l cd 9 used for sale

Gear motor, electric motor, electric gear motor -Speed: 75 rpm -Motor: Loher type AL 90LA-4 -Power: 1.5 kW -Protection class: IP44 -Construction: B14 -Diameter hollow shaft: 40 x 120 mm -Dimensions: 540/200/H280 mm -Weight: 41 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

Motor spindle, milling spindle, motor spindle, AC spindle motor, electric motor, DC motor, servo motor, milling motor -Machining: milling/drilling -Motor spindle: was tested on a robot -Operating hours: 4350 h -Motor spindle: 55 kW -Servo converter: Lenze Servo Drives 9400 -Admission: HSK32 -hydraulic tool clamping OTT type: 95.102.779.0.2 V01 -Spindle cooling BKW type: WRK07/PC41 -Control cable -Dimensions control cabinet: 1118/800/H2430 mm -Weight: 694 kg

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Type: 9210 33.9212 E.4F -Input: 460 V 50/60 Hz -Output 620 V 7 A -Dimensions: 440/125/H310 mm -Weight: 7 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: 9114 B -Input: 3-phase 220 V 50/60 Hz -Output: 3-phase 0-120 V 4.2/10.7 A -Dimensions: 345/115/H300 mm -Weight: 6 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 64 rpm -Power: 1.5kw -Construction: B5 angle -Hollow shaft: Ø 40 mm -Protection class: IP 55 -Number: 1 piece available -Dimensions: 565/203/H280 mm -Weight: 53kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1380 rpm -Shaft diameter: 24 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 300/240/H180 mm -Weight: 19.8 kg

Gear motor, electric motor -Gearbox Lenze type: 12.623.12.3 80S/4-H-TH -Motor Lenze type: 8D4-998H -Speed: 10 rpm -Power: 0.55 kW -Construction: B14 -Shaft diameter: Ø 30 mm -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 525/150/H280 mm -Weight: 23 kg

Servo drive, servo converter, output module, card, input processor, power supply unit, control card, input card, controller -Manufacturer: Lenze -Type: 9114 B -ART.-No.: 331073 -Servo drive -Number: 2x control cards available -Price: per piece -Dimensions: 350/120/H300 mm -Weight: 6 kg

Lippert conveyor roller curve 90° 980-900 IR900 RA2114 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 900 mm Nominal/outer width (NB): 980 mm roller width (NUB): 900 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor, R40DT71D4BM Engine power: kW 0.37 S1 Hz 50 Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 980 Roll width in mm: 900 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfac ...

LACHNER DGA 900 TOP DIGITAL with digital display Battery operated (6x Mignon 1.5V) Resolution: 0.1 degrees 2 stop flaps 1 stop extension Universal fastening system Fits almost any sliding table saw Instruction manual available

CALIBRATING machine model LEVIGALTECNICA RNC 900 second hand machine carpet in rubber max. working width mm. 900 machine composed by 1 unit : 1 belt : roller in rubber diam.mm.300 shore 80 . motor Hp 15 belts size mm. 1900 x 930 weight kgs.1500 volt. 380/50

General SKU308U650 LocationBarneveld MakeLFC Lochem bv TypeMVDCD 900/1000/13.5/11 No.P9501/0480C Year of construction1996 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface13.5 m2 Cake330 Ltr. Specified Features - Horizontal plate filter Plate filterVertical pressureleaffilter Notified bodyTÜV Filter surface13,5m2 Number of platens11 Between the plates70mm Solids outletdia.350mm With jacket(20 ltr) Max. temperature10-160°C Cake capacity0,33m3 MaterialStainless steel 1.4404 (316L) Information Total height2,8 M Weight1000kg Floorspace1,5x1,2 M Extra Specifications- with knocker Horizontal plate filtersLFC LochemFilters > Horizontal plate filtersBrand > LFC Lochem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

General SKU212U086 LocationBarneveld MakeAlfa Laval Type3H-C-1T No.21965 Year of construction2002 Pressure Vacuum possiblecheck Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface98 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 Heat exchangerspiral Horizontalcheck Heating surface98 m² Tube capacity705 Ltr. Number of tubes:1 Wall thickness tubes2 mm Max. temperature0/100 °C Shell capacity1255 Ltr. Wall thickness shell2 mm Max. temperature0/100 °C Shell connectionsDN250, DN100 Cover connectionsDN100 (2x) Capacity830.8 kW Information Mounted on legscheck Weight4100 kg CEcheck Floorspace1,85x1,3 m Total height1,85 mShell and tube heat exchangersAlfa LavalHeat exchangers ...

