l cd 5 used for sale

The Godwin Dri-Prime CD103M pump is an extremely powerful yet compact pump with a flow rate of up to 230m3 per hour litres. lift heights of up to 52 metres., The CD103M is equipped with the unique Godwin high-pressure oil, bath mechanical seal. This allows the pump, run dry for longer periods while it automatically, refill. The CD103M is capable of operating under the harshest conditions., CD103M handles solids up to 75 mm in diameter. This, This makes it a highly effective pump, suitable for both, slurry and clean water applications. The powerful CD103M, has proven itself as the pump of choice for contractors, local, governments, industrial and environmental companies., , Throughput capacity: 232 m3/h, Max dirt passage: 75 mm, Motor brand: PERKINS 404D-22T 36.4 KW @ 2500RPM, Max. head: 52 MWK, , = More information =, , Year of manufacture: 2017, Empty weight: 1.500 kg, Connector size: 4 ...

SPECIFICATIONS: Installed power: 1 kW Maximum pressure: 14 bar Ambient temperature: max. 43 C Refrigerant: R410A

2012 Envair CDC F 2G2D & 2012 REUKO Isolator and cleanroom Last filter change and last maintenance were on 09.01.2014 (see test report in the appendix) The air handling unit is designed for a room size of approx. 12 m2 (file room 3.46 in the appendix). The isolator has the complete documentation incl. test reports. It has been used very little (see current operating hours below) and is connected to an air handling unit (designed for approx. 12 m2). These are the technical parameters: REUKO climate service ENVAIR Isolator (Cytostatic isolator (CMR) 1.2m) a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, For the processing of: - Cytostatics - antivirals -hazardo ...

Sand Drainage Manufacturer: CDE Type: Hydrocyclone Year of Make: 2021 Operating hours 428 h Drive: Electric Location: NRW Price from location:

weight of the machine ca.:4 t

Die-sinking EDM BF 1200 ZENIT+ :::TECHNICAL SPECIFICATIONS::: X-axis travel: 1200mm Y-axis travel: 600mm Z-axis travel: 500mm Max piece weight: 250Kg C-axis: yes Number of electrodes: 6 Bowl dimensions: 1880 x 1073 x 565mm :::D DIMENSIONS AND WEIGHT::: Length: 2850mm Width: 2800mm Height: 2730mm Weight: 5500Kg

A Drinns flywheel eccentric punching machine is available. Pressing force: 250kN, ram table distance: 230mm, stroke adjustment: 10mm-65mm, number of strokes: 145 strokes/min, flywheel speed: 145rpm, max. tool weight: 190kg, machine weight: approx. 2250kg. Documentation available. On-site inspection is possible.

VERTICAL COOKER WITH PNEUMATIC OPENING, IN WATER OR BRINE, MECALSA TYPE: MC CDA-2 Technical description: Material: Stainless steel Aisi-304 Heating: Steam/hot water in internal coil Opening: Pneumatic Power supply: 220 V ? 50 Hz Capacity: 2 baskets Internal diameter: ? 1227 mm Outer diameter: ? 1284 mm Height: 1300 mm

CDM VIBRO CLASSIFIER FOR GRANULATES, Constructed in 2003, 8 mm holes on 1st screen, Users manuals, drawings, CE., Available RECONDITIONED, (pictures show the machine prepared for optimizing transport), See how we recondition [HERE](.germanplast.eu/pages/what-we-do), AVAILABILITY: RUNNING

1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Boiler/Vessel Double Jacket Jacket Type: C10-2 Volume: 15 liters Prod.Nr.: 1137 Manufacture: 2002

1x Fermenter (plant) BIOSTAT Type: C-CDU Reactor: Type: C-10-2 Volume: 15 liters Prod.Nr.: 235 SUS Manufacture: 2001

Key data: 130 mm

Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Industri ...

Model: Heidelberg CD 102-5+LX, - Year: 2001, - Impressions: 279 million, - Control System: CP 2000, - Features: Autoplate, Pull lay control, Rear edge blowers, Alcolor Vario, - Cooling & Peripherals: Technotrans HydroStar, AirStar Pro (Air-cooled), - Wash-up Devices: All automatic wash-up devices (Ink rollers, Blanket, and Impression cylinder), - Sheet Control: Ultrasonic double sheet control, Antistatic device Eltex, Ionizing bar in feeder, Ionizer on delivery, - Delivery & Drying: Extended delivery, Powder Exatronic PLUS, IR Dryer version 2, UV package delivery, - Coating System: Coating unit pan roller system (2 rollers), Varnish supply unit (360l/h), - UV Equipment: 2x UV lamps on delivery by MIKON (installed 2013), - Pre-press: Plate puncher Bacher, Plate bender NEl, Model: Heidelberg CD 102-5+LX, Impressions: 279 million, Control System: CP 2000, Year: 2001

Heidelberg CD 102-6+LX. AGE. 1996, Impr. 301 mil, CPC 1-04, Preset, Autoplate, Alcolor, Technotrans, All wash up devices, Ink temperature control, Air Transfer, Extended delivery, IR Dryer, Coating unit Anilox system, Powder Graphix, Air-cooled

Fanuc GE Series 16-L + Tatung CD14JBS

Metal lathe Mammut CD6250B, good condition, built in 2006, standard equipment, 6 kW, 1500 mm center width, 250 mm center height, 2000 kgPrices subject to change, errors, printing and typesetting errors excepted

Steam traps without pressure losses! In the production of of compressed air, water always falls into the form of of condensate. If this condensate is not reliably separated, the condensate can in the compressed air network and damage to the consumers. Performance data Application for compressors up to 6.3 m³/min Application for filters up to 63 m³/min Operating pressure min. / max. 0.2 / 16 bar Capacity discharge 3 l/h Installation data Operating voltage (without el. Connection cable) 230 V Power consumption 10 W IP65 protection class Dimensions and weight Length x width x height 160 x 69 x 116 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Weight approx. 0.9 kg

This 3-axis CDM Rovella BF 600 die-sinking EDM machine was manufactured in 1997. It features a 1400x700 mm working area and comes with equipment included. If you are looking to get high-quality die-sinking capabilities, consider the CDM Rovella BF 600 machine we have for sale. Contact us for more information about this machine.

Key data: 22 , 8 , 2

Atlas Copco SF22+ Compressor Atlas Copco CD45+ Dryer Sold as a set. Oil-free air compressor Pressure: 8 bar Flow rate: 2.4 m³/min Power: 22 kW Weight: 687 kg Year of construction: 2024 As good as new Unused device All employees speak Dutch, German and English Prices plus VAT Shipping available for an extra charge (Subject to changes and errors in technical data, information and prices as well as prior sale)

(2019) 250t Dirinler Eccentric Press High-Performance 250-Ton Precision Eccentric Press This Dirinler eccentric press represents the modern standard, offering a high-tonnage 2,500 kN capacity with advanced variable stroke rates ranging from 50 to 70 strokes per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 2500 P 81 Serial Number: 04 M 25 0010 A180114 R Year of Manufacture: 2019 Nominal Force: 250t Stroke Rate: 50 – 70 strokes/min Stroke Length: 4 – 140 mm Ram Adjustment: 100 mm Shut Height: 502 mm Plate Dimensions: 1,250 x 850 mm Max. Tool Weight: 1,058 kg Motor Power: 18.5 kW Operating Voltage: 400 V / 50 Hz Overrun Time: 172 ms Safety Distance: 275 mm Total Weight: approx. 19,178 kg

(2019) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180149P Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate (Variable): 60 – 85 strokes/min Stroke Length (Adjustable): 30 – 110 mm Ram Adjustment: 93 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 158 ms Safety Distance: 252 mm Machine Weight: approx. 9,960 kg

(2019) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180153R Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length (Adjustable): 30 – 110 mm Ram Adjustment: 97 mm Distance Between Table and Ram: 482 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 143 ms Safety Distance: 228 mm Machine Weight: approx. 9,960 kg

(2019) 160t Dirinler Eccentric Press High-Performance 160-Ton Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160007A180151P Year of Manufacture: 2019 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length: 30 – 110 mm Ram Adjustment: 95 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,465 rpm) Max. Permissible Upper Tool Weight: 187 kg Over-run Time: 152 ms Safety Distance: 243 mm Machine Weight: approx. 9,960 kg

