l cd 9 used for sale

Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998

Manufacturer: Purete, Type: 3 Lampen UV Trockner, Year: 2017, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 5-100, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 37, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2300, Lamps straight installation: yes, Adjustable: halblast, Chain pitch mm: 45, Feeding speed m/min: 5-20, Conveyor: Stange, Drive power kW: ca,1,0, Exhaust air diameter mm: 3 X 120, Year :2017

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Manufacturer: Lenze, Year: ca.1995, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, aus Maschine: Homag, IdN A: 5,5/8,9, Kw output: 7,5, Volt/Hz: 50, pm: 1450, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, Flange motor design: yes, FREE TEXT: mit Disco Verstellgetriebe 11.712.08.20, Year :ca.1995

Manufacturer: Explosion geschützte Leuchten, Type: Jung Leiuchten, FREETEXT1: 2 Stück , FREETEXT2: 32 cm breit 86 cm lang/Einbautiefe 13 cm, FREETEXT3: geeignet für Spritzraum,

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

Manufacturer: Ligmatech, Type: Stapelmat ZHK 10, Year: 1990, Control: Ligmatech, Work piece width min-max mm: 140-800, Min.-max. workpiece length in mm: 160-1200, Min.-max. workpiece height in mm: 10-60, Year :1990

Manufacturer: Ligmatech Korpussaufrichter, Type: MTK 10, Year: 1999, Control: yes, Corpus length max mm: 2200, Working hight mm: ca.500, Pneumatical: yes, Rollentransport: yes, Single machine: yes, Total lenght: 2500, Working hight adjustable mm: yes, Pneumatischer Korpussaufrichter, Year :1999

Manufacturer: Lackaufheizer EX Ausführung, Year: 2000, FREETEXT1: geeignet für 200 Liter Fässer, FREETEXT2: Heizung Elektrisch, FREETEXT3: fahrbar auf Rolle, FREETEXT4: Durchmesser 650 mm, FREETEXT5: Höhe 1000 mm, Year :2000

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Vertical stainless steel tank with various connections., Additional title: Vertical stainless steel tank, Capacity: 5000 l, Width: 1,45 m, Height: 3,8 m, Weight: 350 kg, Material: Stainless steel, Position: vertical

Manufacturer: Böllhoff, Type: 30281-Lackheizgerät, Year: 1993, FREITEXT1: Betriebsdruck 280 bar, FREITEXT2: Betriebstemperatur 90, FREITEXT3: Prüfdruck 384, FREITEXT4: Druckraumvolumen 0,92, FREITEXT5: Nennstrom 16 Ampere, FREITEXT6: Nennleistung 3 Kw, Year :1993

Overview  This centrifuge was manufactured in 2019 by Alfa Laval. The CLARABREW 2050 is designed for beer processing in beverage production. The machine is still installed and can be visited in production on request. It is available immediately. Technical data  Capacity: 80 HL/h – 150 HL/h Application: Beer Operating hours: 1,800 h

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Manufacturer: Lenze, Type: Leistungsverstärker, Modell: ERSM 2-4 200 Watt, Seriennummer: 4537112/ 0042, ID.Nummer: 00357574,

Manufacturer: Lenze, Type: Leistungsverstärker, Modell: ERBM 240 200W, Seriennummer: 45367112/0034, Produktionsnummer: 00357874,

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Manufacturer: Lenze, Type: Umrichter, Modell: 8200 Vector, Seriennummer: 0097, Produktionsnummer: 45382065, ID.Nummer: 00422974,

; Transport weight [kg]: 520

Manufacturer: Lange Kantenfräsgerät, Type: B 600, Year: 2009, Moulding spindles: 2, Routing: yes, Min.-max. workpiece length in mm: 8-60, Vorschub min- max m/min: Handvorschub, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : 1,5 mm, FREE TEXT: Fräsmotore Frequenzgeregelt, Year :2009

Manufacturer: Lenze, Type: EVF 8201-E, Modell: Umrichter, Seriennummer: 000696, Produktionsnummer: 45219668, ID.Nummer: 0384003,

Manufacturer: Lenze, Type: EVF 8201-E, Produktionsnummer: 45219668, Frequenzumrichter: yes, ID.Nummer: 00384003,

Manufacturer: Lenze, Type: EMB 8251-, Seriennummer: 0174, Produktionsnummer: 45173402, Bremsgerät: yes, ID.Nummer: 00387113, Power Input: 375 V/Imax 5,4 Ampere, Output Pav= Watt: 70, Output PpK= Kw: 2, geprüft: yes, Gebraucht: yes, Gewichtcht kg ca.: 0,5, Standort 32469 Petershagen: yes, Preis Stück Euro: 35, Preis zzgl. Versand: yes,

; Power [PS]: 300

Manufacturer: Lenze, Type: EVF 8201-E, Seriennummer: 000715, Produktionsnummer: 45219668, ID.Nummer: 00384003,

Manufacturer: IST, Type: Lignocure, Year: 1993, Number of lamps: 2, kW power 1 lamp: 80, kW power all lamps: 20, Adjustable: no, Position of lamps: gerade, Working widht mm: 1350, Stabteilung mm: 120, Conveyor length mm: 3500, Chain pitch mm: 120, Outer belt width mm: 1600, Working hight approx mm: 950, Feeding speed m/min: 5-20, Drive power kW: 0.75, Year :1993

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machine in top condition, equipped with loading unit, many accessories. This machine is equipped with manual deburring function with a cutting wheel, no chamfering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.