Lippert belt conveyor GF 900-750-600 RA2252 Technical data: Conveyor length (NL): 900 mm Frame width (NB): approx. 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 900 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in  ...

Lippert belt conveyor GF 1035-750-600 RA2260 Technical data: Conveyor length (NL): 1035 mm Frame width (NB): approx. 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, S37 DRS71S4/TH/Z Electrical data: 50Hz V380-500, kW 0.37 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used) Conveying length in mm: 1035 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sic ...

Lippert belt conveyor GF 5200-750-600 RA2262 Technical data: Conveyor length (NL): 5200 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 5200 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m /  ...

Lippert rising falling Incline belt conveyor GF 19250+9300-750-600 RA2265 Technical data: Conveyor length (NL): 28550 mm ( 9300 mm ascending belt + 19250 mm top bend ) frame width (NB): 750 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 105 mm, 430 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 28550 ( 19250 + 9300 ) Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: Y ...

Lippert belt conveyor GF 5500-900-700 RA2267 Technical data: Conveyor length (NL): 5500 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 5500 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,5 ...

Lippert belt conveyor GF 22300-900-700 RA2266 Technical data: Conveyor length (NL): 22300 mm frame width (NB): 900 mm belt width (GuB): 700 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,575 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 22300 Nominal / outside width in mm: 900 Belt width in mm: 700 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: ...

Lippert belt conveyor GF 9650-750-600 RA2270 Technical data: Conveyor length (NL): 9650 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R37 DRE80M4/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2015 condition: good (used) Conveying length in mm: 9650 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Span ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

degree: 1200 length: 2250 mm width: 1450 mm depth: 2000 mm pan capacity: 320 Kg / Al capacity: 840 u/F total power requirement: 102 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m NEW GOODS with manufacturer guarantee ORIGINAL PACKAGED Melting electric tilting furnace PTS 970 /12 Technical parameters Mark: PTS 970/12 Max. temperature: 1200 °C Recommended range of operating temperatures: 650-1000 °C (in crucible) Capacity: 840 kg of Al Crucible type Noltina or equivalent: TBNS 800 Capacity of crucible: 320 l External dimensions (w x h x d): 2250 x 2450 x 2000 mm Melting output: 250 kg of Al alloys/h Heating power input: 102 kW Weight: 3500 kg Protection: 200/3 Voltage: 3/N/PE 400/230 V AC 50 Hz Protection can vary depending on the accessories chosen (at additional cost). The melting output values specified in the table are the maximum values. They are achievable if  ...

fully hydraulic wheeled excavator Liebherr 912, built in 1986 4 times twin tyres. 70 KW 6 cylinder Deutz engine. Rideable on the road. Additional hydraulic connections for chisels. Device is operational. Equipment : trench bucket, bowl gripper, 3 normal spoons in different widths. Total weight 18 tons (can be driven on a low-loader)

Cutting force: 900 t., Cutting width: 940 mm, Max cutting stroke: 600 mm, Cutting length variable, Cutting strokes per min. approx. 4, Pressure material clamping cylinder: 180 t., Pressing force press cover cylinders: 2 x 350 t, Pressure force supply cylinder: 120 t., Press box dimensions, opened: 7000 x 2400 mm., Press box dimensions, closed: 7000 x 940 x 600 mm, Cutting capacity square: 110 mm (e.g. with normal, steel 37 kg/mm²), round 120 mm plate 70 x 700 mm, Production capacity approx. 20 tons/hour,, depending on the type of scrap, cutting length and the load on the machine., Drive power: 1x diesel engine, Scania DC16 500 HP., Pumps High-pressure axial piston pumps with self-regulating flow. Manufacturer Bosch-Rexroth., Year of manufacture: 2012, Weight of the machine approx.: 75,000 KG, Cutting force: 900 tons., Cutting width: 940 mm, Max cutting stroke: 600 mm, Pressure material  ...

