We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,280 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
workpiece return Brand: Ligmatech Type: ZHR 15/XX/LI The workpiece return enables one-man operation on edge banding machines. Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes. Via a scissor mechanism the parts are Upper pressure promoted this to an inclined plane, consisting of roller rails, transports. On this inclined roller conveyor, the parts slide by their own weight to the Operator back. The driven roller conveyor is equipped with a turning station the parts coming out of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can. To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use. Similarly, when not in use, the inclined roller The return path can be folded vertically upwards, so t ...
used
workpiece length ... 3000mm workpiece width ... 1500mm sheet thickness ... 20mm Laser power ... 4000W L x W x H ... 11351 x 5700 x 2200mm Machine weight ... 11000kg Accuracy - Repeatability ... 0.02mm Accuracy - Positioning ... 0.05mm Total power requirement ... 72kVA Control Fanuc ... Series 160i-LB The machine is in good condition, under power.
new
LILIAS ENGINE CONTROL LEVERS, BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720
Turning diameter: 1900 mm Turning length (Z-axis): 2500 mm Spindle bore: 102 mm Turret positions: 0 Motor power: 45 HP/kW Chuck diameter: 500 mm Swing over bed Ø: 1900mm Swing over cross slide Ø:1520mm DBC Turning Length: 2500mm Spindle bore: 102mm Spindle power: 45kW Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Length: 6800mm Width: 2800mm Height: 2800mm Weight: 10000kg
used
We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.
used
CATALOG NO. 6878 TECHNICAL DATA - length of the workpiece 2600mm - workpiece width 890mm - main engine 4kW - width of the sanding belt 160mm - fan - 4 types of rotation speeds + right / left - diameter of the exhaust connection 2x120mm - overall dimensions length/width/height 3750x1300x1450mm - weight about 800 kg ADVANTAGES – Polish production – with a fan – used grinder, very good condition Net price: PLN 6900 Net price: 1484EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)
used
- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.
used
This pressure vessel has a generous volume of 1500 liters, which provides enough space for your requirements. The container is designed for a permissible operating pressure of 11 bar, which ensures safe handling and storage. In addition, it is suitable for a permissible operating temperature of up to 50 degrees Celsius, so that it also works reliably at higher temperatures. This pressure vessel was manufactured in 2000 and has therefore been in operation for some time. Nevertheless, it is in excellent condition and continues to meet the required safety standards. Contact us without hesitation for more information or to request a personalized quote. We are confident that we can offer you the best possible price and are open to negotiations. Do not hesitate to contact us so that we can find a solution together." I hope this description meets your requirements. If you need more ...
used
Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...
used
LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...
new
Laboratory refrigerator Liebherr LCexv 4010, combination device, explosion-proof interior in accordance with the ATEX directive for the storage of explosive and highly flammable substances. Electronic temperature control with 0.1°C temperature display to the degree enables the most accurate temperature settings Built-in data storage with AlarmLog Two independent regulators and two compressors for optimum functionality and rapid cooling rate after door openings 1-point calibration SmartMonitoring Ready via RS485 interface potential-free alarm contact for connection to central building control centers Access for temperature sensor (Ø 10 mm) Practical drawers (in the freezer compartment) with transparent front for a clear view of the stored goods The doors are self-closing for convenient operation, the door hinge can be changed and the clamp seals are replaceable
used
Originated from LVD lasercutting machine
used
automatic workpiece loader
used
Nestro rotary valve, built in 2006, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Type: 37 21 12 Year of construction: 2006 Motor: 2.2 kW Max. flow rate: 12000 m³/h Max. inlet diameter: 450 mm Speed: 25 rpm. Dimensions: 2050 x 1260 x 1550 mm (LxWxH) Weight: approx. 1200 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Lamidesk EasyShift 400/160 Laminator Lamidesk EasyShift 400/160 Flatbed Laminator Characteristics: max. lamination width: 1600 mm max. lamination length: 4000 mm min. table height: 850 mm max. clearance height: 60 mm Max. speed: 0 - 25 m/min Control: Roller pressure: pneumatic Engine operation: yes Speed: Rotary control Equipment: Countertop: 10 mm toughened safety Height adjustment: optional Table lighting: optional Propulsion: Motor / manual Heated roller: optional Movable (rollers): yes Specifications: Compressor connection: Euro plug Air pressure / demand: 6 bar - 4 l/min. Power supply: 240 V Power consumption / with LED: 380 W / 780 W Device dimensions: 4710 x 1950 x 1000 mm Weight device: approx. 630 kg Quality LamiDesk is manufactured with well-known components that are available worldwide. The use of these components ensures continuous operation a ...
