l cd 5 used for sale

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.18 kW -Speed range: 81-485 rpm -Motor: adjustable -Drive shaft: Ø 14 mm -Construction: B3 -Number: 1 piece of motors available -Price: per piece -Dimensions: 365/200/H190 mm -Weight: 19 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

Connector, plug, sensor module, G2 flat module -Manufacturer: Lumberg -Type: 0976 PFC 101 -Number: 10x plugs available -Price: per piece -Weight: 0.06 kg

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool: 88° -Edge length: 100 mm -Overall height: 149 mm -Weight: 3 kg

Geared motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 109 rpm -Shaft: Ø 25 mm -Design: B3 angle -Protection class: IP 55 -Quantity: 1x motor available -Dimensions: 490/230/H170 mm -Weight: 22.6 kg

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: EX -Number: 3x available -Price: per piece -Dimensions: 470/360/H300 mm -Weight: 75 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Max. speed: 3000 rpm -Torque: 1.9 Nm -Power: 0.6 kW -Shaft: Ø 19 mm -Design: B5 -with NIKKI-DENSO-Encoder-E2-1-2000-PR -Number: 5x stepper motors available -Price: per piece -Dimensions: 290/120/H180 mm -Weight: 11.4 kg

Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.

electric motor, three-phase motor -Engine: is unused -Power: 55 kW -Speed: 2950 rpm -Shaft: Ø 60 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 860/680/H550 mm -Weight: 366 kg

Three-phase motor, electric motor, geared motor -Power: 3kW -Speed: 950 rpm -Shaft: Ø 28 mm -Construction: B3 -Number: 1x available -Dimensions: 460/260/H335 mm -Weight: 42.8 kg

Sensor module, G2 flat module -Manufacturer: Lumberg -Type: ASBS 8/LED 5-4 -Number: 3x available -Price: per piece -Weight: 0.26 kg

Servo drive, servo converter, output module, card, input processor, power supply unit, control card, input card, controller -Manufacturer: Lenze -Type: 9114 B -ART.-No.: 331073 -Servo drive -Number: 2x control cards available -Price: per piece -Dimensions: 350/120/H300 mm -Weight: 6 kg

Gear motor, electric motor -Speed: 75 rpm -Power: 0.75 kW -Construction: B3 angle -Diameter shaft: 12 mm -Protection class: IP 65 -Dimensions: 250/160/H120 mm -Weight: 4.75 kg

Filter control valve, switch-on valve, maintenance unit, water separator -Connection: 1/4 -Number: 5 pieces available -Price: per piece -Dimensions: 80/80/H190 mm -Weight: 0.7 kg

Gear motor, electric motor -Speed: 194 rpm -Power: 0.75 kW -Construction: B3 -Diameter hollow shaft: Ø 24 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 430/150/H200 mm -Weight: 15 kg

Electric motor, three-phase motor with 2 speeds -Power: 1.6/5.5 kW -Speed: 1445/2880 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: -pole changing -Number: 1x available -Price: per piece -Dimensions: 410/350/H300 mm -Weight: 48 kg

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Three-phase motor, electric motor with 2 speeds -Power: 1.25/4.2 kW -Speed: 970/1460 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -pole changing -Dimensions: 440/350/H265 mm -Weight: 62 kg

Pressure control valve, pressure control directional control valves -Manufacturer: Festo -Type: MS4-LRB-1/4-D6-A8-AS -Operating pressure: 0-10 bar -Number: 1x valves available -Price: per piece -Dimensions: 130/60/H40 mm -Weight: 0.22 kg

Electric motor, three-phase motor -Power: 15 kW -Speed: 1430 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: - -Dimensions: 650/450/H360 mm -Weight: 158 kg

Bending tool, die, lower knife, lower tool, lower beam, -Tool: for folding machine -Widening: for lower cheek -Dimensions: 33/76/3040 mm -Bore distance: 280 mm -Hole diameter: 18 mm -Length: 3040 mm -Weight: 33 kg

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Feed: -Speeds: 3000, 4500, 6000, 9000 rpm -Dimensions: 1400/800/H1480 mm -Weight: 600 kg

Three-phase motor, electric motor -Power: 45 kW -Speed: 2965 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: - -Dimensions: 810/550/H440 mm -Weight: 340 kg

