l cd 9 used for sale

2023 Cimbria Dantoaster DTF 30/9000 with gas burner. The drum is performend in stainless steel Evaporative capacity kg/h 1500 Caloric consumption kW 1500 Drum motor kW 7.5kw Air consumption Notice that this drum never has been in use

liter capacity: 980 l Pressure of pump: 8 / 80 bar total power requirement: 16,7 kVA weight of the machine ca.: 1,1 t dimensions of the machine ca.: 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar total power requirement: - kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 1120 mm y-travel: 710 mm z-travel: 315 mm w-axis: 630 mm size of pallet: 1400 x 900 mm table load: 2 t number of T-slots: 9 Stück distance between columns: 1080 mm distance between table/spindle: 900 mm tool taper: SK 45 feed speeds: 16 - 500 mm/min rapid traverse: 10 m/min spindle motor: 5,5 kW spindle turning speed range: 28 - 1400 U/min max. torque on the spindle: 250 Nm total power requirement: 7 kW weight of the machine ca.: 7,5 t space requirements approx. LxWxH: - m DOUBLE COLUMN JIG BORING MACHINE - Hydraulic Unit - Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...

Koppens 900mm Preduster 900mm belt width With blower Stainless steel, on wheels

Manufacturer: Cognex Type: In-Sight 9912 IS9912M-373-50 (monocromn with RedLine) From stock liquidation Location: Stuttgart

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Manufacturer: ENGEL Model: VICTORY 940/200 Electric Year of Manufacture: 2007 Type of Machine: Injection Molding Machine Weight: 14,900 kg Tonnage : 200 SC Ø: 60 Operating hours: 98,485 Find more here - / Contact us at -

Working width: 900mm, max. workpiece height: 100mm, sanding units: 1, sanding belt dimensions X/Y: 2620mm/1150mm, feed speed: 2m/min-14m/min, compressed air requirement: 1800m³/h, operating pressure: 5bar-7bar, weight: approx. 1800kg. The feed belt is no longer grippy. Documentation available. On-site inspection is possible.

An Akon welding cell including Kuka robot and 2x Dinse welding sources is available. 1) Welding robot: Kuka KR 6 R900, payload: 6kg, reach: 900mm, control: KR C4 Compact, flange load: 25kg, total weight: approx. 170kg. 2) Automatic welding cell Akon Robotics with turntable and Kuka control system. 3) Welding power source Dinse Dix PI 900. The EP motor for the 4th axis was replaced in 2023. Documentation available. On-site inspection is possible.

POLYTYPE BDM 482/ 920 upto 8-Colors, only 6-Color-Heads mounted, Cup Printing Line, age 2014 Consisting of:-, Inclined Conveyor Feeder (acts also as an Accumulator), Servo Motor Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System with Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UV-Top (Leutkirch, Germany) VARIUS Powerjet BIF 1/ 815, 8 kW, UV Curing-On-Mandrel, 6 x individually hinged dry-offset Print Heads. (2 Extra Print Heads can be retrofitted), Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain with Ink Stirer., Ink Washing System on Print Heads, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter S ...

x-travel: 600 mm y-travel: 250 mm z-travel: 350 mm total power requirement: 5,5 kW Universal Production and Toolroom Milling Machine The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 900 mm gear width: 500 mm max. module: 1 min. module: 10 total power requirement: 16 kW weight of the machine ca.: 8.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 915 mm plate thickness: 1,0 mm distance between columns: 920 mm daylight opening: mm : 135 ° total power requirement: Handbetrieben weight of the machine ca.: 96 Kg dimensions of the machine ca.: 1170 x 400 x 480 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 1170 x 880 x 825 mm operating pressure: 2,5 - 8,0 bar dimensions: 1,33 x 1,24 x 1,77 m air consumption at 6 bar: 350 l/min weight of the machine ca.: 0,16 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2500 kg fork length: 950 mm stroke height: min 85, max 200 mm : 155 mm length in width: 540 mm number of wheels: 2 vorne, 2 hinten tire equipment: PU/Pu fork arm (length x width x thickness): 950 x 155 x 50 mm weight of the machine ca.: 0,059 t dimensions: 1,3 x 0,54 x 1,21 m SPECIAL PRICE ! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 900 mm : 900 mm : 900x900 mm saw band length: 9300 x 67 x 1,1 mm table height: 790 mm band speed: 14 - 60 m/min total power requirement: 11 kW weight of the machine ca.: 8,45 t dimensions: 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. ...

pressure: 80 t stroke: 400 mm table surface area: 920 x 540 mm Motor output: 2,2 kW liter capacity: 9,0 l dayligth: 800 mm tank capacity: 31 l daylight between the columns: 920 x 300 mm weight of the machine ca.: 0,725 t dimensions of the machine ca.: 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 707mm, working height inlet/outlet: 1220mm/1100mm, working temperature: 60°C, material: stainless steel, belt material: plastic, belt length and width bottom: 14000mm/820mm, belt length and width top: 8500mm/820mm, reducer power: 1.5kW, pump power: 2.2kW, additional bridge reducer power: 0.55kW, machine dimensions X/Y/Z: approx. 6750mm/1810mm/3500mm. Documentation available. On-site inspection is possible.

Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible.

Three identical screening machines with blowers are available. Working width: 700mm, foot spacing: 950mm, screen dimensions X/Y: 1450mm/700mm, vibrator power: 2x 0.65kW, machine dimensions X/Y/Z: approx. 2500mm/1050mm/2850mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible.

Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

x-travel: 700 mm y-travel: 370 mm z-travel: 350 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m Vertical milling machine Spindle ISO-40, Speed range 48-2100 1/min, feeds 10-1000 mm/min, rapid traverse Space requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes. Active digital readout Heidenhain TNC-114 Table clamping surface 1000 x 400 mm, Coolant device. Working area: 700 x 370 x 350 Drive: 4/5.5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature max.: 1150 ° muffle size (length): Ø 150 muffle size (width): Ø 150 muffle size (depth): 300 mm total power requirement: 3 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 0,8 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm conveyor belt GF 16950-900-750 RA2213 Technical data: Conveyor length (NL): 16950 mm frame width (NB): 900 mm, 1000 mm with motor belt width (GuB): 750 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor, R27 DRE80M4BE1/MM15/LN Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 16950 Nominal / outside width in mm: 900 Belt width in mm: 750 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 1,1/S1 Conveyor sp ...

Key data: 900 mm, 720 mm, 1160 mm

Drawer tool cabinet -Tiroclass 8 drawers height 95 mm Dimensions (L x W x H): 900 x 720 x 1160 mm Weight: approx 100 kg

9 heads Newtec

Age 2000, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens OP25 display with Touch-pad Controls.

Key data: 880 mm, 880 mm

Brand: Centauro M-No.: 2064 Year of Make: 1996 Motor 5.5 kW, with electro-pneumatic rem Table surface: 1,100800 mm Wiel diameter: 900mm Cutting height: 550 mm Band width: 850mm Belt length: 6,190 - 6,380 mm Band width: 30 - 50mm Tilt (table): 45° Table height: 960 mm Suction support: ø120 mm Machine dimensions: 925 KG Noise: 82.3 dB(A) Standard: CE

kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton

pressure capacity max.: 80 t Stroke: 500 mm table surface area: 960 x 810 mm spindle pitch: 72 daylight between the columns: 950 / 540 mm passage: 640 mm machine weight ab.: 4500 kg dimensions of the machine ca.: 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm 4 prism bases for straightening waves different support frames The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1x Crankshaft SBV9M628 with counterweights , Crankshaft with Counterweights ,Standard, Recon. for sale

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Manufacturer: SOFTAL Model: AT 9104.00 Year of Manufacture: 2024 Type of Machine : Corona surface treatment machine It has status of an unfinished machine, requires integration with other equipment Generator Type / Model: 9030 Order Number: A24–S–00074 Serial Number: 0903024061 Mains Voltage: 400 V Frequency: 50/60 Hz Power Consumption: 7 kVA Current: 10 A Find more here - / Contact us at -

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

SPECIFICATIONS: Table: 1000 x 1000 mm Flywheels: Ø 900 mm Saw blade length: 5985 mm Saw blade width: 108 mm Electronically adjustable saw blade guide Manual saw blade adjustment Installed power: 15 kW EQUIPMENT: 1 Resawing Saw (SAM meccanica SR/026) SPECIFICATIONS: Installed power: 0.37 kW Operating pressure: 5÷7 bar Roller: Ø 200 mm Roller height: 400 mm Max. opening angle - saw blade: 200 mm Max. opening roller - saw blade: 400 mm

Key data: 140 °C

Temperature control unit of the tools - Tool Temp TT-118K / MP-988 (3 pcs.) Year of Make: 2020 Location: Lodz, Poland Description: Max. heating capacity - 140°C Heat transfer medium - water Power: 29.3 Device has: - a vacuum pump - a vacuum chamber - a function to suck medium out of tools - The device can be integrated with the machine, unattended All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Vertical injection moulding machine Arburg 900 T 800/150 BJ 2001

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Transnorm belt conveyor GF 25000-1000-900 RA2416 Technical data: Conveyor length (NL): 25000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 25000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Tube filling and sealing machine for PE and laminate tubes, mechanical max. 60 tubes/min., built in 2000, D.35 and D.50 formats

KNOLL VRF 900/6000 Coolant system GENERAL Project No.: 905738 Quantity: 1 pcs. Manufacturer: KNOLL Type: VRF 900/6000 Year of Make: 2006 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION GENERAL TECHNICAL DATA Mains fuse 200 A Total power requirement 88 kVA Machine dimensions (LxWxH) approx. 3667x2338x4000 mm REMARK The system supplied three multi-spindle milling machines in one processing line. We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

Transnorm belt conveyor 985-600-500 RA2420 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a SEW gear motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: SEW Gear-drive Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 0,8 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1999 condition: good  ...