l cd 9 used for sale

Carousel press with hydraulics from the manufacturer LISY - DVOŘÁK Working length: 2200 mm Working width: 1200 mm Maximum wood thickness: 60 mm Max pressure: 100 bar

Warehouse inlet line, System Logistics brand.

Warehouse outbound line, System Logistics brand.

Warehouse outbound line, System Logistics brand.

X-travel: 500mm, y-travel: 275mm, z-travel: 300mm, max. feed rate: 15m/min, max. laser power: 700W, clamping stroke: 4mm, control: HEIDENHAIN TNC 407.

There are two identical lasers LASAG AG OS SLAB, pulse duration: 0.1-0.5ms, wavelength: 1064nm, max. laser radiation: 1mW, year of construction laser 1/ 2: 2002/ 2003.

There are two Laser Sources Rofin DC 025 available, weight: 545kg, operating hours computer and HF tube machine 1/2: 58,245h and 22,072h/ 39,558h and 10,099h, with documentation, there is also a rack the for laser source DC025 available.

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

Technical details on demand.

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout.

Etikettenlänge: 80-200mm, Gebindegröße: 2-25kg, machine was overhauled in 2018.

Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15.

There are two identical lifting tables available, stroke: 1310mm, load: 7.5t, length: 3000mm, width: 2850mm, height: 430mm, weight: 2.9t.

Max. load: 50kg, min. pick up height: 700mm, max. dropping height: 1800mm, stroke: 1100mm, the machine was hardly used, with bottom plate and documentation, without spare parts.

There are two identical pumps available, motor power: 7.5kW, the pumps were never used.

Max. total load: 5t, weight: 8.89t, without accessories, spare parts or documentation, was maintained regularly.

This LVD Orion 3015 Plus 2.5kW laser cutting machine, manufactured in 2018, features a FANUC CO2 2500 W laser source, 3000 mm x 1500 mm maximum sheet size, and a cutting head with 5, 7.5 lens cassette. Equipped with Laser Eye technology for precise sheet positioning and capacitive height detection, it ensures efficient and accurate cutting. The machine also includes cutting process monitoring and automatic on/off switches. Paired with cooling and extraction equipment, it offers a comprehensive cutting solution. For those seeking a reliable laser cutter, consider this LVD Orion for an optimized production process. Contact us for more details.

This Sei Laser Mercury 1530 Fiber laser cutting machine was manufactured in the year 2017 and has 4000 production hours. The machine has a laser power of 1,5 kW.

Laser S.R.L. mobile cookie sandwich machine (like Oreo cookies), model: SM06, number: SM06 2231 07, 400 V, 3 Ph, 50 Hz, 4 kW, cookie size: L 80 mm, dimensions filling machine: 2250 mm x 800 mm x 1670 mm. With 2 OSCA Automazione infeed slides, type: VL40, 230 V, 50 Hz, dimensions infeed: (2x) 2300 mm x 550 mm x 1600 mm.

Lexus car, type: LS600H L, model: UVF46L-AEXGHW, VIN: JTHDU46FX05009962, year of construction: 02/02/2009, fuel: benzine, EURO 4, mileage: 447913, official Lexus dealer serviced, last service: 26/04/2022 - 401086 km.

Lauer reverse osmosis system consisting of: Lauer reverse osmosis device, type: Aquaboss EcoRO Dia II 1800, serial number: 200336, year of construction: 2004/01, 400 V, 50 Hz, 14.15 A, max 25 bar, temperature range: +5°C-+40°C, dimensions: 1900 mm x 900 mm x 1850 mm. Lauer mobile reverse osmosis device with central concentrate supply, type: SoftControll II, serial number: 400209, year of construction: 2004/02, 230 V, 50 Hz, 0.06 A, max 6 bar, temperature range: +5°C-40°C,dimensions: 2000 mm x 800 mm x 2050 mm. S/s rack with Lauer water softeners, type: Duo AK I-ZG 2000, serial number: 600517, year of construction: 2004/05, 230 V, 50 Hz, max 6 bar, temperature range: +5°C-+40°C, dimensions: 1200 mm x 830 mm x 1900 mm. Lauer tank with 2 IMI pressure expansion vessels, type: ADF 50.10 and central concentrate supply, type: CCS-PII, dimensions: 2100 mm x 1500 mm x 2000 mm. L ...

Leich + Mehl weighing and labelling machine with top and bottom labeller, type: LPA 20-OU and UET 2000-S, fabrication number: 14132 and 11585, year of construction: 2020, 230 V, 50 Hz, plastic belt, belt width: 300 mm, total dimensions: 1400 mm x 700 mm x 1900 mm.

Lainox combi steamer, type: NAEB201R, model: LX TYP NAEB201, number: LA020154398, year of construction: 2019, 400 V, 3 Ph, 50 Hz, 31.8 kW, electric heated, dimensions: 1000 mm x 960 mm x 1820 mm. Including 3 s/s trolleys, 15 floors, floor dimensions: (15x) 530 mm x 330 mm, trolley dimensions: (3x) 700 mm x 480 mm x 1700 mm.

Lubron reverse osmose system, type: OSMOSTAR 1500, serial number: 36945, year of construction: 2003, dimensions: 600 mm x 800 mm x 1700 mm, plastic storage tank, dimensions: 600 mm x 800 mm x 1450 mm and 2 Grundfos centrifugal pumps, capacity: 2.5 m³ per hour, dimensions: 600 mm x 700 mm x 1250 mm.

Pallet with various scales, cash registers and label printers, brands among others.

Laska cutter, steel bowl, volume: 90 liter, total dimensions: 1850 mm x 1400 mm x 1250 mm. Incomplete.

Lakidis Nikolaos s.a. mobile lifter for 200 liter meat bins, model: Lifter, type: ELV 200L, serial number: 622215, 0.75 kW, capacity: 250 kg, elevating height: 1980 mm, total dimensions: 1680 mm x 1370 mm x 2920 mm.

Loma Systems metal detector, type: Loma Superscan S, serial number: 295063, 240 V, 50 Hz, plastic string belt, clearance: 345 mm x 90 mm, total dimensions: 1180 mm x 600 mm x 1090 mm.

Lutetia vacuum tumbler, volume: 1800 liter, Leybold vacuum pump, type: SV40B, capacity: 40 m³ per hour, dimensions: 3300 mm x 2100 mm x 2300 mm.

Lakidis frozen block cutter, model: Guillotine, type: GN-400, serial number: 590120, 2.2 kW, capacity: 900-1500 kg/hour, working width: 400 mm, distance between knives: 100 mm, total dimensions: 2250 mm x 900 mm x 1720 mm.

Lifting device for meat transport, dimensions: 3150 mm x 1100 mm x 1950 mm and 1300 mm x 900 mm x 200 mm.

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

Currently cheap for sale Originals layher AR Vertical Stems 3 meters. Available approx. 300 pieces Approx. 70 pieces per pallet Large quantity used Layher available . Stock list on request

Ø Steel floor 0.73 x 32 CM burnt like new. Only 79 available Large quantity layher allround available. Only original Layher Up-to-date stock list on request

Manufacturer: Telstar Telstar Model: LPP1600 Year : 1997 (never used) Material :Polished stainless steel Power : 2500 w 1 vertical box 1 horizontal box Flux placed across the width of the other box Control panel on 1 side 3 sides with straps 3 neon lights laminar flow surface 200 x 150 cm Height: 200 cm Overall dimensions 250 x 150 x 250 cm Feet or suspension mounting required

Control cabinet with control panel for Lompas DN 250 pallet nailing machine; Control original GE FANUC Series 90-30 controller; keypad for machine operators; Ready for use until dismantling, dismantling, ready for loading Freight forwarding

Description: maximum lifting height approx. 810 mm , maximum load capacity 1000 kg , Battery voltage 12 V , with charger , Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,500 mm, weight approx.: 150 kg

Description: Width 900 mm Length 1500 mm Lifting capacity ,Max 700 kg Approx. Onsite Dimension. (l x w x h): 1,100 x 1,500 x 1,000 mm, weight approx.: 400 kg

Layher Allround Ø Step-through 2.07 Alu Without ladder 8 pieces available Very good condition If you're looking for more Layhers, check out our stock list today!

Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and  ...

Description: laser source: fiber laser class: class IV wavelength: 1 062-1 066 nm max. average output power: 500W nominal pulse energy: 50-100 mJ (depending on mode) nominal pulse length: 30-100 ns (depending on mode) frequency: 5-50 kHz max. power input: 4,5 kW focusing optics: 254 mm (100, 160, 420 mm) power chain length: 9,4 m power supply: 3×400 V, 16 A, PE-N, standard five-pin cooling: distilled water, 5 l machine in good technical condition, after agreement possibility of testing weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,700 x 1,400 x 700 mm

turning diameter over bed:1630 mm turning diameter over slide rest:1190 mm turning length:5000 mm centre height:800 mm swing in gap:2100 mm bed width:1000 mm max. workpiece weight:12000 (zw. Spitzen) kg number of spindle speeds:16 4 - 242 U/min spindle bore:120 mm tailstock quill diameter:180 mm tailstock quill stroke:350 mm Weight approx.:22 t total power requirement:ca. 25 kw Height of centres: 1350 mm Distance between centres: 5000 mm Swing over cross slide: 2600 mm Spindle power: 30 HP Spindle speed: 0,7 - 70 rpm Longitudinal swift Control on the carriage Chuck: diam. 2050 mm

turning diameter over bed:100 mm turning diameter over slide rest:70 mm turning length:80 mm total power requirement:1,0 kW weight of the machine ca.:0,5 t dimensions of the machine ca.:0,7 x 0,6 x 1,2 m facing lathe with manual feed, various accessories

turning diameter over bed:530 mm turning diameter over slide rest:320 mm turning length:2000 mm center height over bed:275 mm speeds:18 - 1600 U/min spindle bore:60 mm bed width:430 mm engine output:17 kW weight:2700 kg spindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

- Producer Leif & Lorenz - Type B2 - 1100 - Working width 1.000 mm - Working height ~ 800 mm - Number of curtain heads 1 Stk. - Curtain head, straight in line - Length infeed conveyor 1400 mm - Length outfeed conveyor 1400 mm - Length over all 3000 mm - Feed speed infinitely adjustable 30 - 150 m/min - Lacquer pump infinitely variable - Height adjustment manuell - Colour grün/green - Voltage / HZ : 50 V, 400 Hz - Total connection power ca. 3 kW - Location, on stock D-32825 Blomberg - Voltage fluctuation max. +/- 5%

Vertreiberbürste als Zubehör auf Anfrage lieferbar. - Producer Leif & Lorenz - Type B2 - 1300 - Working width ~ 1200 mm - Year of construction 2004 / 2005 - Working height ~ 800 mm - Number of curtain heads 1 Stk. - Curtain head, straight in line - Operating side, right - Length infeed conveyor 1400 mm - Length outfeed conveyor 1400 mm - Length over all 3000 mm - Feed speed infinitely adjustable 54 - 150 m/min - Lacquer pump infinitely variable - Height adjustment manuell - Colour 7035 - Voltage / HZ : 50 V, 400 Hz - Total connection power ca. 3 kW - Location, on stock D-32825 Blomberg - Voltage fluctuation max. +/- 5%

A complete filling, sealing, inspection and labelling line is available, includes (1) Tray Destacker Carsoe, year of construction: 2013 (2) Volumetric Filler Lieder/Robot Food Technologies AWF 2, year of construction: 2015, with lifting and tilting device for loading, suitable for free-flowing, non-sticky and low-liquid-content products (3) Tray Sealer Multivac T700, year of construction: 2012, suitable for closing prefabricated trays, bowls and cups, evacuating, gassing and sealing (4) Covering Machine Buhmann Servolid 400, year of construction: 2012 (5) Labeller Multivac MR300/400, year of construction: 2012, with two integrated TTO printers Videojet, suitable for labelling trays from above and below (6) Metal Detector Mesutronic, with automatic rejection for bad packs (7) Tray Packer Somic 424DT, year of construction: 2013, output: 15 cartons/min (8) Hot-Melt Gluer Nordson, printer fo ...

There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.