used
Qty. 1 Second-hand strip stretching and degreasing line Mfc.: Lenze / Eisenmann / Fröhling / Redex Built: 1986 Functions: trimming / stretching / rewinding / chemical degreasing / middle cut Max. production speed: 120 m/min Width: 600 – 1600 mm Thickness: 60 -500 µm Unwinding dimensions: max. 6.2 t / max. Ø 1700 mm Unwinding tension: 0.5 – 10 kN Spools: Q1, M70, Q3, Steel & cardboard sleeve, Rewinding dimensions: max. 3.1 t / max. Ø 1200 mm Rewinder tension: 0.5 – 10 kN Winder DC Engine Speed: 120 m/min Spools: Q1, M70, Q3 Stretching level: 0.1 – 2.8 Stretching force: 0 – 120 kN Annual capacity 8800 t/a (19 Shifts/week) Required space: Approx. 700 m² Operation direction From right to left (for the complete machine)
used
FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm
used
BATTERING-GLUING AND BREADING MACHINE, STEIN, MESH WIDHT 200MM Technical features: Battering-gluer: Material: Stainless steel Power supply: 380V-440 / 50-60Hz Battering-gluer dimensions: 1200 x 700 x 2000 mm Breader, Stein, model: E8J Serial number: 184 Bandwidht: 200 mm Dimensions: 2400 x 750 x 2000 mm
used
Line choke, air gap choke -Type: ELN1-0500H009 -Price: per piece -Number:4x available -Weight: 1 kg
used
Line choke, air gap choke -Type: 3005a/32532 -Price: per piece -Number: 5x available -Weight: 2.2 kg
used
Line choke, air gap choke -Type: ELN1-0900H005 -Price: per piece -Number: 6x available -Weight: 1 kg
used
Reflective light barrier, light barrier -Weight: 0.2 kg
used
Sensor, probe, immersion probe -Manufacturer: KFG Level, magnetic level sensor -Type: KA-10310/3 -Dimensions: 215/150/H75 mm -Weight: 0.4 kg
used
Line filter for frequency converters, PLC control, line filter, line filter -Lenze: Line filter E94AZMS0094 -Dimensions: 530/100/H70 mm -Weight: 6.1 kg
used
Brand: IQ-glass sulution /Lisec Type: Line Scanner + 2x RTV- 27- 25 Solution Model: Soft Solution Serial Number: AF1/2010/0252-03 Construction year: 2011 Weight: 0,5 tons Power: +/- 2A Length mm: 4360 (1,1+ 2x 1,6) Width mm: 1100 Height mm: 3400 Working height: ± 53 cm Transport size L x W x H: 4,36 x 2,5 x 2,0 Min.-max. glass thickness: 3-25mm Min.-max glass size: max 2500 Condition machine : As is Control type: Glas-IQ.com Electric. Connection: 230v Missing parts: Unknown Documentation: Request by infoglass-iq Instructions: Request by infoglass-iq Electric diagram: Yes Parts list: Number of spare parts Available software: Present Photos/film available: Photos and video available Part of the Lisec line, consisting of: Vertical washing machine (23014), Hand frame machine (23075), Tilting table (23076), Robot kit (23077), Cork pasting machine (23078), ...
