l dh 120 used for sale

: neu : ca. 4 Monate ab Auftragse : Türkei : 59700 € : 1128.33 € : 100 to : 300 mm : 680x420 mm : 1100x600 mm : 500 mm : 17.5 mm/s : 5,5 mm/s : 37 mm/s : 7.5 kW : 1850 mm : 1400 mm : 2650 mm : 5400 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55600 € : 1050.84 € : 30 to : 200 mm : 500?800 mm : 600x1000 mm : 450 mm : 100 mm/s : 18 mm/s : 165 mm/s : 11 kW : 1950 mm : 1750 mm : 2650 mm : 4700 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

1 Piece Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Make: 1988 Capacity: approx. 55 m³/h hardened concrete at 30 seconds mixing time Aggregate storage 4-chamber in-line silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 incl. humidity probe / moisture measurement Dosing / Weighing Aggregates via weighing belt: max. 2,500 kg Cement scale: 250 kg Spirit level: 250 liters Cement silos 3 × 60 t – Manufacturer: Kurz 1 × 60 t – manufacturer unknown Control Gedis Operator's position control container Additional equipment Partial enclosure included Additive container included Immediately available Location: Ludwigslust / Northern Germany Offer is net ex location Subject to prior sale Errors and/or misrepresentations excepted Sale as seen, without guarantee and/or warranty Duplication, reuse, publi ...

Overview This SMI LSK 45 T shrink wrapping machine, manufactured in 2002, is designed for the packaging of beverage multipacks using shrink film. The machine was previously used for producing various sixpack configurations and is suitable for different bottle sizes, offering flexibility in multipack formats. With a capacity of up to 45 packs per minute, the machine is well suited for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production and space constraints, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical Data Manufacturer: SMI Model: LSK 45 T Machine type: Shrink wrapping machine (film packer) Year of manufacture: 2002 Capacity: approx. 45 packs per minute Packaging type: Shrink film (with film discharge) Application: Packaging of beverage multipacks Formats: 2x3 x 0.5 L 2x3 x 1.0 L 2x2 x 1.0 L 2 ...

bar material dia.: 32/38 mm spindle passage: 44 mm turning length: 320 mm turning speeds: 200-8000 U/min c-axis: 0,001 Grad gripping station: 32/38 mm turning length: 120 mm turning speeds: 200-8000 U/min c-axis: 0,001 0 number of tools: 13 fix number of milling stations: 4+5 driven control: Mitsubishi Meldas M70 Number of axles: 5+2 St. total power requirement: 7,5 kW weight of the machine ca.: 2850 kg dimensions of the machine ca.: 2,5 x 1,4 x 1,75 + FMB m bar loader: FMB turbo 3-36 fire distinguisher: Kraft & Bauer CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swarf & coolant tank, fire distiguisher. ON/OFF 29.564h (status 24.03.2026) Running hours 26.607h (status 24.03.2026) GBL function (standard) LFV function: no The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Manufacturer: F. and M. Lautenschlaeger Model: Magnocert 12 STE (Type 12417) Year of manufacture: 2015 Includes vacuum pumps Unit 1 - Total cycles: 19160 - Last service: February 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 2 - Total cycles: 20273 - Last service: January 2026 - Test run passed, vacuum test 0.0 mbar/min Unit 3 - Total cycles: 18402 - Last service: January 2026 - Test run passed Find more here - / Contact us at -

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

CNC vertical machining center Type: V-50L Manufacturer: Leadwell Year: 2016 Control: Fanuc X: 1270 mm Y: 635 mm Z: 610 mm Spindle taper: SK40 Table: 1420 x 610 mm Max table load: 1000 kg New spindle in 2025 4-axis GSA with tailstock Internal cooling 20 bar Machine in good condition, fully functional, under power Find more here - / Contact us at -

Roll diameter: 600 mm; Column projection: 580 mm; Cutting depth: 370mm; Swivel table: yes -0 to + 20Â; Table size: 810 x 580 mm; Belt speed: 1660m/min; Motor power: 2.2kw/400V; Engine brake: yes / automatic; Extraction port: 2 x 120mm; Machine length: 1190 mm; Machine width: 800 mm; Machine height: 2063 mm; Weight: 295 kg;

Velati Salami Line existing • Grinder BBTMR 220 • Salt-Band/Spice • Vacuum paddle mash EEC1 • Year 1999

PRESSTATION STV1000 FOR SALE OR FOR RENT! Installation STV 1000 Year of manufacture 2016 Dimensions (length x height x width): 3360 x 1561x 1165 mm Pressing force: 300 kN Inlet opening: 1180 x1405 mm Power: 7.5 kW;

working width: 500 mm; cutter head: Leitz - Centrofix; number of blades: 4; surface table length: 2800 mm; table adjustment: lever; read out table height: scala; sourface fence adjustable: yes; motor power: 5,5 kW; machine length: 2800 mm; machine width : 1000mm; weight: 900 kg;

Band width: 150mm; Band length: 2400mm; Veneer sanding device: no; Oscillation: yes; Roll diameter: mm; Grinding unit swivel: yes / 90Â - 0Â; Work table: 730 x 300 mm; Additional table: 420 x 400 mm; Belt speed : 14 m/sec. m/sec.; Suction port: 120mm; Motor power: 1.8 kW / 400V; Machine length: 1480 mm; Machine width: 680 mm; Weight: 160 kg;

Dowel hole drilling device: no; Drilling depth: 150 mm; Elongated hole length: 180 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever controls.

