200 mm -Piston rod: Ø 85 mm -Operating pressure: 200 bar -Pressure load: max. 10 t -Quantity: 2x cylinders available -Price: per piece -Dimensions: Ø 118 x 1860 mm -Weight: 118 kg/pc.

Roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: not powered, length 3.6 m -Roll width: 1200 mm -Roller diameter: 83 mm -Roller spacing: 200 mm -Dimensions: 3600/1220/H265 mm -Weight: 206 kg

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200 RA2230 Merging of two belts into one Technical data: Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motor Belt width (GuB): 1200 mm Overall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the top Scraper height: 190 mm (without motor) Belt width/height scraper: 180 mm Support feet: optionally available Conveyor speed (v m/s): 1 Drive: SEW geared motor, R17 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length ...

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: Hot-dip galvanized -Quantity: 1x grids available -Weight: 13 kg

Transport trolleys, platform trolleys, transport trolleys, table trolleys, assembly trolleys -Manufacturer: Krieg, table trolley with 4 shelves -Load capacity: kg -Chassis: 4 swivel castors -Dimensions: 1200/700/H1210 mm -Weight: 62 kg

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

Key data: 1200 mm, 600 mm, 670 mm

Machine Details Stock-No. 1105-03992 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1200 Year of manufacture 2005 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Switzerland Delivery time immediately Freight base ex stock HAGUENAU FRANCE Technical details x-travel 1200 mm y-travel 600 mm Z-Travel 670 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 650 mm table-size 1220 X 620 mm max. table load 1500 kg spindle taper ISO 40 spindle turning speed range 10000 rpm feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 8 t dimensions of the machine approx. 3.250 X 3.240 X2.8 m Additional information - electrical hand wheel - Chip conveyor  ...

clamping rail, guide rail, support rail, stop rail -Mounting rail: with T-slot -Length: 1200 mm -Groove width: 15 mm, dimensions see photo technical drawing -Dimensions: 1200/80/H30 mm -Weight: 18.4 kg

Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

used parts and components available from stock for Sabo 1203; 1500 (also new parts!); 1502D; RS84 Senior Ransomes 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbitels, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., , Shibaura SP1840; CM364, Toro Pro81 etc. ... complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO, self-propelled Ransomes MK IV... Info and offers on request. No sending of package deals or lists.

Diosna SP 120D Spiral Kneader -Spiral mixer Diosna SP120D -Type: SP 120 D -Wear parts renewed -Watches new -Machine completely repainted -mobile with brake -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters

Many of our machines are available from stock. Call and ask to find out more. Hydraulic press brake PBE-1204-CNC STEP ROCK22+ Specifications - Max working thickness (S235): up to 3.0 mm - Nominal pressure: 400 kN - Max working length 1250 mm - Throat depth: 300 mm - Max stroke: 210 mm - Daylight: 410 mm - Distance between side frames: 2600 mm - Max backgauge distance: 750 mm - Nominal motor power: 2.0 kW - Length: 1960 mm - Width: 1450 mm - Height: 2610 mm - Weight: 4000.0 kg Tools - Automatic backgauges on linear guides driven by servo: 2 pcs - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinu ...

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, control unit -Manufacturer: Robosoft, Control Rack -Type: 411-1206 -Fuse block: 412-2240 -Circuit board: 413-0800 -Individual components: see photos -Price/Sale: complete -Dimensions: 500/195/H145 mm -Weight: 3.6 kg

LISTING ID: 22741 BRAND: MASSON MODEL: ZFW (MM) 12000 C RATIO: 1:2,747 POWER: 1369 kW (1835 bhp) 1800 rpm WEIGHT: 2530 DIMENSIONS: 110 x 148 x 143 (h)(cm) HS CODE: 84836080

Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...

self-aligning ball bearing -Bore: Ø 45 mm -Outer diameter: 85 mm -Width: 19 mm

Complete Sterile Tank Unit with PLC and Aseptic Valve Cluster High-quality sterile tank unit designed for hygienic storage and handling of liquid food products such as milk, juice, and similar beverages. The system includes a fully automatic aseptic valve cluster with PLC control and HMI, ensuring reliable operation and integration into modern aseptic processing lines. Main Tank Specifications - Tank Product Capacity: 12,740 liters (12.74 m³) - Working Capacity: 10,850 liters (10.85 m³) - Water Capacity: 662 liters - Maximum Pressure: 3.5 bar - Minimum Pressure: -1.0 bar - Test Pressure: 5.8 bar - Maximum Temperature: 145 °C Technical Data Materials - Product contact parts: 1.4404 stainless steel - Cooling jacket and legs: 1.4301 stainless steel Design Parameters - Design Pressure: +3.5 bar ÷ -1 bar - Design Temperature: 145 °C - Total Capacity: 12.74 m³  ...

Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs

table length: 1200 mm table width: 800 mm table height: 800-975 mm table load capacity: 250 Kg weight of the machine ca.: 150 Kg dimensions: 1,2 x 0,8 x 0,85 m Special price! Siegmund workbench Perforated plate made of high-quality steel S355J2+N + plasma nitriding - 16 mm bore - Surface holes in 50x50 mm grid - Material thickness approx. 12 mm - Height-adjustable feet for working height in the range of 800 to 975 mm - Frame made of aluminum profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used All-Purpose Oven Stone Slabs Oven Electric by Miwe Model Condo CO 4.1208 from 2018 tested and cleaned in stock immediately available for sale. The stove is with 4 floors each 120x80cm with exhaust hood including fan. - 4 shelves each 120x80cm - Each floor can be controlled separately - Top and bottom heat can be controlled separately - With exhaust hood - Floor entrance height 3 pieces 17cm and one shelf 20cm - Connected load: 28.7 kW - Year of construction 2018 Dimensions Width: 150cm Depth without hood: 133cm, with hood 173cm Height without hood: 194cm, with hood 213cm