Adhesive label printer and dispenser, make Logopak, type 920 III TE, year 2012, Logopak - Type 920 III TE, year 2012 for printing and applying labels on packaging and pallets,, for labels up to 210 mm wide,, Labeling using a pressure brush on the stamp across the corner,, with shutters,, Label roll diameter: 400 mm, 76 mm core (150 mm adapter),, Cycle speed: 15 labels/min. (standstill labeling).

weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 320 x 350 x 250 mm

Panning Unit Lippelt ABLI 580/980 Suitable for trays or boards Working width 580 cm Panning length max. 980 cm Adjustable panning length With separate control Belt speed adjustable Fast or slow panning possible Machine mobile with brakes Optionally with head machine or seeding unit

Alfa Laval Oil Seperator MAB 205

Alfa Laval MMB 305 Skid

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: A used railway locomotive Built for sale, perhaps also for rent. Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty; ...

Ladies and gentlemen, Below you will submit a non-binding offer for a foundry plant: 1 piece br. Endogas production plant, make LOI natural gas-heated, with modern measuring/control and control system and modern KROMSCHRÖDER torches, solid top fittings, compressors with separate mounted shaft and separate motor, 100 Nm3/h in 3-stage version, power min. 35 Nm3/h The power can be reduced to 40 Nm3/h. The operation of the system can also be carried out in a 1-stage manner, so that the power can be reduced accordingly. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are ap ...

Piston pump for dosing, type EK 1 H, with batch-control by electric impulse batching counter. Working pressure 7,5 bar, dosing stream 290 l./h max., hose coupling Rd 34 x 1/8 inch with hose tail NW 15, with switchgear, mounted on table.

Piston dosing pump, type EK 1 H, with batch control via electric pulse preselection counter incl. remote summier movement. Working pressure 7.5 bar, max dosing current 290 l./h, pipe connection Rd 34 x 1/8 inch with hose sleeve NW 15, with control cabinet, mounted on table.

Ladies and gentlemen, We allow ourselves, on the basis of our general terms and conditions below: Offer warehouse: The mass of the hall are: Snow load 75 Kg . The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices; The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical  ...

Alfa-Laval,New Plate Heat Exchanger Niro-Inox. Type A 15-BWFDR-1.730KW,with 189 plates,141m2, compact. Type MK 15-BWFDR 1.526KW,with 282 plates,128,8m2 Type MK 15-BWFDR,1.730KW,with 150 plates,68,1m2.

On behalf of you, we can offer you: A Location Storage area 10,000 m2 up to 15 meters high With shelf stock All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expr ...

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

Motor Lombardini LDW903,Deutz-Type=F3M1008 general-overhauled engine in off-exchange Email=info@miw-zeven.de

Laska cutter 60 liters Completely stainless steel Bowl in stainless steel Knife shaft infinitely variable speed control With digital display With stainless steel control cabinet Machine without ejector With noise protection cover

Deutz engine in replacement type=BF4M1008 Turbo refurbished Lombardini Type= LDW120T Turbo Price only on request email=info@miw-zeven.de

We have a laser for sale, wery little used. Manufactured year 2000 and complete with documentation. Editec AB

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Altas Motoren im Austausch sofort ab Lager verfügbar. Motoren-Typen:BF4M1013E,BF4L1011T,BF4M1008(LDW1204T),F4M1008(=LDW1204) ,F3M1008(LDW903) BF4M2011,BF4M2012C/BF4-6M2013/C Hatz-Motoren:alle Typen ab Lager lieferbar:ES75/79/780/785/786/1D80/1D81 ansonsten schnelle und günstige Motor-Überholung mit 1 Jahr Garantie info@miw-zeven.de

Facade scaffolding system Layher Blitz 70 and Compatible Large used item and compatible new material in stock BOM on request

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Centrimax - Winkelhorst Trenntechnik GmbH is specified for over 30 years on the delivery by used separators of the brands Westfalia separator and Alfa Laval. The separators are fully reconditioned by us and are delivered with warranty. Disc stack separators (selfcleaning separators, solid wall separators and nozzle separators) as well as chamber separators, for the purification and the separation of suspension and liquid mixtures count to our big stock of several hundred separators. Ask us if you search consultation in the solution of problems in the area of the centrifugal dividing technology. Shop with the specialist!

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !