l beh 350 used for sale

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 mm, 3500 mm, 800 mm

For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories

Load stand, swivel stand, lifting stand, shackle, load jack, lashing eye, lashing ring, anchor point, load stand thread -Quantity: 7 pieces -Height: 220 mm -Base plate: 450 x 350 x 20 mm -Shackle plate: 146 x 146 mm, M42, 4 pieces with shackle -Price: complete -Dimensions: 450/350/H220 mm -Weight: 42 kg/unit

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Immediately available refurbished lubricating oil coolers, even used ones we have all in stock

Flail mower rear attachment cat. I and II, for PTO drive 540 rpm, consisting of 2 x 125 cm flail mower, foldable left and right, mowing width approx. 350 cm in connection with front mower (not included!), otherwise approx. 100 cm remain unprocessed in the middle. Little-used machine from public Hand, built in 2009. Various front mowers and other mowing technology in stock - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 610 mm -Length: 3.5 m -Transport dimensions: Ø 220 x 610 mm -Weight: 22 kg

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.

A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats  ...

WASHING LINE for PLASTIC SCRAPS, for 350-550 kg/h average capacity depending on contamination and material, material loading screw conveyor with hopper, equipped with vibrating motor, made of stainless steel, stainless steel tank size 5,0 x 1,5 x 2,0 mt. complete with 2 horizontal skimming screw conveyors for material handling. 8.2 kW, 50 Hz., horizontal screw conveyor at the bottom + diagonal screw conveyor for extracting sunk material, stainless steel safeti grate on the upper part, diagonal material collection drainage screw conveyor, drying centrifuge, material extraction fan, electrical panel, the line was built in 2008 and is offered completely reconditioned

This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW.

In good condition, working.

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Length measuring device: used for slats/blinds production -Rotary encoder: Heidenhain ROD 426.003 - 1000 -Pneumatic components: Manufacturer Festo -Dimensions: 350/400/H1130 mm -Weight: 80 kg

Key data: 2020 mm, 1600 mm, 350000 mm

Stock number: 4023 LATHE Manufacturer: SKODA, Type: SUT 200 TD x 35000 Machines NO.: ob22780, Year of manufacture: 1984 Specifications: Turning length 35000 mm Turning over transverse slides 1600 mm Ø Gr. turning diameter 2020 mm Max. weight in quill 63000 Kg Spindle Motors Power 2 x 82 kW Total power 2x150 kw kW Accessories: Querschlitte 2 x ( Double ) Universal chuck 2 x 2000 mm mm Ø Rotating bezel 6 Fixed bezel 5 + 2 mm Ø Tailstock 2 x Machine needs be to rebuild - with new control Length: 45,200 mm, Height: 3000, Width: 3500 mm, Weight: 150,000 kg

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

; in order

Flange ball valve / valve Manufacturer: Böhmer DN 350 Type: 450 PN 16 Model: TEFL 50-350-001 NEW, from stock reversal

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Horizontal Milling Machine DIXI, Type 350 Mach. No. 350-16 Control: Dixi CNC 4400 Table dimensions: 810 x 810 mm table load: 2000 kg X/Y/Z: 1000 / 1000/1000 mm B-axis rotating table C-axis vertical round rotating table RPM: 10-3000 U / min Power: 18 kWh Table with 7 T-slots: 18 mm rapid traverse: 20-10000 mm / min taper ISO 50 Weight: 17 tons Accessories: Vertical milling head, vertical round table, angle rack, holders, etc.

2pcs 3500 x 2000 x 350 mm price 7000eur/pc

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg

PTC CTR-C cold water trailer similar but no dynajet, oertzen, falch, ROM, Rioned, plaid, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following cold water models are available: CTR-C 43/180 | 43l/min. at 180bar | Petrol Engine: Honda GX690 17.7kW CTR-C 55/160 | 55l/min. at 160bar | Petrol Engine: Honda GX690 17.7kW CTR-C 60/150 | 60l/min. at 150bar | Diesel Engine: Kohler KDW 1003 19kW CTR-C 20/350 | 20l/min. at 350bar | Diesel Engine: Kohler KDW 1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 350 kg - High pressure pump: Comet TW Premium with integrated gearbox - HD reel: manually with max. 1/2" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Water tank: 400 l - Op ...

PTC CTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only for versions 250 and 350 bar) Trailer similar but no dynajet, oertzen, falch, DIBO, - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: CTR-H 16/250 | 16l/min. at 250bar | Engine: Kohler KDW702 12.6kW CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12.6kW CTR-H 20/350 | 20l/min. at 350bar | Engine: Kohler KDW1003 19kW - Dimensions: 3,045 x 1,390 x 1,190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox Bhdwmzmvai - HD reel: manually with max. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manually with 35 m. 3/4" hose - Wate ...

Sales are made on behalf of the customer. Professional high-pressure cleaner DYNAJET 350th HELI The No. 1 in efficiency, power and performance. Professionals from all industries worldwide rely on dynaJET's highly efficient high-pressure water cleaners. These high-pressure units impress with their universal application possibilities, extreme cost-effectiveness, absolute reliability, long product life and uncompromising quality. Standard safety equipment offers you and your employees the highest level of safety. The latest generation of DYNAJET high-pressure units offers reduced fuel consumption, lower emissions and improved ease of use. Get efficiency, or even the opportunity to conquer new business areas, in your company. All DYNAJET high-pressure cleaners are comprehensively tested by our quality management before they are delivered. Our product and accessory portfolio ensu ...

The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General Specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 08x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 800 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

We offer you here a used Workbench rack for sale. Dimension: Width: approx. 1,600 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: SSI Schäfer Type: PR 350/600 Included in delivery are: 02x workbench stand, used Material colour: sendz. galvanized Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x workbench trusses, used Material color: gray Box profile: 110/140 x 50 mm Clear width: 1,400 mm 04x safety pins, used Version: completely galvanized The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days.

Electrically heated furnaces with conveyor belt (for non-explosive substances) TECHNICAL DATA temperature max.: 420°C working temperature: approx. 350°C total power consumption: 60 kVA heating power: 48 kW drive: 0,55 kW air circulators: 2 x 4 kW number of control groups: 2 external dimensions (approx.): length: 8500 mm width: 1800 mm height: 2625 mm useable dimensions: conveyor belt width: 900 mm clear height: 150 mm heated length: approx. 7200 mm

DYNAJET 350th HELI INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame ...

ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery  ...

Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 350me with up to 350 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...

Cantilever rack NEW Data: - H : approx. 350 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 350 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

Manufacturer: Medoc The machine is made of sturdy 18/10 stainless steel construction; Suitable for working in harsh conditions; Floor model; Automatic preset control to fix the work bar; The model has a fixed top, as an option it is offered – with a removable top; Model for right-handed operation; Equipped with a special plate for adjusting the thickness of the pieces and a piston; Easy cleaning with pressurized water. Belt width: 2500 mm.; diameter – 300 mm.; Security system where the tape stops at the 4th second. ON – OFF activation of a button in the event of an emergency Design with smooth surfaces, where the machine is easy and quick to clean. Certified machine meeting CE norms. Technical data: Wheel diameter: 300 mm. Motor power: 3 HP, 230 / 400V, three-phase Tape length: 2,500 mm. Machine dimensions: 325 / 745 /1670 m ...

Oil pump, part no. 0R2770