Key data: 1 mm, 650 mm, 530 mm

Control: Heidenhain iTNC530 Travel: X-axis 1,200 mm Y-axis 650 mm Z-axis 520 mm Fixed machine table: X-axis: 570 mm Y-axis: 650 mm Z-axis: 520 mm Number of grooves 7 (â' 14 mm width) Feed X-/Y-/Z: 0 – 45 m/min Clamping area: 760 x 600 mm Swivel table: Clamping surface: Ø 520 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 50 - 12,000 rpm Accessories: - Kinematics Opt - Handheld operator - Screen filter system KM500 - IKZ 25 bar -Conveyor - Blow-off gun - Rinsing gun - M&H workpiece pushbuttons - M&H desktop radio switch

Throughput depends on material type, speed, and cutting set Capacity: up to 1.500 kg/h Electric power: 7.5 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 60 Length: 100 Height: 120

Throughput depends on material type, speed, and cutting set Capacity: up to 2.000 kg/h Electric power: 7,5 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 55 Length: 95 Height: 105

All stainless steel Hopper capacity: 1200 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 11 KW Installation dimensions of machines in cm: Width: 162 Length: 224 Height: 191

length: . mm height: . mm volt: U2 100 V ampere: I2 40-120 A volt: U1 380 V volt: U0 280 V ampere: I1 37-48 A Manufacturer number.17763 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optical separator, Brand: Ecorema, Model: Aisorter X-1200, Year: 2020, Power: 4500 W

Peso máximo de pila + pallet: 1200 kg Formato máximo del papel: 1200 x 900 mm Formato mínimo de papel: 560 x 360 mm Ancho de apertura mínima: 840 mm Ancho de apertura máxima: 1600 mm Potencia: 9,5 kW Alimentación: 380V trifásico 50 Hz Peso: 3400 kg Dimensiones: 2700x2200x2200 mm Nivel de ruido: < 80db

Height 1800 mm Width 1450 mm Length 1450 mm Power supply: 400V 50Hz 3N Total power 6 kW Main Material Stainless steel, acid-resistant Sieve hole diameter 2 mm Comes with a drum with 5mm holes

Distance between points: 1100 mm, Center height: 175 mm, Maximum diameter to be rectified: 270 mm, Maximum piece weight: 135 Kg, Working wheel dimensions (od x id x width): Ø508xØ304.8x80 mm, Main engine power: 7.5 Kw, numerical control: Fanuc 21 Oi-T

Key data: 6000 mm, 2000 mm

Ram travel (W) 1,200 mm Taper ISO 50 P.D.B. RPM 10 - 4,000 kW 22 Volts 400 A.T.C. 40 positions

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

x-travel: 850 mm y-travel: 630 mm z-travel: 500 mm Control: Heidenhain : total power requirement: 16 kW dimensions of the machine ca.: 5 x 4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-P 12001.20 Year of Make: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Donaldson Torit DCE filter system

Zusammentragmaschine Serial-No. 35705 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

screw ø:: 120 mm screw length:: -- screw speedl:: -- U/min drive power:: 36 kW Condition: used - Specification: Single screw TPE extruder type 120 - second-hand - Screw diameter: 120 mm - Dimensions length approx.: 3.000 mm Width approx.: 1,700 mm Height approx.: 1,900 mm - Output approx.: 215 kg/h - Motor power: 36 kW - Weight approx.: 2,300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doka Framax Element 120 x 240 Uni The frames and the formlining are in good condition and can be used immediately. The high-performance steel frame formwork for large-scale formwork with the crane. Large element for fast formwork Easy to clean thanks to powder-coated frames Doka Framax steel panel 120 x 240 Uni Frames and formlining are in good condition and can be used immediately. The high-performance steel framed formwork for large-area forming by crane. Large element for fast forming Easy cleaning due to powder-coated frames

Transnorm roller curve combination right and left 45°-1200-900-800 IR800 1551 mm RA2232 Make: Transnorm Running direction: Curve combination clockwise/anticlockwise Roller width (RB): 800 mm conical, plastic coating Nominal/outer width (NB): 900 mm Inner radius (IR): 800 mm Center section length: 1200 mm Offset: 1551 mm Frame height: 80 mm Overall height including motor: 450 mm Drive/transmission: Chain Electrical data: 300-500 V, 0.37 kW Gear motor: SEW, R17DT71D4/TH Conveying speed: please contact us Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Nomina ...

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

Bottle washing machine PAC type: CB 12-0,5 R-6 CB year of manufacturing: 1995 capacity: approx. 6.000 bph control range: 3.000 - 6.300 bph bottle type: 0,5 ltr, Euro, NRW bottles bottles per row: 12 bottles inside the machine: 1.080 bottle carriers: 96 dimensions: length: 6.110 mm width: 1.545 mm height: 2.175 mm (without feet) weight: approx. 5.800 kg water consumption: 3,6 m³/h heat consumption 80°C: 480 kJ/h x 1000 electric consumption: 11 kW

Transnorm Belt conveyor 3200-500-400 RA2335 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1995 Condition: good (used) Motor: fully functional conveyor length (FL): 3200 mm nominal / external width (NB): 500 mm belt width (GB): 400 mm overall height (BH): 65 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 0.175 m/s, Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1995 condition: good (used) Conveying length in mm: 3200 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 Conveyor speed m / s: 0,175 scope of delivery: without supports and side ...