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Soundproof Diesel Generator Set Emergency Generator Set Manufacturer: Lucla Type GLU-33-SK Specifications Continuous power: 30 kVA Standby power: 33 kVA Mains voltage: 400/230 V Amperage: 43.3 A Max. sound level: dB(7m) =78 Engine: KOFO Model: K4100D Intake system: naturally aspirated engine Fuel Injection System: Eddy Number of cylinders: 4 Displacement: 3,613 L Bore x stroke: 100x115 mm Compression Ratio: 20:1 Nominal speed: 1500 r/min Engine power: 33 kW Controller: Mechanical Starting voltage: 12 V Generator: Lucla Model: LU 184GS Phase: 3 Voltage: 400 V / 230V 43.3A Line type: 3 phase 12 cable, Y type Stock: 1 Power factor (cos f): 0.8 Frequency: 50 Hz Continuous power: 30 kVA / 24KW Arousal Type: Brushless, Self-Arousal Voltage Regulation: % ±0.5 Protection class: IP 23 Degree of insulation: H Altitude(above sea level): m =1000 Controller: ...

Mecatherm Bun/Baguette Line Manufacturer: Diosna, Mecatherm Year: 2001 Capacity: 300 trays per hour Output approx. 22500 rolls 60-65 grams Location: Germany No longer in production, still installed Composed of: Diosna DSP280E, Double Spiral Mixer, Floor Emptying Trolley under the blender Diosna Lifting Tipper Hopper with left/right separator belt with pre-portioning 2 Mecatherm weiighers 2 Mecatherm Block Line Tray size 800 x 1600 mm Shelf on 800 mm side Tray Merge Conveyor Tablet Turning Station SSL -> LSL Proofer, 7 modules, spacing 120 mm Scoring unit with knives Oven, 3 modules, spacing 150 mm, gas-fired, 6 Weishaupt burners Ambient cooler, 2 modules, pitch 150 mm Freezer, 4 modules, spacing 150 mm, evaporator for NH3 Despice Depanner Up and down buffer station Tray return conveyor Includes 1 set of flat trays Electrical: 3 x 400 V – 50 Hz

Three-phase motor with 2 speeds, electric motor -Power: 1.7/7 kW -Speed: 720/1450 rpm -Shaft: Ø 38 mm -Construction: B3 -pole changing -Protection class: - -Dimensions: 480/330/H270 mm -Weight: 74 kg

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg

Key data: 1050 mm, 510 mm, 560 mm

Inv. Num. : 5759 Type: SVM 105 Producer: LILIAN Created: 2013 Parameters: Control System: Fanuc Oi-MC Operating hours: 23000 h Spindle hours: 5081 h Work table length: 1200 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Tool magazine: 32 pieces Speed: 60-8000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 560 cm Cone: BT40 Max. tool weight: 6 kg Main motor power: 11/15 kW Machine height: 2558 mm Machine length: 3050 mm Machine width: 2319 mm Machine weight: 5200 kg Equipment: Conveyor IKZ

Gear motor electric motor -Speed: 200 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 32 mm -Protection class: -Price: per piece -Number: 2x available -Weight: 38 kg

• Color filling control for detection of under-mixing, size, position, fragments and overfilling • Adjustable illumination • Max. width of blister web 320 mm • Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules • Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill • 21 CFR Part 11 compliant. • Format versions are stored separately • Suitable for Uhlmann blister machines, as equipped with Uhlmann rail system • All system units installed in one box • Update to latest version possible by manufacturer Scanware

LEOMAT J 400 – Slitter  Leomat J 400  YEAR 2004  Rewinder: 1  Rewinder: max.800mm  Unwinder max:550mm  Spindle unwind and rewind: 76mm laminator on rail Availability: immediately Sale Reason: Purchase of a new wider Converting machine

MIG/MAG hose package, -Hose package: for robots, welding device -Length: 3 m -Euro plug -Water cooled -Weight: 3.7 kg -Price: per piece -Number: 1x available -Weight: 4 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 1375 rpm -Shaft: Ø 11 mm -Construction: B3 -Protection class: IP 54 -Price: per piece -Number: 4x available -Dimensions: 210/122/H190 mm -Weight: 4.25 kg

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Leadermac 823 Hypermac four-sided planer Working width 230mm Working height 160mm Number of spindles: 8 Spindle system: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left7.5kw 4.Top7.5kw 5.Right 7.5kw 6.Left7.5kw 7.Top11kw 8.Bottom 11kw Feed speed 50m/min Pulling rollers in the table Upper and lower spindles with supports Pneumatic clamps