l beh 350 used for sale

offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Designation: BIVITEC clamping shaft screen Type: LIV/ED 2600x8 Design: Dry sieving Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. 16.5 t SPECIFIC COMMENT - Incl. drive - Incl. supports ------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Description: BIVITEC Flip Flow Screen Type: LIV/ED 2600x8 Version: Dry screening Number of screen decks: 1 Year of construction: 2005 Screen length: 8,000 mm Screen width: 2,600 mm Weight: approx. approx. 16.5 t SPECIFIC COMMENT - Incl. drive unit - Incl. supports

Dissolver Loher EC 10-6 Explosion protected version Power 5,2 kW

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

Electric motor, three-phase motor -Power: 1.4 kW -Speed: 720/1440 rpm -Shaft: Ø 24 mm -Construction: B3 -Dimensions: 345/240/H180 mm -Weight: 24.2 kg

Wartsila L32 cylinder heads Brand new condition With BV class certificate 8 Pcs available In our stock in Istanbul Turkey

3. Qty. 6 Second-hand process tanks Mfc.: Glencore Volume: 80 m³ Built: 2000 Dia.: 4.64 m Height: 5.23 m Stopped: 2018 Material: AVESTA 2507 (Super Duplex Steel) Code: API - 650 Capacity: 80 m³ Weight: 4.8 T Process: Leaching process Asset: Zinc Asturine Construction Structural Element Thickness Material Bottom 6 mm AVESTA SAF-2507 Virolas 6 mm AVESTA SAF-2507 Internal 6 mm AVESTA SAF-2507 Ceiling 6 mm AVESTA SAF-2507

Electric motor, three-phase motor -Foot: damaged -Handover: as is -Power: 14 kW -Speed: 2890 rpm -Shaft: Ø 35 x 90 mm -Construction: B3 -Dimensions: 580/370/H390 mm -Weight: 104 kg

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 270/975, year 2001, capacity 5 Kg per batch, autoclave diameter 270 mm, delivered with 1 carrier with 1 sword, sword useful loading height 975 mm, add vessel

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 550/975, year 2001 and 1989, capacity each 20 Kg, autoclave diameter 550 mm, The 2 machines are delivered with total 2 bobbin carriers with 4 swords each, each word has a useful loading height 975 mm, add vessel on each machine, the 2 machines share the same electrical cabinet which was supplied by LORIS BELLINI in 2001

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 840/975, year 1998, capacity 40 Kg, autoclave diameter 840 mm, delivered with: 2 carriers with 8 swords each, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 750 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

Electric motor, three-phase motor -Lenze: GFT 100-2 (0.6 kW 800 rpm) -Power: 0.6 kW -Speed: 800 rpm -Lenze fan: S2E 170 (0.05 kW 2500 rpm) -Shaft: Ø x L 28 x 60mm -Construction: B3 -Dimensions: 710/260/H200 mm -Protection class: IP54 -Weight: 31.5 kg

1 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machine type RBNV 1280/975, year 1990, capacity 150 Kg, autoclave diameter 1280 mm, delivered with: 1 carrier with 22 swords, each word has a useful loading height 850 mm, 1 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, add vessel with mixer

Valve, control valve, emergency stop valve -Type: VAC-14 VIZ-3311-LOVB-125G -Number: 10 valves available -Price: per piece -Dimensions: 195/90/H60 mm -Weight: 1 kg

2 LORIS BELLINI high temp high temperature vertical cone/bobbin dyeing machines type RBNV 1280/975, year 2001, capacity 150 Kg each machine, both machines can run individually or coupled (total 300 Kg per batch), autoclave diameter 1280 mm, delivered with total: 4 carriers with 22 swords each, each word has a useful loading height 850 mm, 2 carrier for bumps or loose stock inside diameter 1200 mm and core diameter 300 mm and useful height 800 mm, each machine add vessel capacity 800L with mixer

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg

Gear motor, electric motor, electric gear motor -Speed: 2800/75 rpm -Power: 0.07 kW -Construction: B3 -Diameter shaft: 12 mm -Price: per piece -Number: 5x available -Dimensions: 250/160/H120 mm -Weight: 4.8 kg

Refer to code 1028 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg

Centrifugal pump, water pump, immersion pump -Delivery rate: 2 l/min -Motor power: 0.18 kW -Connection: 220-290/380-500 V -Speed: 2700 rpm -Tropicalized: IP 44 -Dimensions: 190/131/H247 mm -Weight: 5.4 kg

Qty. 1 Second-hand wall paper production line – already dismantled & in warehouse Mfc.: Shin Shang Built: 1998 New electrical incl. cables in 2019 Production stopped in 2/2023 In line system Printing width: 850 mm 6 colors printing station Hot embossing system PVC coating system Six colors high speed paper roll CI flexo printing machine Automatic high speed flexo printing machine High speed CI type Central Drum 6 Colors Flexographic Printing Machine for paper OPP/ BOPP/ PP plastic film rotogravure printing machine

Stick electrodes 2.5 x 250 -Type: Phoenix 330.1 SH Purple R -Weight per package: 3.3 kg

5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.

