l cd 9 used for sale

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 980 mm -Width: 22 mm/height: 69 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 4.45 kg

Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 243/46/H46 mm -Weight: 0.8 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roller conveyor: not driven -Execution: difficult -Roll width: 940 mm -Roles: Ø 79 mm -Roll distance: 100 mm -Dimensions: 1670/1070/H280 mm -Weight: 206 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 900 mm -Recording: M 12 x 30 mm -Dimensions: Ø 60/975 mm -Weight: 3.3 kg/piece

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 5549 ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction  ...

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke travel: 150 mm -Piston rod: Ø 25 mm -Dimensions: 440/75/H75 mm -Weight: 5 kg

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction ...

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Martonair, pneumatic cylinder type SM/925 -Stroke: 250 mm -Piston rod: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/75/H75 mm -Total weight: 5.8 kg

High Pressure Centrifugal Fan, Pressure Blower, Ventilation Fan, Centrifugal Blower, Blower -Manufacturer: Bauknecht, ventilation fan -Type: P900 02 90S NF 1.1/2-5m -Power: 1.5kw -Speed: 2850 rpm -further data: not available -Dimensions: 360/355/H240 mm -Weight: 29kg

Dematic belt conveyor 9824-500/400 Dropping conveyor with Center drive Built in 2008 Length incl. task band: 9,824 mm Width: 500 mm Belt width: 400 mm Elbows + backward belt nubbed belt Habasit Belt conveyor straight length: 2,507 mm Bow piece 1: 632 mm Backward belt length: 5.851 mm Submission belt smooth belt length: 733 mm, with exaggerated rubberized drive drum Drive: SEW 400 V, 0.75 kW 2.1 A RPM 13000, number of drive shaft RPM 68 Speed v = 0, 35m / sec. and 21 m / min. If necessary optional: 5 units, high-demand support Features: Construction year: 2008 condition: very good (used) Conveying length in mm: 9827 Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Ampere: 2,10 Conveyor speed m / s: 0,35 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach m ...

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 75 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimensions: 201/30/H30 mm -Weight: 0.30 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 895 mm -Admission: M 12 x 32 mm -Dimensions: Ø 60/975 mm -Weight: 3.5 kg/piece

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, impact cylinder -Stroke: 250 mm -Piston diameter: 6 inch -Piston rod: Ø 38 mm -Dimensions: 167/167/H555 mm -Weight: 22.45 kg/piece

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -2 pillars: punching tool -Dimensions: 170/100/H130 mm -Weight: 5.3 kg

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

M. No.: LNDE002222 Ink Technology: Ultrachrome® Colours: Photo Black, Matte Black, Cyan, Vivid Magenta, Yellow Minimum Droplet Size: 3,5 pl Nozzle Configuration: 360 Nozzles Black, 360 Nozzles per Color Printing Resolution: 2.880 x 2.880 DPI Paper Formats: A0, A1, A2 (42.0x59.4cm), A3+, A3 (29.7x42.0 cm), A4 (21.0x29.7 cm), B1 (72.8x102.8 cm), B2 (51.4x72.8 cm), B3, B4, 17", 24", 44" Print Margins Sheet Media: Mode 1: 3 mm (top), 3 mm (right), 14 mm (bottom), 3 mm (left) Compatible Paper Thickness: 0,08 mm - 1,5 mm Duplex: No Equipment / additional information: with roll holder

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, telescopic rails, pull-out rails -Rail height: 61 mm -Length retracted: 516 mm -Length extended: 985 mm -Price: per pair (left right) -Number: 2x pairs available -Weight: 2.45 kg

Hydraulic pump, oil pump, gear pump -Shaft holder: Ø 18 mm -Length: 35 mm -Dimensions: 215/153/215 mm -Weight: 6.8 kg

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Roller diameter: 60 mm -Transport roller width: 995 mm -Square drive: 12/8/L10 mm -Price: per piece -Quantity: 28 pieces -Dimensions: Ø 60/1025 mm -Weight: 4 kg/piece

Welding fume filter, welding fume extraction, soldering fume extraction -Drive: 1.1 kW - Connection: 380V 50Hz - Flow rate: 700 m³/h -Max. Pressure: 1,600 Pa -Inlet diameter: 200mm -Outlet diameter: 250 mm -Number: 1 suction available -Dimensions: 1320/655/H1275 mm -Weight: 192 kg