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 150 mm; Slotted hole length: 250 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 160 kg;

Lippert Belt Conveyor Riser with Arch and Straight GF 6005-650-500 RA2485 Technical data: Conveying length (NL): 6005 mm (ascending conveyor 2420 mm + arch 500 mm + upper straight 3085 mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6005 ( 2420 + 500 + 3085 ) Nominal / outside width in mm: 650 Belt width in mm: 500 Driven ...

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 250 kg; Solid slotted hole drill with a lever operation.

Lippert belt conveyor GF 1715-650-500 RA2484 Technical data: Conveying length (NL): 1715 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2001 Optionally available: Supports Side guides Prices plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 1715 Nominal / outside width in mm: 650 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: freely adjustable scope of delivery: without suppo ...

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 180 mm; Elongated hole length: 240 mm; Height adjustment range: 160 mm; Motor power: 2.2 kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 260 kg; Work table can be rotated by 60 degrees on both sidesSimple operation via one-hand lever for fast and precise workDrill head mounted on double guideClamp stops allow easy and quick adjustment of the drill head runHeight adjustment of the drill head via handwheel with numerical

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.3 / 1.8 kW; Speed: 1400 / 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

For sale or for rent a presstation STV1200 with or without box Technical specifications: Equipment: STV 1200 press station Year of construction: 2009 Dimensions (length x height x width): 3,660 x 1,165 x 1,561 mm Bjbsw S E N Hsqkhkgbeww Pressing force: 320 kN Filling opening: 1,180 x 1,405 mm Pressure piston height: 600 mm Extension piston width: 1,405 mm Pressure clamping depth: 600 mm Power: 11 kW; The station features a Schott Systema+ hydraulic tank hook system! New painted We can Offer 1 or 2 Containers

PRESSTATION KBW1593 WITH SCHOTT SYSTEM FOR SALE OR RENT! Technical data: Pressing force: 33 t/330 kN; Filling opening: 1,760 x 1,885 mm; Pressing chamber opening: 1,475 x 1,880 mm; Year of production: 2009 Electrical technical parameters: Power: 5.5 kW; Electrical connection: 5 x 2.5 mm² - CEE - plug 32 A; Duration of one working stroke: 55 sec. PRESSTATION CAN WE OFFER WITH 1 OR 2 BOXES.

Lippert belt conveyor GF 1810-650-500 RA1438 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1810 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Liebherr R924C HD-SL Crawler Excavator, - Year of manufacture 2008, - Engine: 4-cylinder inline engine (Liebherr D 934 S)., - Power: 130 kW (177 HP) at 1800, - Operating weight: approx. 26,500 kg - 27,300 kg (depending on equipment)., - Undercarriage (HD-SL): Heavy version, wide track, long undercarriage., - Transport dimensions: approx. 9.9 m x 2.85 m x 3.07 m., - Grab depth: approx. 7.0 m., - Range: about 10.2 m.

Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2019 Fits 4-wheel MGB flat-top trailers Stationary EXW Vilnius - 5100 EURO

Cylindrical grinding machine manufactured in 1999. This STUDER S30 LEAN PRO features a B-axis with a rotation of +/- 195°/15°, X-axis travel of 275 mm, and Z-axis travel of 1050 mm. If you are looking to get high-quality grinding capabilities, consider the STUDER S30 LEAN PRO machine we have for sale. Contact us for further details.

Press container LM10 ASG Type – LM10 ASG Manufacturer – Ludden and Mennekes Year of production – 2012 Capacity – 10 m³ Power – 4kw

An air-cooled Lennox chiller is available. Cooling capacity: 312kW, power consumption: 96kW, refrigerant: R407C, refrigerant circuits: 2, filling quantity: 2×38kg, compressors: 4, evaporator: plate heat exchanger, water flow rate: 41.2m³/h, pressure loss: 82kPa, glycol content: 30%, air volume flow: 62000m³/h, operating pressure range: 19bar-32bar, test pressure range: 15bar-29bar. Machine dimensions X/Y/Z: approx. 4750mm/1950mm/2000mm, weight: approx. 3300kg. A coil is leaking, and a fan is missing. Documentation available. An on-site inspection is possible.

Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.