used
Litz LT-400 CNC lathe Good condition, little wear, complete. 2011
used
X=2160mm y=1400mm z=750mm table can be loaded up to 6000 kg, Civfn22 Spindle: speed 6000 rpm, power: 22 kW, enclosure: SK50, tool magazine: 40 pieces The machines own weight is approx. 20 tons, Control Fanuc 21i-MD, with a 90 rotary head (manual) It can still be seen in action
used
LVD IMPULS 6020 laser cutting machine PULSE LVD 6020 laser cutter
used
web widht: 310 mm printing lenght: 300 mm printing widht: 310 mm connection value: 230 Volt Enables precise imprinting in prefabricated roll labels. - Flexo printing unit - Electronic infeed control - Longitudinal cutter (razor blade cut) - Job storage Web widht max.: 315 mm Printing lenght max. 300 mm Printing widht max.: 310 mm unwind and rewind Roll diameter max.: 400 mm Shafts diameter: 76 mm Longitudinal cutter, cutting width min.: 16 mm Output/Speed: 30 m / min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
web widht: 310 mm printing lenght: 300 mm printing widht: 310 mm connection value: 230 Volt Enables precise imprinting in prefabricated roll labels. - Flexo printing unit - UV-Drying - Electronic infeed control - Longitudinal cutter (razor blade cut) - Job storage Web widht max.: 315 mm Printing lenght max. 300 mm Printing widht max.: 310 mm unwind and rewind Roll diameter max.: 400 mm Shafts diameter: 76 mm Longitudinal cutter, cutting width min.: 16 mm Output/Speed: 30 m / min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
LNS Tryton 112 Year of construction: 2004 Hybrid drum: 7/ 12 channels
used
LVD IMPULS 6020 - 6 KW DOUBLE TABLE CONVEYOR BELT WITH A LENGTH OF 12 METERS DUST COLLECTING UNIT- DONALDSON
used
Langguth E 36 XPSP Labeler Labeler for self-adhesive labels, self-adhesive labels Dispensing via vacuum plate mobile on wheels Very good condition, straight from production!
used
OR Laser 200 Watt Laser Welding Machine Machine is in good working condition
used
Langhi OP 3000 label applicator, new, never used
used
Year of construction: 1993 Labeling machine Labeling of flat objects max. 5,000 cycles / h (idle) Label height approx. 40 x 315 mm Label length approx. 80 x 200 mm Semi-automatic Manual system Wet glue Box display Delivery date: immediately Price on request. We deliver and install worldwide!
used
Labelling machine P.E. Rollmatic for PET bottles Type: Rollmatic N540-12T 2.3.360 Year: 2009 Capacity: > 18.000 BPH Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around Label material: OPP with hot melt Machine drive: Siemens S7 Condition: machine in very good condition Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L Machine complete, already dismantled and available immediately Very interesting price
used
Long automatic loading system. With this system, products clamped in clamping devices are automatically transferred to the machining center. The machine is in very good condition. Includes 25 pieces of clamps. Currently coupled with a 5-axis machining center from Hermlle. Still to be seen under power. (Subject to prior sale)
new
Laser head: Raytools Autofocus Laser source: 3kW IPG Servo motor: Yaskawa System: FSCUT 5000 A CAD-CAM: Tubest, Tube Pro Pipe length: loading 6000mm, discharge 3000mm Tube diameter: 15-230mm Machine size: 12821x3726x2430mm
new
Laser source: 2/3/4kW Raycus Laser head: Raytools Autofocus Servo: DELTA/Matsushita/Yaskawa/Panasonic System: FSCUT 5000 A CAD - CAM: Tubest - Tube pro Pipe length: 6000mm loading, 4000mm discharge Tube diameter: 15-230mm Machine size: 13850x5100x2500mm
new
Fiber laser cutting machine 1500x3000 mm 12000W Raycus laser source High-performance machine base. High-performance servo motors. Intelligent cutting control system, easy operation; Fast start-up, supported by segment and steppiecing technology; Specialized air duct with oversized caliber, makes smoke exhaust smooth. Fully enclosed design; European CE standard laser protection. Two shuttle tables offer a high level of safety and comfort Technical Parameters: Working area 3000x1500 mm X-axis travel 1520 mm Y-axis travel 3020 mm Z-axis travel 300 mm X,Y positioning accuracy ±0.05 mm X,Y repeat positioning accuracy ±0.03. mm Acceleration 1.3 m/s² Max. Simultaneous positioning speed 120 m/min Table load 3000 kg Machine size 8100×2812×2640 mm Laser power 12000W Raycus FSCUT8000B control system Connected load 68 KW Voltage: 380V/50Hz Prices DPL-1530 H ...
new
Laser source: FEIBO 1.5/2/3kW Laser head: Raytools System: Raytools Cooling: HANLI SCH-YTJ
new
Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extraction: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm Tube length: 0-4000/0-6000mm Machine size: 13500x3400x2400mm
new
6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...
new
Laser source: Raycus 6/8/12 kW Laser head: Raytools autofocus Control system: FSCUT 5000 A Chuck: 20-350 mm Loading/unloading: 12000 mm X/Y axis positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotational speed: 60 rpm Max. positioning speed: 60 m/min Max. weight of one tube: 500kg
new
The DPL-6030/40/5 axis fiber laser system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as ovals Profilen.In the table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-6030/40/5 axes Laser shaft length 1070 nmLaser power 2000W IPG fiber laserConnected load 13.5 kWMax driven axes 4 - 7 ( 7 axis option )X./ Y axes Positioning accuracy ±0.08 X / Y axes Repeatability ±0.04 X / Y axes Travel speed 80 m/minMax, cutting speed 30 m/minMin. Cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 6 mm , Stainless steel: 5 mm Cutting material stainless steel, black steel St37 , titanium ...
new
Fiber laser tube cutting machine with table loading Cutting pipes using: Diameters from 16 to 220mm Length up to 6000mm Weight of 200kg 5-7 tubes per load, total load capacity up to 2000kg Min. goose waste 90mm Automatic loading and unloading system Cycle production and automatic feeding Laser power 2000 W
new
The DPL-7040/5 axis system enables fully automatic laser cutting of tubes with round, square and rectangular cross-sections, as well as oval profiles. The table lists the maximum values. The system is characterized by excellent productivity and precision, so that it does not even need to shy away from comparison with other specialized tube processing systems in this work area. Basic parameters (option according to customer requirements) Machines Type DPL-7040/5 axes Laser wavelength 1070 nm Laser power 2000W IPG fiber laser Connected load 13.5 kW , Max driven axes 5 ,X./ Y axis positioning accuracy ±0.08 X / Y axis repeatability ±0.04 X / Y axis travel speed 80 m/min Max, cutting speed 30 m/min Min. cutting width 0.02-0.08 Max. cutting thickness at 2000W Steel: 7 mm , Stainless steel: 6 mm cutting material stainless steel, black steel St37, titanium, aluminum and much more. Machin ...
new
Laser source: Raycus 3kW Laser head: Raytools autofocus Servo systems: Yaskawa System: FSCUT 5000 A Loading: Bundle loading Length: 7000mm loading, 5000mm unloading Chuck diameter: 15-230mm Unloading belt 1+3m, distance 3m Software: CAD Tubest, CAM Tube Pro Positioning of axes: ±0.05/1000mm Repeatability: ±0.03/1000mm Acceleration: 1m/s² Max. operating speed: 75 m/min Max. rotation of the feed: 100 rpm Max. weight: 120 kg Power requirement: 360V/50Hz ±10% Optional elements: Semi-automatic loading system Automatic loading system Bevel head Weld seam detection Conveyor belt unloading device Extension for unloading (+7000mm) Raybox (control with improved functionality)