TYPE = MODEL RS 4004 900/400/C Web width = 500 ÷ 950 mm Print width max. = 925 mm Printing cylinders with a surface width of 1000 mm can be installed. Raport = 500 - 1020 mm Max. mech. Speed 400 m/min 2 x Unwinder Auto Splice max. ø 1000 mm 1 x Rewinder Auto Splice max. ø 1300 mm Printing Rotogravure, series 4004 With trolleys 10 normal for axleless cylinders 2 norma and current printing units for cylinders with axes. Axisless printing units with three-phase drives Dryer : Thermal oil

Fully automatic erector for corrugated cardboard folding boxes Direction of travel from right to left Carton format range widt 160 - 460 mm, height 160-610 mm, length 210/300 - 510/600 mm Output max. 15 cartons/min, depending on the format Bottom sealing machine GT-B150-H20 for gluing with self-adhesive tape Manual format adjustment Drive 400V/50Hz

Key data: 451 KW, 1500 1/min

Year of manufacture 10/2020, engine in running condition and has only a slight leakage at the oil pan. A total of 11,000 operating hours.

width: 920 mm depth: 420 mm height: 1950 mm weight: 70 Kg Practical tool cabinet with 4 shelves Color RAL 6035 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

three-phase motor, electric motor -Manufacturer: Dietz, electric motor type DR 90L/4n -Power: 1.5 kW -Speed: 1720 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 325/240/H175 mm -Weight: 18 kg/pc.

centrifugal fan, dust extraction fan, fan, suction, dust blower -Motor power: 15 kW -Speed: 2925 rpm -Total pressure: Pg 33 m bar -Total pressure: Pst 30 m bar -Volume flow: 9660 m3/h -Inlet connection: O 400 mm -Outlet connection: O 400 mm -Dimensions: 1090/860/H1200 mm -Weight: 238 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Number: 55x Profibus plugs available -Price: per piece -Weight: 0.04 kg/piece

Workbench, work table, assembly bench -Width: 2000 mm -Depth: 950 mm -Height: 875 mm -Number: 1x drawers -with storage space for a tool trolley -Weight: 108 kg

Clamping plate, welding table, welding table, straightening plate -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Dimensions: 320/198/H220 mm -Weight: 12 kg

WEINIG Rondamat R 934 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment: Net cash register be ...

WEINIG Rondamat R 934 S/N 934-733, YOC 1996 Machine for manual profile knife grinding / regrinding profile knife Sharpening of straight knives in the planer head – according to a template Tool flight circle min. 100 mm / max. 300 mm Tool width max. 240 mm Grinding wheel diameter min. 150 mm / max. 225 mm Grinding wheel bore 60 mm Mandrel D=40 mm Grinding wheel width – ceramic 5 mm Borazon 10 mm Grinding wheel output 1.1 kW Spindle speed, infinitely variable 500 – 3,000 rpm. Clearance Angle – Radial (Back) 10 – 30 degrees Axial (lateral) 0 – 20 degrees Axial for planer heads 60 degrees Coolant tank approx. 50 litres Electrical connection approx. 1.5 KW Operating voltage 380 V / 50 Hz Machine complete with accessories Machine technically and optically in good condition – fully functional Packing: On pallet Payment ...

max. plate width: 55 cm stamp width: 220 mm serial no.: 10101/09 weight: 12 kg dimensions of press (L x W x H): 70 x 13 x 55 cm plate clamping system: Autoplate for QM 46 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 50 cm stamp width: 220 mm serial no.: 4184/20 Dimensions (L/W/H): 60x20x50 mm plate punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 00701 weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. plate width: 52 cm stamp width: 220 mm serial no.: 3851/15 Dimensions (L/W/H): 60x20x50 mm plate punch QM 46 or GTO The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Preamplifier, laser -Name: Preamplifier W979 -P0979-200-00002 -Number: 2x available -Price: per piece -Dimensions: 20/20/H60 mm -Weight: 40 g

stamp width: 425 mm serial no.: 6660/39 Dimensions (L,W): 71 x 55 cm plate punch for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1410 rpm -Shaft: 22 mm -Design: B5 -Protection class: - -Price: per piece -Quantity: 1 available -Dimensions: 320/200/H225 mm -Weight: 17 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -pneumatically operated -Year of manufacture: 1998