134,049 used machines on RESALE, but how to find them? Machine Search
live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg
High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.
grinding length: - mm grinding width: - mm workpiece height: - mm workpiece diameter: - mm material thickness: - mm centre distance: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 4104 Throughfeed grinding / deburring machine LINEAR ABRASIVE Isolde The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Display, display module, display panel -Manufacturer: Rittal Carel, Display Panel -Rittal: Type LKH -Carel: Type RITRC000T0001 -Dimensions: 440/190/H60 mm -Weight: 0.6 kg
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D09M7C / LRD10C -Number: 1x contactor available -Dimensions: 125/45/H85 mm -Weight: 0.5 kg
Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg
Control cabinet and distribution board construction, busbars, busbar supports, busbar adapters, OM adapters -Manufacturer: wöhner, busbar adapter -Type: EEC6080-L MCCB LUB 12 LUB 32 -Item No.: 32 427 -Number: 10x adapters available -Dimensions: 60/45/H200 mm -Weight: 0.3 kg
Used LOOS DF 1000 steam boiler. Technical parameters: "WEM" type water treatment module water preparation module type "WSM-T 2.0" LOOS-DAMPFFIX steam generator type "DF 100010", new: 2006 total volume 110l max pressure 13Bar max temp 195 degrees Celsius 2,000L fuel oil tanks complete steam reduction station 10bar/4bar hot water preparation station with a 400l tank copper coil water treatment system
Used Self-cleaning milk centrifuge. Technical parameters: type: Alfa – Laval MRPX 214 self-cleaning nominal capacity 12,500l/h Siemens control and inverter for the main drive motor foundation slab made of acid-resistant steel water treatment kit made of acid-resistant steel main engine 15kW
Used milk centrifuge made by Spomasz, type: LWG-47 (Alfa Laval replacement). 6 pieces available.
Circuit breakers, motor protection circuit breakers, power disconnectors, low-voltage networks, circuit breakers for transformer, generator and plant protection, voltage releases -Manufacturer: AEG, circuit breaker -Type: LS4 -Number: 2x switches available -Price: per piece -Dimensions: 70/45/H100 mm -Weight: 0.4 kg/pc.
Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Schneider Electric, Power Contactor -Type: LC1D245...C -Contactor coil: LX9FG220 -Number: 2x contactors available -Price: per piece -Dimensions: 200/170/H180 mm -Weight: 4.6 kg/pc.
Safety switches, rope pull switches, rope tensioners, tensioning devices, rope tensioner system components -Manufacturer: Allen Bradley, Guardmaster Lifeline Rope Tensioner Rope Pull Switch -Type: LRTS -Quantity: 1x cable tensioner available -Dimensions: 90/90/H45 mm -Weight: 0.3 kg
Height gauge, parallel gauge, height measuring device, height measuring and marking device, height marker -Manufacturer: KS Lenze, height gauge type C500-23 -Max. working height: 520 mm -Number: 2x height gauges available -Price: per piece -Dimensions: 240/175/H575 mm -Weight: 7 kg/pc.
Rear axle, steering axle -Manufacturer: Linde, rear axle steering axle from front forklift type H30T -Individual components: see photos -Price/Fee: complete -Dimensions: 1140/410/H350 mm -Weight: 105 kg
Three-phase motor, electric motor -Manufacturer: Leroy Somer, electric motor type LS100L T -Power: 3 kW -Speed: 1415 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP 55 -Dimensions: 350/200/H245 mm -Weight: 20.7 kg
Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 8-hole steel rim -Type: 6.50F-10 -Hub bore: Ø 190 mm -Bolt circle: Ø 210 x 12 mm -Quantity: 4x rims available -Price: per piece -Dimensions: Ø 300 x 200 mm -Weight: 10 kg
Lauber Wood dryer longitudinal ventilation, type 4 K-7, Chamber with stacking trolley Contents of the wood dryer: The wood dryer holds 1 parcel with a width of 1.40 m 1 parcel in height of 1.25 m 1 parcel in length of 6.40 m The wood dryer has a total gross volume of 11.2 m³. The wood dryer holds 7.2 m3 of wood net, based on a wood thickness of 50 mm, a stacking strip thickness of 20 mm and 90% width utilization with edged wood. External dimensions of the wood dryer excl. control cabinet: Width: approx. 1.60 m Height: approx. 1.90 m Length: approx. 7.50 m Heating capacity 24.0 kW More info on request
Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 4-hole steel rim -Type: 3.00D-8 ET-10 603663 -Hub bore: Ø 60 mm -Bolt circle: Ø 100 x 16 mm -Quantity: 1x rim available -Dimensions: Ø 240 x 105 mm -Weight: 3.4 kg
Bakon Apricot/Fondant Coating Belt Line Year of construction 2000 Continuous flow device, with round belt spreader belts with instantaneous water heater system and jelly instantaneous water heater Working width 550mm Apricot station with airless nozzles Fondant station with splash device and nozzles for zigzag pattern with drying tunnel with melting tank for approx. 100l fondant with spared material pump - Bakery condition not cleaned - partially. in need of overhaul
Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 6-hole steel rim -Type: 7.0-15 -Hub bore: Ø 160 mm -Bolt circle: Ø 205 x 22 mm -Quantity: 2x rims available -Price: per piece -Dimensions: Ø 460 x 225 mm -Weight: 30 kg/pc.
Key data: 55 KW, 300 1/min
Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled
Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...
Power supply, power supply unit, ballast, driver Manufacturer: GIB Lighting, ballast -Type: Pro-VT 250W -Quantity: 10x ballasts available -Price: per piece -Dimensions: 185/90/H80 mm -Weight: 3.7 kg/pc.
Workbench, work table, assembly bench, assembly table, work table -Manufacturer: KLW Lutz, workbench / solid worktop with base cabinets -Worktop: 2500/700/H850 mm -2x drawer cabinet: 2 drawers, layout/height see photos -Transport dimensions: 2500/700/H855 mm -Weight: 152 kg
Key data: 2640 KW, 3300 kVA, 400 V
STAMFORD Synchronous Alternator LVSI 824 F2 3300 KVA 400 V 4763 A 50 Hz, 1500 1/min. Tech. Equipment: - 2 sets of Winding PT100 - AVR MA325, PFC-3 COMPLETELY OVERHAULED, restored, windings impregnated
Key data: 330 , 413 , 400
Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 3 m² Weight approx.: 2.500 kg There is also an identical system as a spare parts dispenser as an option for an extra charge. The control panel is missing here. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1135 mm, 2000 mm, 700 1/min
Stock number: 3915 CNC LATHE Manufacturer: PROKING, Type: LC4506020 Machine NO.: 13021056, Year of manufacture: 2011 Specifications: Max. turn. About Bed 1135 mm DIA. Turning length 2000 mm Turning over planing slides 760 mm dia. Main motor power 30/37 kw Main spindle speed range 7-700 rpm Spindle bore 153 mm dia. C Axes Tool turret with 12 VDI stations Max. workpiece weighted 3500 Whitout steady Kg Control FANUC 0iTF Fabr. Operating hours spindle 3032 hours Accessories: Hydraulic Main Centering Chuck 800 mm dia. Chip conveyance. 2 pcs Tailstock Length: 5720 mm, Height: 2520 mm, Width: 2766 mm, Weight: 12,000 kg
-Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece
Free Gravity Mixer Drum in stainless steel Angle adjustment of the drum and emptying possible via lateral lever with grid Volume: approx. 140 litres Voltage: 400V, direction of rotation reversible via changeover switch Weight: approx. 120kg Drive via gearbox, no sprocket, therefore almost indestructible Control box in the machine stand with two timers, possibly an interval control Lid closes tightly and can be removed without tools Machine stand has rust attachments and should be painted Video about test run available
Key data: 800 mm, 650 mm, 550 mm
Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 3.5 kW -Output: 105/140V 291/391Hz -Power: 3.4 kVA -for edgebanders, edgebanding machines -Weight: 120 kg
Key data: 400 KW, 570 kVA, 400 V
Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued ...
PTO adapter, PTO shaft, profile shaft -double-sided toothed -1 Toothed design: Ø 35 x 105 mm -2 Toothed design: Ø 42 x 150 mm -Total length: 405 mm -Number: 21x waves available -Price: per piece -Weight: 4 kg/piece
Cardan shaft, drive shaft -Flange: Ø 120 mm -Toothed shaft: Ø 50 mm -min. length: 665 mm -Max. length: 780 mm -Weight: 14 kg
Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece
YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz
Inkjet printing system with Secure Track and Trace solution TTS. A marking and verification system for corresponding folding boxes (single or double-sided). Machine incl. PLC SIEMENS type Simatic S7-1200, Printer REA-Jet HR pro, etc.
Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992
Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg
-Brake module -Input: 375VDC 5.4 A -Output: PAV=70 Ppk=2KW -Number: 2x converters available Price: per piece -Weight: 3 kg
Schütz, Schütze, Leistungsschütz -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 19 available Price: per piece
Schütz, Schütze, Leistungsschütz -Power contactor: 18.5 kW -Coil voltage: 220 AC -Number: 20x shooters available Price: per piece -Dimensions: 85/110/H110 mm -Weight: 1 kg
Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 102.36.99.48.0596 Construction year 1996 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Condition machine working Control type B&R Electric connection 3x380V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos
LASKA Angle Mixer Grinder Type: WMW 1680 Year of Make: 2000 Mincer: 160 mm Perforated Discs Ø 2 speeds Wolf motor: 26 / 34 kW 800 litre mixing trough Maximum mixing capacity: 650 kg 2 paddle mixing arms 2 mixing speeds (forward + backward) Hydraulic loading for 200 litre cutter wagons Hydraulic Discharge Flap Emptying auger Machine surface / screw / housing: stainless steel Tool trolley in stainless steel completely overhauled Shipping time: immediately
The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.
maximum number of results exceeded
please refine your search
