l beh 350 used for sale

Inv. Num. : 7225 Type: SBM - XS 300 G1E1 Producer: LISSMAC Created: 2015 Parameters: Hours: 166 Maximum sheet plate width: 15 mm Weight: 1400 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5060-4AB90-Z -Power: 0.18 KW -Speed: 1300 rpm -Shaft: Ø 11 x 25 mm -Design: B3 -Protection class: IP54 -Dimensions: 215/125/175mm -Weight: 3.6 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

monitor, text display, text monitor -Manufacturer: Lauer, text display -Type: LCA -Dimensions: 255/110/H75 mm -Weight: 1.1 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg

Electric motor, three-phase motor -Manufacturer: Lammers, electric motor type XF 225 S04 -Power: 37 kW -Speed: 1475 rpm -Shaft: Ø 60 x 115 mm -Design: B3 -Protection class: IP54 -Dimensions: 835/480/H565mm -Weight: 378 kg

ID2952 Eirich compulsory mixer 2500 liters compulsory mixer 2500 liters Forced action mixer 2500 liters

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5166-4AA70 -Power: 15 kW -Speed: 1460 rpm -Voltage: 380/660 V -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 54 -Dimensions: 640/310/H395mm -Weight: 88 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.602.12.1.4 i 31.5 -Shaft: Ø 60 x 120 mm -Dimensions: 650/355/H395mm -Weight: 113 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Lenze, gearbox type 12.102.60.1.1 i 37,80 -Shaft: Ø 60 x 140 mm / Ø 38 x 80 mm -Dimensions: 575/295/H370mm -Weight: 87 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, gearbox type R803-LP90 i 186,65 -Speed: 7.5 rpm at 1400 rpm -Shaft: Ø 50 x 100 mm / Ø 16 x 16 mm -Dimensions: 490/290/H310mm -Weight: 68 kg

Exhaust air purification system Manufacturer: Langbein Engelbracht Type: DV2-92 Plant number: No.20245 Year of construction:2004 Exhaust air volume: min. 1000 - max. 3500 Nm³/h Pressure drop: 60 mbar Burner: Gas Burner Inlet temperature: 20°C Power: Heat exchanger 600 kW Heating capacity: 230 kW Reaction temperature: 820 - 950°C Included: documentation, chimney, PC for control with software, EURO-FID, piping (if desired), control cabinet Location: Neu-Ulm

Electric motor, three-phase motor -Manufacturer: Lammers, electric motor type 7AA90L04 -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP55 -Number: 3x motor available -Price: per piece -Dimensions: 330/173/H220mm -Weight: 16 kg/piece

Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 200 LZ2 -Power: 37 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B3 -Dimensions: 735/480/H410mm -Weight: 288 kg

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

From stock Travel Drive Hydraulic from Lohmann Stolterfoth GFR 48 E 1064 Later taken over by ZF in the photos the brown is wax

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm -Weight: 171 kg/pc.

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...

Tumbler Soma, approx. 80 liters volume, completely in stainless steel, with vacuum pump and timer, Connection 400V, dimensions LxWxH approx. 117x97x120cm, weight approx. 230kg, older device, good used condition, fully functional

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5163-4AA21 -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Design: B5 -Protection class: IP 54 -Dimensions: 630/350/H405mm -Weight: 80 kg

Gearbox, spur gear, angle gear, worm gear -Manufacturer:Laipple / KEB, worm gear type NMS30 -Translation: i= 7.5/1 -Hollow shafts: Ø 9 x 22 mm / Ø 14 x 63 mm -Dimensions: 96/80/H110mm -Weight: 1.1 kg

Oiler, line oiler, line oiler, eco line oiler -Oiler: Line oiler for demolition hammers or other pneumatic tools -Number: 3x oilers available -Price per piece -Dimensions: 450/110/H100 mm -Weight: 3.1 kg/piece

Used vertical stainless steel tank, 5000 L volume. Tank with frame agitator and jacket (cooling-heating).

Used stainless steel, 5000 L volume. Process tub, complete with curd cutting harps. It was used for the production of granular cheese.

Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters

Oiler, line oiler, line oiler, eco line oiler -Manufacturer: ASL INC, Line oiler Line oiler for demolition hammers or other pneumatic tools -Dimensions: 350/190/H150mm -Number: 1x oiler available -Weight: 4.2 kg

Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm -Dimensions: 550/270/300 mm -Weight: 40 kg

Key data: 6 , 230 mm, 150 mm

I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.

Key data: 4 , 300 mm, 200 mm

I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !

Saw blade, wood saw blade, circular saw blade -Manufacturer:Leuco, saw blade HW-topline -Type: 400x3.8/3.2x30 Z96 -Article No.: 108371-00189882 -Speed: n max. 4800 rpm -Use: non-ferrous profiles/plastics -Dimensions box: 480/460/H15 mm -Weight: 3.2 kg

fan, ventilator, blower -Manufacturer: Prein fan, fan ventilator, radial fan -Type: RES 85/42 -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

Fan, blower, radial fan -Manufacturer: AMA, fan, radial fan -Type: Motor 25105109 -Power: 0.6 kW / 2800 rpm -Voltage: 220/380 V -Fan wheel: Ø 225 x 70 mm -Dimensions: Ø 300 x 370 mm -Weight: 13.2 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored

welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Manufacturer: ESAB, welding rectifier type LHE 260 -Welding power: max. 260 A -Welding cable with electrode clamp -ground cable -Dimensions: 710/480/H865 mm -Weight: 119 kg

loudspeaker -Manufacturer: GSP, loudspeaker, manufactured for Stadler -Art.No.: V100894 LI6-R/ÜLK -Stadler:Ident No. 2354258 -Dimensions: 140/125/H70 mm -Weight: 0.6 kg

Capacity: 60t, Bar: 150

Used ribbon mixer by Riela. Capacity 2000 L. Engine power 11 kW.

max. ram stroke: 230 mm throat: 230 mm table diameter: 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 17 mm, 40 , 1200 U/min

Kategorie / Category: Twin-screw extruder / Twin-screw extruder Nummer / Number: DE27684 Manufacturer / Manufacturer: Leistritz Typ / Type: ZSE 18 HPe Baujahr / Year: 2009 Capacity: approx. 40 - 60 kg/h Motor: 9.4 kW AC max. screw speed: 1,200 rpm Screw diameter: 2 x Ø 18.8 mm L/D: 40:1 Material: PE, PP, PS, ABS + fillers // more details: synchronous, atmospheric degassing, segmented screws and barrels // Control: MacromateXX Siemens with visualization //

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Bernstein, Inductive proximity switch -Type: M30AS/010-LSD -Number: 7x sensor available -Price: per piece -Dimensions: 115/55/H36 mm -Weight: 0.3 kg/piece

Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately

Spandau Twin Screw Pump 6.3 kW Power: 6.3 kW Voltage: 400/690 V Frequency: 50 Hz Flow rate: Qmax: 55 l/min. Speed: 3525 rpm. Max. diving depth: 262 mm More pumps new and used - you can find them in our shop! International shipping costs on request!