7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.

11.45 M WIDE SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 11.46 m Shelf offer consisting of: 07 x frame approx. 200 x 60 cm, disassembled. 48 x truss approx. 185 cm. 24 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1205,00 € Net plus statutory VAT. You will receive an invoice with VAT.

13.36 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 13,36 rm Shelf offer consisting of: 08 x frame approx. 200 x 60 cm, disassembled. 56 x truss approx. 185 cm. 28 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1400,00 € Net plus statutory VAT. You will receive an invoice with VAT.

57 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 57 rm Shelf offer consisting of: 031 x Frame approx. 200 x 60 cm, disassembled. 240 x truss approx. 185 cm. 120 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 5885,00 € Net plus statutory VAT. You will receive an invoice with VAT.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Span width: max. 450 mm -Load capacity: 1,000 kg -Number: 2x available -Price: per piece -Weight: 8 kg

Lauda ITH150 / 6KW heat transfer system LSI 51337 circulator 20 - 350°C. The plant was dismantled during operation. The insulated metal flexible hoses come along. They have 12mm Swagelok clamping ring fittings. The original description for all relevant components and the system itself is part of the delivery.

Meat mixer Laska Z 250 liters Mixing hopper: 250 liters Filling quantity max: 200kg Electrical power: 5.5kW Weight: 1380kg Delivery time: 30 days after advanced payment

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

High-frequency ignition device, heater, gas and oil burners -Landis & Gyr Type: LFL1.622 -Voltage: 220-240V -Frequency: 50-60 Hz -Price: per piece -Number: 2 pieces -Dimensions: 100/100/H125 mm -Weight: 1.2 kg

Volume: 1000 liters Loading: 450 kg Drum diameter: 1120 mm Electrical power: 1.9 kW / 3.9 kW / 9.75 Height: 1700x1200x1700mm Delivery time: 30 days after advanced payment

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Type: LBS043 / 80 / 1.5 Coil joining machine. Arc welding machine. Pneumatic clamping. Siemens HMI touch screen control. Year of manufacture: 2015. Coil/strip width up to 80 [mm]. Used machine in working condition. Strip length: 15 – 80 [mm]. Strip width: 0.5 – 1.5 [mm]. Cvolfxlg Power: 400 [V] / 50 [Hz]. Including operating instructions in German, schematics and packing. Delivery from stock. On stock more used machines made by Ideal, Bruderer, Schaal, Mabu, Bihler...

VACUUM MASSAGER LUTETIA TYPE 1, WITH BUSCH PUMP TYPE:100-136 Technical description: Drum diameter: Ø1000 mm Capacity: 500 liter Vacuum: 2 mbar Busch pump type: 100- 136 (Serial number:176722) Pump dimensions: 700 x 400 x 450 mm Machine dimensions: 2400 x 1300 x 1800 mm

Compressor, compressor make Dorin, type H1502CS/LIE, 56.8 cbm/h, NEW

Year of construction: 2011 Hours 4450 Load capacity 1600 kg Duplex mast Lifting height 4730 mm Construction height 2830 mm Free lift 150 mm Battery 24V 360 Ah Initial lift (increased ground clearance) Accessories: Charger

LUTETIA VACUUM TUMBLER, TYPE: 4 Technical description: SERIAL NUMBER: 16004 Power supply: 400 V, 60 Hz CAPACITY: 1800 liter, WEIGHT: 1400 kg, WITH LUTETIA STEAM GENERATOR: type: 24 kW, serial number: 12773, year of construction: 2014, capacity: 23 liter, DIMENSIONS: 3800 mm x 2000 mm x 2050 mm. (Including Busch vacuum pump on mobile s/s frame, dimensions: 830 mm x 510 mm x 640 mm)

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

1 LAFER carbon brush emerising/peaching machine type ULTRASOFT TWIN TOUCH, year 2018, table width 2200 mm, 2 brushing rollers, entry and exit in the same side, plaiter exit, dust suction and filters

Plummer Block Housings, Plummer Block Housings -Hole center height: 70/Ø 16 mm -Base plate: 235 x 147 mm -Dimensions: 235/147/H approx. 100 mm -Weight: 4.3 kg

Used steam boiler made by Loos, capacity 640 kg/h of steam per hour and pressure 10 bar. New 1993. Oil burner.

Used steam boiler made by Loos, capacity 3200 kg of steam per hour and pressure 10 bar. New 1999. Temperature 185 deg C

Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray

1 piece hydraulic radiator with electric motor, 2 pieces hydraulic pump and filter for sale. To be delivered completely on pallet. Other hydraulic components available.