127,909 used machines on RESALE, but how to find them? Machine Search
Ex proofed compressed air diaphragm pump, DH25-FA-1NN-M, DEPA, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Excellent condition The part was purchased from a company's spare parts warehouse and is in almost new condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our we ...
Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2500 kg Total power requirement: 45,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G
Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm
turning speeds: 3.000 U/min grinding wheel diameter: 150 mm table-size: 380 x 220 mm T-slots: 1x 0: 3~220 / 380 V total power requirement: 0,37 kW weight of the machine ca.: ca. 150 kg dimensions of the machine ca.: 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine Brand: DAF, Conditie: USED, Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 118 mm, Stroke: 126 mm, Engine Capacity: 8270 cc, Qty Cylinders: 6 Qty, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Blue , Working Hours: 5580 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 80 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/221628, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: DH 825 MG; Transport weight [kg]: 1200
2011 Satronik DHDS-5500 Plasma cutting device: Table size 4700X13000mm Useful cutting area: 4000X12000mm Program language: G kodos Topaz Cutting range: Lv2-Lv30mm Angle cut: up to Lv25mm High speed:19000mm/perc/MIN Find more here - / Contact us at -
CNC lathe Type: BNA-42 DHY Manufacturer: Citizen/Miyano Year:2011 Control: Fanuc Hours: 23240 Number of spindles: 2 Number of turrets: 2 Number of c-axes: 2 Number of y-axes: 1 Bar diameter (max): 42 mm Max turning length: 150 mm Main spindle Spindle revolutions (max): 6000 rpm C-axis: yes Counter spindle Spindle revolutions (max): 5000 rpm C-axis: yes X1 axis: 140 mm Z1 axis: 235 mm Y axis: 70mm(±35) X2 axis: 140 mm Z2 axis: 360 mm Number of tool positions (total): 14 Rotation speeds (max): 5000 rpm Mains power supply: 31 kVA Mains voltage: 400 V Mains frequency: 50 Hz Dimensions: 2240 x 1450 x 1660 mm Total weight approx.: 3100 kg Bar feeder IEMCA Boss 552 HD Machine in good condition, under power Find more here - / Contact us at -
Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder
AUDATECH (GEMMA GROUP) double head electronic cut-off machine model DH550: - for cutting PVC, aluminium, wood-aluminium profiles - all electronically managed: touch-screen programmer model TS9003, windows operating system, with USB socket for downloading cutting lists and with office ethernet connection - fixed left head, and mobile right head with automatic sliding on THK guides and with brushless motors - blade diameter 550mm, with micro-drop cutting lubrication - inclination of the heads from 22.30° to 157.30° managed by CNC - cutting length between the two blades from 380 to 4000mm - for cutting lengths greater than 4 m: possibility of automatic workpiece recovery by means of the moving head - 4 adjustable horizontal pneumatic clamps - 2 adjustable vertical pneumatic clamps - pneumatically operated central intermediate support - Profile support roller conveyor combined ...
Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
Double diaphragm pump with air drive DEPA type DH40-FA-ZRTDreactive air diaphragm pump, double pumpSeries No.: B1802498 year of construction 09.05.2018Temperature: max. 130CBau size: 40Grain size: max. 16 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/8Suction connection: 1 1/2Pressure connection: 1 1/2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE- Balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H: 370 x
Double diaphragm pump with compressed air drive DEPA type DH50-FA-ZRTDoduct diaphragm pump, double pumpSeries No.: B1600416 year of construction 26.01.2016Temperature: max. 130CBausize: 50Grain size: max. 18 mmSuction height: approx. 2 mSuction height product filled: approx. 9 mOperating pressure: max. 7 barAir connection: 3/4Suction connection: 2Pressure connection: 2- self-priming- Aluminium housing- Diaphragm plate made of stainless steel- Diaphragm made of nopped E4® PTFE Composite balls made of PTFE- Ball seats made of stainless steelSpace required: L x W x H 550 x 350 x
Collet Chuck Kitagawa DHP65 A8 New in the box For type Hainbuch collets
Key data: 3100 mm, 16 mm
- Year of construction 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Stroke rate: 10 /min - Oil tank: 410 l - Engine power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Rated current main fuse: 100 A - Dimensions WxHxD: 3750 x 2400 x 3425 mm - Weight: 13800 kg
bore capacity in steel (diameter): 28 mm throat: 200 mm bore stroke: 105 mm table surface area: 360x340 mm Distance spindle/table max.: 540 mm turning speed range - stepless: 120-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -
Engine Brand: DAF, Condition: USED, Engine Aspiration Type: TURBO INTERCOOLER , Bore: 118 mm, Stroke: 126 mm, Engine Capacity: 8270 cc, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/daf-dhs-825-used/859, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DHS 825; Transport weight [kg]: 728
Dimensions (L/W/H): 3500x1500x1650 mm Weight: 2200 kg Total power requirement: 40,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 610 mm, 500 t
From MTrent Machining Centers UE 110-5A Year of construction 2012 Diameter 610 mm With extended clamping surface 1100 x 610 mm Weight 850 kg
sheet width: 3100 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 14 Stück no. of strokes: max. 11 Hub/min cutting angle: 1°15 work height max.: 770 mm column arm: ? mm oil volume: 300 ltr. control: konv. total power requirement: 15.0 kW weight: 11800 kg range L-W-H: 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge on recirculating ball screws Movement by push-button (forwards backwards) including ELGO digital position indicator - Manual quick cutting gap adjustment by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency s ...
Key data: 400 mm, 2200 mm
Double cross-cut saw Hüllhorst Type DH 50 Maximum working width 2200 mm 2 saw motors Motor power 3.7 kW each Saw blade diameter maximum with splitting wedge 400 mm Saw blade spindle diameter 35 mm Cutting height maximum 100 mm Cutting width minimum 210 mm Support bars length 2500 mm 2 front stop rails 1 piece length 1200 mm, 1 piece length 2400 mm With extraction connection and pipe Including 10 saw blades with a diameter of 400 mm Weight approx. 1300 kg Shipping Dimensions 3900 mm x 1300 mm x H 1200 mm
General SKU254S227 MakeElmess (D) LocationBarneveld CEcheck TypeDHG01B03St/SE-4 Flow heater Pressure Working pressure2 Bar Main Features Heating (medium)Electric Capacity8 KW Temp.820 °C Specified Features - Temperature control unit MaterialStainless steel 1.4541 (321) Temperature control units Horizontalflow heater Number of tubes:1 Tube diameter76,1mm Tube length900mm Wall thickness tubes2,9mm Max. temperature-10/550...820 degr. C Shell diameter219 mm Temperating machineflow heater Gas heatingcheck Electric capacity4 kW 230 Volt (2x) Temperature-10/550...820 degr. C With temperature controllercheck Information No.826280/001 and 826280/002 Mach.No.826280/001 and 826280/002 Year of construction2016 With switchgear(as is) Floorspace1,6x0,9 M Total height1,2 M Weight700 Kg Extra SpecificationsUNUSEDTemperature control unitsElmessHeat exchangers > Temper ...
Geared motor FARMER Type BF50-04/DHE11LA4 Volt 3 chamfer 400 volt 4 KW 56 RPM Hole 50 mm IE2 L 60.00cm W 30.00cm H 50.00cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
: gebraucht : 2002 : 090129 : prompt, Zwischenverkauf v : Türkei : 27800 € : 1 : 3100 mm : 10 mm : 350 mm : 10 1/min : 1.5 ° : 1000 mm : 22 kW : 3800 mm : 3600 mm : 2000 mm : 9800 kg Swing cut construction NC-preselection system ENC100 for back gauge, cutting length and piece counter Motorized back gauge 1000 mm on ball screws, folding upwards Hydraulic hold down pistons Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Oilfilling Light barrier on the back of the machine User manual in GERMAN with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de
table length: 1200 mm table width: 1200 mm table height: 840 - 890 mm weight of the machine ca.: 0,32 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NEW Pallet fork 1200 x 120 x 50 mm FEM 2A 2.5 t load capacity Carrier width 1.20 m with Liebherr 506 attachment
Haas Laser HL 1203D Optics Construction: 22-31-21-BX Laser class 4 1500 W 1064 nm More items - new and used - can be found in our shop! International shipping costs on request!
new
All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de
Max. blank / workpiece over bed1200 Max. blank / workpiece in the gap2400 Ø Centre height over bed600 mm Distance between centers2350 mm Length of the gap400 mm Maximum sheet thickness6 mm Stroke X-Axis1200 mm Stroke Y-Axis300 mm Speedrange6 - 675 Rpm Power40 kW Stroke pinole quill750 mm
Automatic lathe Locatelli MK-CC 1200 Turning length 1200mm Automatic loading of scantling from the feeder 3 duplomatic knives floating on a template 3 top commuter knives Face drilling in material capability Modernized machine control in 2023
LED high bay light, light fixture, high bay light, industrial lighting, industrial lamp, linear light, LED spotlight, high bay low beam light -Manufacturer: lichtline, LED high bay light with swivel arm -Power: 150 watts 5000K -Swivel arm: Length 3860 mm -Dimensions: 3860/340/H210 mm -Weight: 56 kg
MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven
Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...
Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.
CIAT LGP 120V Product number:M14-4139 Cooling capacity:34,5 kW Refrigerant:R410A Refrigerant Content:3,3 kg Voltage:400 Volt Dimensions:883x798x1201 mm Weight:240 kg Year:2008 Number in stock:1 piece(s) Price:Quotation request Well maintained Ciat water chiller / heat pump with limited running hours. The heating capacity is 40,5 kW at an water outlet of + 45°C. Please visit also our website: used-refrigeration
24Volt 120 Ampere! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 120 Ampere good condition More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price
CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 120cm Width: 200cm Height: 200cm Electric power: 4.5kW Delivery time: After the payment, from the stock
Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION
Hydrovar + motor without pump, HV3.3 f/120c + LM100RBM14/330, Lowara, used Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law app ...
maximum number of results exceeded
please refine your search