PRESCONTAINER FOR SALE/RENT LM18 RPK The compactor is suitable for compacting secondary raw materials as well as foodstuffs or other wet waste. Year of manufacture: 2006 Volume: 18 m³ Dimensions of the container (L x W x H): 5800 x 2500 x 2550 mm Filling height without wheels: 1540 mm Compatibility: 370 kN Motor power: 5.5 kW

1,000 liter insulated beer tank/storage tank with insert heater Material No. V2A Year of construction 1998 Total height 2060 mm diameter 1000 mm Outer diameter 1150 mm execution isolated Topsoil: downward-facing filling pipe DN25 Threaded fitting 1 1/4" Ventilation nozzle DN80 Cylinder: 50 mm insulation Weld-on fitting DN40 tangential (lateral) Insert heater Threaded weld-on fitting DN15 Underbody: dished end/curved end Forward-extended residual drain pipe with DN40 threaded connection, centrally located 3 profile feet with adjustable height caps

The ULMA Packaging Pacific LSBI 55 is a horizontal flow wrapping machine (HFFS – Horizontal Form Fill Seal) designed for the automatic packaging of a wide range of food products, particularly fresh and perishable items such as meat, poultry, and prepared foods. The machine operates with a bottom film reel (LSBI configuration), where the packaging film is fed from below the product infeed level. This design minimizes contamination risks in the sealing area and ensures high-quality hermetic seals, making it especially suitable for hygienic food applications. The Pacific LSBI 55 forms a three-seal pillow pack by wrapping a continuous film around the product, creating a longitudinal seal along the length of the package and transverse end seals to close each pack. The system is compatible with shrink and barrier films and can be integrated into modified atmosphere packaging (MAP) or shrink- ...

LEO 1.5 / 2 LGP gasoline water pump - powerful and reliable high-pressure clean water pump., Equipped with a 6.5 HP 4-stroke engine (LEO, optional Honda/BS) and cast iron impeller for extra durability. , Ideal for irrigation, construction, industrial and municipal applications. , , Max suction height 8 m, max head suitable for long distances. , Compact, lightweight and easy to move. , Economical in fuel consumption and equipped with low oil pressure protection. , , Ready for immediate use - perfect for drainage, water transport and emergency dewatering. , Contact us for stock, price and delivery., , Throughput capacity: 20 m3/h, Max. head: 58 MWK, Max dirt passage: 3600 rpm, Weight: 25 kg, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Empty weight: 25 kg, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Ger ...

length: 1500 mm width: 1030 mm drawer block: vice: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1500 mm width: 1030 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: LPW Model: PowerJet 670 T4-V Twin Year of Manufacture: 2010 Type of Machine : Cleaning System Cleaning Medium: Aqueous cleaner (water-soluble, pH 7-9) Technical Specifications • Standard basket size: 670 x 480 x 300 mm • Alternative: 2 stacks (3 baskets each, 480/430 x 320 x 110 mm) on angle frame (max height 300 mm) • Maximum batch weight: 200 kg (average approx. 150 kg) • Cycle time: approx. 5 to 10 minutes per batch • Total filling volume: approx. 2,600 litres • Supply voltage: 3 x 400 V / N / PE - 50 Hz • Control voltage: 24 V DC • Total connected load: 70 kW • Dryer heating power: 24 kW • Other bath heating power: 60 kW • Air exhaust: 240 to 480 m3/h • Fresh water pressure: approx. 3 to 4 bar • Compressed air connection: approx. 6 bar (min. 4.5 bar) • Machine dimensions (without loading): 4,500 x 2,400 x 2,500 mm • Loa ...

Description: Vacuum hardening furnace XRETORT 700/25 series Year of Make: 2000 Info: Vacuum furnace system with control unit with pumping station and inert gas system The system stood around for a long time and is not calibrated. Vacuum pump is not included.

Squirrel wrapping machine, Fabr. Lippelt, Type

Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.

Tumbler Lutetia -Type: 1 -Power: 4 kW -Capacity: 950 L -With documentation -Weight: 800 kg -Working capacity: approx. 400 kg -Power supply: 400V 50Hz 3Ph -Made of stainless steel -Drum diameter: 970 mm -Dimensions: 2180 x 1200 x 1820 mm -Condition: Used in very good condition, overhauled, ready to work

Round and long moulder, Fabr. Kemper, type RULAX with Liftomat

Proofing Unit, Fabr.Lillnord, Type PG 100

Overview This microbrewery had to cease operations in recently. The original plan was to continue operations, but as this did not happen for various reasons, the entire equipment is now being sold as a whole. Equipment Steam generator with gasoil burner and its tank. Three-phase mill for grain grinding. 800-liter brewhouse with steam jacket consisting of boiler, filter tank, lung, liquor tank, tubular cooler, accumulated osmotized water tank, and 3 necessary pumps for its operation. Industrial osmosis and descaling equipment. 4 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1000 liters. 3 atmospheric cylindrical-conical fermenters with refrigeration jacket and a capacity of 1300 liters. 1 cooling system for fermenters with temperature control panel by PLC. 1 cleaning pump. 1 transfer pump. Several hoses necessary for transfers and packaging. 1 atmo ...

Lippert belt conveyor GF 5550-570-450 RA2488 Technical data: Conveyor length (NL): 5550 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5550 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...

This 3-axis DN solutions LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DN Solutions LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details.

Lippert belt conveyor GF 4585-570-450 RA2487 Technical data: Conveyor length (NL): 4585 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 4585 Nominal / outside width in mm: 570 Belt width in mm: 450 Driven: YES Engine type: SEW Movi-Mot KW: 1,1/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professio ...