(2020) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2019 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a variable stroke rate of up to 85 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P81 Serial Number: 04H160011A200180 Year of Manufacture: 2020 Nominal Force: 160t Stroke Rate: 60 – 85 strokes/min Stroke Length: 20 – 110 mm Ram Adjustment: 95 mm Distance Between Table and Ram: 480 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,462 rpm) Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 130 ms Safety Distance: 211 mm Machine Weight: approx. 10,900 kg

(2015) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2015 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a fixed stroke rate of 62 per minute. Technical Details ‍ Manufacturer: Dirinler Model: CDCS 1600 P81 Serial Number: 04H160012A 140098R Year of Manufacture: 2015 Nominal Force: 160t Stroke Rate (Fixed): 62 strokes/min Stroke Length: 5 – 110 mm Ram Adjustment: 93 mm Distance Between Table and Ram: 474 mm Table Dimensions: 1,100 mm x 700 mm Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 145 ms Safety Distance: 324 mm Weight: approx. 9,960 kg

(2015) 160t Dirinler Eccentric Press High-Speed 160-Ton Precision Eccentric Press This 2015 Dirinler eccentric press is a modern, high-speed production unit capable of delivering 1,600 kN of force with a fixed stroke rate of 62 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Dirinler Model: CDCS 1600 P 81 Serial Number: 04H160012A 140099R Year of Manufacture: 2015 Nominal Force: 160t Stroke Rate (Fixed): 62 strokes/min Stroke Length: 5 – 110 mm Ram Adjustment: 98 mm Distance Between Table and Ram: 476 mm Table Dimensions: 1,100 mm x 700 mm Motor Power: 15 kW (1,460 rpm) Max. Permissible Upper Tool Weight: 390 kg Overrun Time: 134 ms Safety Distance: 302 mm Weight: approx. 9,960 kg

Complete Milk and Cream pasteurisation line with separator, homogeniser and CIP tanks, with an input capacity of 12.000 liter per hour. Line still located in the dairy plant in Germany., Milk pasteurisation unit:, - Open level tank., - Product pump., - Plate Heat Exchanger, 4-sections, GEA Ahlborn, VT 40 BC-6, year 1981, volume 194 liter, 6 bar., - Overpressure system with boosterpump to get more pressure on the raw milk side compare to the pasteurised milk side., - Flow diversion valves which opens in case the pasteurisation temperature is not reached., - Holding 20 seconds., - Indirect hotwater circuit (steam - water) with steam valves, SWEP brased plate heat exchanger and circulation pump., - Icewater circuit with ice water valves., - Temperature cylce: 7° (in) - regeneration - 56 °C (separator / homogeniser) - 74 °C (pasteurisation) - holding (20 seconds) - regeneration - 4 °C (o ...

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pull hydraulic cylinder -Manufacturer: Bahco, hydraulic pulling cylinder type CDXR 50-125 -Traction force: approx. 50 t -Stroke: 125mm -Piston rod: Ø 50 mm -Operating pressure: max. 800 bar -Recordings: inside 150 x 50 mm, see photos -Number: 1x cylinder available -Dimensions: 925/125/H165 mm -Weight: 32 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Rexroth, hydraulic cylinder type CD250B40/28-100 -Stroke: 100 mm -Piston rod: Ø 28 mm / M16 x 1.5 -Hole: Ø 25 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 88 x 400 mm -Weight: 5.9 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Rexroth, double-acting hydraulic cylinder, stroke 600 mm -Type: CD70G50/36-600 Z10/01HFDM2-2T -Art.No.: 891467 -Piston rod: Ø 36 mm -Holes: Ø 20/12 mm / Distance: retracted 850 mm -Dimensions: 895/65/H110 mm -Weight: 11.6 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: SMC, Round cylinder pneumatic cylinder double-acting -Type: CD85N25-80C-B -Stroke travel: 80 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 220/30/H52 mm -Weight: 0.3 kg

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Finishing machine for digitally printed labels, - Track width: 340 mm (max.), - Speed fully rotary: 120 m/min. (max.), - Report length: 152 - 457 mm (max.), unwinder:, - electronic rail guidance control system, - 3/76 mm spindle with magnetic brake, - Rolling diameter Ø 700 mm (max.), - 2 x 3/76 mm spindles with magnetic brake, - Rolling diameter: 2 x Ø 600 mm (max.), - automatic rail voltage control, - 1 x 3/76 mm spindle, unclogging/scrap, Flexowerk UV, fully rotary:, - servo-controlled press, - automatic register control, - UV drying unit, - 1 x anilox roller, - 1 x plate cylinder, Cold foil / laminating station:, - 2 x 3/76 mm spindles, - Wet laminating / cold laminating, - Laminate/Delaminate, Stamping shop, fully rotary/semi-rotary, - Stanzbreite: 330 mm (max.), - Punching tolerance: +/- 0.15 mm, - Magnet Cylinder: 22/176 Zähne, - automatic register control, - Servo control, Sep ...

