129,512 used machines on RESALE, but how to find them? Machine Search
Electrode welding Manufacturer ESAB Type LHK350 Power 350 amps at 35% ED, 200 amps at 100% ED Power connection 400 Volt 20 Ampere Weight approx. 150kg Machine ready for demonstration under power. Shipping on Euro pallet possible.
We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...
For sale second hand line for cutting top layers from planks. Cutting from 1,5-6,0mm all soft and hard wood.
Note: The IBCs were filled with an acid for feed (main ingredient formic acid). Is not dangerous goods according to ADR, but subject to identification according to Hazardous Substances VO. The containers are empty, but not cleaned. The scope of delivery includes: 01x Water tank, used Total width: approx. 1,000 mm Total depth: approx. 1,200 mm Total height: approx. 1,160 mm Capacity: 1,000 litres incl. tap on metal, wooden or plastic pallet Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm
Key data: 5600 kg, 810 mm
Fully Automated Forging Hammer Line (2009) LASCO HO-U 800 (80 KJ) The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Induction heating unit, ABP, EBS 345-W, 2009 Quick-release conveyor Automation unit, Lasco, 2009 2 Forging robots, Kuka KR 30-3F, 2013 2 Bases, weight each: 336 kg Conveyor belt with lifting device, safety enclosure with doors Top pressure drop forging hammer, Lasco, HO-U 800, 2009 Picking robot, Kuka, KR 150/2, 1998 Dispensing station, consisting of: Discharge conveyor and blow-off control, Manufacturer Schramm Technical Details (2009) Short-Stroke Die Forging Hammer LASCO H-OU 800 Machine identification data Name: Short-Stroke Die Forging Hammer Model: HO-U 800 Machine number: 00.08175 Year of manufacture: 2009 Operational parameters Working capacity max. 80 ...
Following separator available for sale. Make: ALFA LAVAL Type: WHPX 505 TGD 24-60 Serial Number: 2993137 RPM: 1700-1800 r/m ,142-150 Product No.: 881002 Machine Topper No.: 537245-80 Bowl No.: 537170-80 Machine Bottom part: 540224-04 MOTOR Make: Made in Italy No.: 17019 19Z Volt: 440 HZ: 60 KW: 4.2 RPM: 1720
LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...
HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, ...
Label book printing machine Iwasaki, machine number 1499, 3 colors, 2 colors, punching unit, embossing unit, various mounting plates, laminator, UV dryer, dispenser, slitter rewinder, in good condition, immediately available
1992 LECTRA VT5000 in Germany Our LECTRA VT5000 is from 1992. It was fully updated 2004 and we bought it 2013. We have also the CAD pattern and layout programs as well the digitable.
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Total length: 1,800 mm Total width incl. motor: : 950 mm Total width without motor: : 800 mm Belt width: 680 mm Belt type: smooth/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition, ...
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: VanderLande Year of construction: 2008 Total length: 900 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Belt type: Steering grooves and Smooth Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in fr ...
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: VanderLande Year of construction: 2008 Total length: 900 mm Total width incl. motor: : 850 mm Belt width: 600 mm Belt type: Steering grooves Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and processing mac ...
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,800 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Belt type: Steering grooves Frame height: 170 mm 9 pieces with 1.1 Kw motor 1 piece with 0.75 kw motor Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also ...
Available in stock 1 x Used Capstone IGBT LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,500 mm Total width incl. motor: : 1.170 mm Total width without motor: : 1,000 mm Belt width: 900 mm Belt type: smooth/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...
properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,950 mm Total width incl. motor: : 870 mm Total width without motor: : 700 mm Belt width: 600 mm Belt type: smooth/ green Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or b ...
properties: Used belt conveyor Color: light gray Incl. SEW engine 0,75Kw Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 2,100 mm Belt width: 400 mm Belt type: steering grooves/ black Frame height: 170 mm Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loading or delivery point and also serves, for example, as a connecting line in front of or between production and processing machines. In addition, it enab ...
3,85 LF WIDE SPAN RACKS 60CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 60 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 60 cm, disassembled. 16 x traverse approx. 185 cm. 08 x Contact back approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 425,00 € net plus legally valid VAT You will receive an invoice with VAT.
Product number: 2462B Type: KB428 Serial number: C722 Block size: max 530 x 530 mm Power: 3 x 380V, 50Hz, 22kW Dimensions:950 x 1450 x 1900 mm 1 speed on cutting drum Product bottom exit in 200 litre tote bins
57 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 57 running metres Shelf offer consisting of: 031 x frame approx. 200 x 80 cm , disassembled. 240 x traverse approx. 185 cm. 120 x support shelf approx. 184.5 x 79.5 cm. 240 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 7267,00 € net plus legally valid VAT You will receive an invoice ...
Used Kuba CAV L08-2x4C condenser. Complete with 8 fans - 50 Hz - 0,9/1,2 kW - 620/720 RPM - Diameter 800 mm and a total airflow of 143.040 m³/h. No. 13476 Brand Kuba Type CAV L08-2x4C Product type Air Cooled Condensor kW 587,3 (Freon) Number of Fans 8 RPM of the Fans 620/720 Air Flow in m³/h 143.040 diameter fans Ø 800 mm Surface (m2) 1.778 Tube volume 288 dm³ Sizes 8600x2370x2100 mm (LxWxH) Weight 2100 kg Remarks | Y.o.b. 2003 Amount in stock 1
13,35 LF WIDE SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 13,35 m Shelf offer consisting of: 08 x frame approx. 200 x 80 cm, disassembled. 56 x traverse approx. 185 cm. 28 x support shelf approx. 184.5 x 79.5 cm. 56 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1724,00 € net plus legally valid VAT You will receive an invoice with VAT.
9,55 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 9,55 m Shelf offer consisting of: 06 x frame approx. 200 x 80 cm, disassembled. 40 x traverse approx. 185 cm. 20 x support shelf approx. 184.5 x 79.5 cm. 40 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1242,00 € net plus legally valid VAT You will receive an invoice with VAT.
7,65 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 7,65 m Shelf offer consisting of: 05 x frame approx. 200 x 80 cm, disassembled. 32 x traverse approx. 185 cm. 16 x support shelf approx. 184.5 x 79.5 cm. 32 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1001,00 € net plus legally valid VAT You will receive an invoice with VAT.
5,75 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 5,75 m Shelf offer consisting of: 04 x frame approx. 200 x 80 cm , disassembled. 24 x traverse approx. 185 cm. 12 x support shelf approx. 184.5 x 79.5 cm. 24 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 709,00 € net plus legally valid VAT You will receive an invoice with VAT.
3,85 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 80 cm, disassembled. 16 x traverse approx. 185 cm. 08 x support shelf approx. 184.5 x 79.5 cm. 16 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 519,00 € net plus legally valid VAT You will receive an invoice with VAT.
1,95 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 1.95 running metres Shelf offer consisting of: 02 x frame approx. 200 x 80 cm, disassembled. 08 x Traverse approx. 185 cm. 04 x Contact back approx. 184.5 x 79.5 cm. 08 x beam / load distributor Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 278,00 € net plus legally valid VAT You will receive an invoice ...
Used and in very good condition Alfa Laval BCD E905BD P SW CBP air cooled condensor. Complete with 10 fans from Ziehl-Abegg designed for 60ºC, 50/60 Hz - 0,68 kW - 570 RPM - diameter Ø 910 mm. Capacity at delta 598,8 kW and 169.200 m³/h. Capacity at Y 519,5 kW and 135.400 m³/h. Specifications: Our internal stock No. 12244 Brand Alfa Laval Type BCD E905BD P SW CBP Product type Air Cooled Condensor kW 598,8 (Freon) Number of Fans 10 RPM of the Fans 570 Air Flow in m³/h 169.200 diameter fans Ø 910 mm Surface (m2) 2.286 Tube volume 200,5 dm³ Sizes 9230x2300x1400 mm Weight 1.662 kg Remarks | y.o.b. 2016 Amount in stock 1
New glass depalletizer KHS type: Innopal Lord II ASN year of manufacturing: 2000 capacity. 30.000 bph with Siemens S 7 electric, incl. pallet transport and pallet magazine incl. sheet layer removal system The machine is depalletizing the empty bottles on a height at approx. 1.150 mm.
Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.
weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date
Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.
voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5
bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...
Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel
Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg
Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0
Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz
maximum number of results exceeded
please refine your search
