132,187 used machines on RESALE, but how to find them? Machine Search
Alfa-Laval liquidring pump. MR200. 7.5 KW. Only 1 more available Fully tested, excellent condition
Control unit for electric forklifts, electric motor, DC motor, drive motor, motor control, motor controller, control, drive control, voltage converter, cooling fan, radiator, fan -Manufacturer: Linde, cooling fan from Linde R14 forklift -Dimensions: 260/150/H80 mm -Weight: 1.0 kg
Waukesha Rotary lobe pump 060 7,5 KW 1440 RPM Excellent condition
hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg
Alfa-Laval multistage / centrifugal 3-stage pump YOM 2001 22 KW 2930 RPM Made in Denmark
Welding rectifier, electrode welding machine, electrode welding rectifier -Manufacturer: Migatronic, welding rectifier type LDE 250 -Welding power: max. 250 A -Welding cable with electrode clamp -ground cable -Dimensions: 860/680/H650 mm -Weight: 164 kg
Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Alfa-Laval centrifugal pump fully overhauled YOM 1999 18.5 KW 2920 RPM
Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha
Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece -Dimensions: 75/45/H60 mm -Weight: 0.1 kg/pc.
ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters
Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.
Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm
Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...
From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax
Key data: 205 mm, 650 mm
For sale: Gildemeister CNC lathe type Sprint 65 Linear equipped with a Fanuc 310I control. This CNC lathe is equipped with 2 equal spindles with a bar passage of 65 mm. The machine also has three turrets with 12 positions where you can place driven holders in any position! The upper turret is equipped with a Y-axis with a displacement of 80 mm ( (+50, - 30 mm). The turning diameter is 205 mm. The maximum turning length is 650 mm. The movement X1, X2, X3 is 165mm, the Z1 axis movement is 220mm, the Z2 axis movement is 150mm, and the Z3 axis movement is 768mm. The W2 axis movement is 690 mm and the maximum rapid traverses are 30 meters/min. The maximum speed of both spindles is a speed of 5,000 rpm and both spindles have a full C-axis. The tool holder holder on all turrets is VDI-30. The machine is also equipped with a hinged belt chip conveyor with right ejection and the machine has an Ir ...
Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg
Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 300/280/H80 mm -Weight: 3 kg
High-frequency ignition device, heating, gas and oil burner, automatic gas burner, gas relay, Control box, burner control -Manufacturer: Siemens, automatic gas burner -Type: LFL1.333 -Dimensions: 120/105/H105 mm -Weight: 1.2 kg
Tumbler Soma, approx. 80 liters volume, completely in stainless steel, with vacuum pump and timer, Connection 400V, dimensions LxWxH approx. 117x97x120cm, weight approx. 230kg, older device, good used condition, fully functional
Used vertical stainless steel tank, 5000 L volume. Tank with frame agitator and jacket (cooling-heating).
Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.
Heat exchanger, cooling coil, cooling pipe, cooling spiral -Heat exchanger: cooling coil with fins -Dimensions: see photos -Material: aluminum -Transport dimensions: Ø65 x 365 mm -Weight: 0.5 kg
Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters
Leadwell MCV 610CR Vertical Machining Center :::SPECIFICATIONS::: CNC Model: Fanuc CNC Version: 0 - M Tool holder: ISO 40 Spindle speed: 6000 Number of tools: 24 X-axis stroke: 610mm Y-axis stroke: 410mm Z-axis travel: 510mm Rapid feeds for linear axes X Y Z: 20m/min Table size: 890 x 500mm Table capacity: 300Kg Machine equipment: Fourth axis table :::D DIMENSIONS AND WEIGHT::: Length: 2040mm Width: 2820mm Height: 2800mm
PLC control, electronic control card, control card, output card, controller -Manufacturer: Siemens, Simatic PC 612 F control card -Type: PC 612 F B1100-F425 C79458-L9001 -Dimensions: 250/200/H20 mm -Weight: 0.5 kg
Key data: 6 , 230 mm, 150 mm
I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.
Key data: 4 , 300 mm, 200 mm
I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !
Gear motor, electric motor, electric gear motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from folding machine Lotze HDZK -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380V -Dimensions: 980/400/H410 mm -Weight: 255kg
Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg
Bending tool, die, upper blade, upper tool, upper jaw -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm / M10 -Dimensions: see drawing in the photos -Dimensions: 2678/15/H57 mm -Total weight: 15.7 kg
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg
Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box
Automatic punching machine for Wire-O and more Make JBI - Lhermite Model Lhermite EX610 Year 1985 Minimum size 90 x 110 mm Maximum size 530 x 610 mm Capacity up to 2.5 mm thickness depending on materials Speed up to 8.400 cycles per hour, depending on size and materials Tools Wire-O 3:1 with square holes, platic comb punch, spiral punch, 4 hole punch for ringbinders Video click here
Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SMTO-1_PS-S-LED-24C 151685 -Number: 2x switches available -Price per piece -Dimensions packaging: 150/110/H20 mm -Weight: 0.1 kg/pc.
Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SME-8-S-LED-24 693 425 -Switch: Festo 150 857 N413 -Number: 8x switches available -Price per piece -Dimensions packaging: Ø 100 x 10 mm -Weight: 0.1 kg/pc.
Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch, unused, original packaging -Type: SME-8-K5-LED-24 175 404 -Quantity: 1 available -Price: per piece -Packaging dimensions: 150/60/H30 mm -Weight: 0.1 kg/piece
Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored
diesel tank system, diesel tank, gas station, fuel tank system, fuel tank, petrol tank -Diesel tank: fuel tank, universal use -Content: approx. 45 liters -Tank: dimension 620/220/H330 mm -Total dimensions: 660/220/H610 mm -Curb weight: 11.7 kg
Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT 380.RM -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg
Used ribbon mixer by Riela. Capacity 2000 L. Engine power 11 kW.
maximum number of results exceeded
please refine your search