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 64000 € : 1209.6 € : 80 to : 900 mm : 540 mm : 180 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 280 mm : 380 mm : 7.5 kW : 2010 mm : 1390 mm : 2750 mm : 5400 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

lifting capacity: 3,5 to. : ja : ja : 80 % stroke: 3,5 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 € : 849.95 € : 1 : 40 to : 4 mm : 630 mm : 450 mm : 160 mm : 3 - 75 mm : 154 1/min : 420 x 275 mm : 8 : 75 mm : 40 mm : 230 mm : 293 mm : 4 kW : 1174 mm : 1540 mm : 2200 mm : 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 € : 1328.67 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7.5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 63 to : 400 mm : 750x570 mm : 750x615 mm : 630 mm : 300 mm/s : 10-25 mm/s : 7.5 kW : 1710 mm : 1150 mm : 3170 mm : 4900 kg NC control with touchscreen 8-fold ram guide table and ram with T-slots 2 hand operation pressure adjustment stroke adjustment die cushion central lubrication system light guard user manual in German or English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 33700 € : 643.67 € : Doppelsäulenführung : 6300 x 41 x 1,3 mm : 15 - 120 m/min : 440 mm : 440 mm : 640 x 440 mm : rund 440 mm, rechteck 400 : rund 250 mm, rechteck 250 : rund 390 mm, rechteck 390 : 860 mm : 1.1 kW : 4 kW : 0.12 kW : 3150 mm : 1850 mm : 2115 mm : 2050 kg 3° inclined sawing band blade brush control panel hydraulic vice hydromechanical blade tension inverter linear way height adjustment pressure adjustment coolant pump saw blade security switch gearbox syncronized movement of sawing arm/clamping jaw hydraulic uplift of sawing frame user manual in GERMAN or ENGLISH ALTERNATIV: Version BMSY 440 CDGH NC with automatic mitre adjustment by NC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure:250 t throat:450 mm stroke:8 - 135 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:635 mm table surface area:1250 x 850 mm hole in the table:355 mm table height over floor:950 mm passage to the back:660 mm ram surface:790 x 610 mm ram adjustment:120 mm power requirement:18,5 kW weight:14,0 t Dimensions (WxDxH):1,5 x 2,8 x 3,65 m German Safety: permitted for manual loading:CE-Norm - EN 692, BGR 500 clutch:pneumatisch overload protection in ram:mechanisch ram counterbalance:pneumatisch

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABLEPick Picking tag AT-505 Rev 1.3 RA2336 S/N A17610000-2302 102AT505000004G V1.1 Product dimensions: 147 x 46 x approx. 20 mm Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Hersteller: Ablepick

description: Here we offer used safety light barriers of the brand Leuze. These photocells are already installed in the original bracket of Leuze and these brackets are equipped with two sensors + counter mirror. After delivery / pickup, you have the right to return the photocells without giving reasons, within 2 weeks unfree and get back the purchase price afterwards. Furthermore we offer used inverters of the VLT 5000, 2800, FC and FCD series in different designs and performance levels. Also with or without BUS card. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machine ...

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

UNION SHEET EXTRUSION LINE, for PS for thermoforming sheets up to 1.500 mm wide, Main TR130 extruder with 130 mm screw Ø, 200 kW drive, Elerctrically heated fan cooled barrel., second TR60 extruder with 60 mm screw Ø, 50 Kw drive, 1.500 mm. flat die with flex lip die, 1.500 mm wide 3 roll inclined polishing stack with a.c. drive + inverter individual roll drives., 3 zone thermoregulator, pump group, haul off unit, availability: immediate, working width: 1.500 mm, conditions: good overall conditions, type: flat die

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility