61417 results l beh 350

Category: 204 grinding machines wood
Latest update: 07.05.2026
approved
dealer
item-No.: 156795812

new

Location: Land-de

Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 92011032

used

Location: Land-de

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Generalueberholt Gewawt: 12 months Inclusive: Oil filling (mineral oil), operating instructions with voltage: 50/60Hz 230-400/460V Engine nominal: 4 KW N.-Suction 200 m3/h final pressure or gas balast: approx. 0.08 mbar delivery time: from stock; ready for use

Category: 206 presses for wood
Latest update: 07.05.2026
approved
dealer
item-No.: 156795825

new

Location: Land-de

Working width: 3500 mm Working height: 2650 mm Number of cylinders: nach Wahl St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1403 other storage equipment
Latest update: 07.05.2026
approved
dealer
item-No.: 156894169

used

Location: Land-de

throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 92011038

used

Location: Land-de

Rotary vane vacuum pump - oillubricated Manufacturer: Leybold Type: Sogevac SV 300 Cat. No.: 10931 Status: Generalueberholt Gewast.: 12 months Including: oil filling (mineral oil), operating instructions with list of parts Voltage: 50/60Hz 230-400/460V Engine nominal: 5.5 KWfinal pressure or gasbalast: approx. 0.08 m bar Delivery time: ready for use; ready for use

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 92011045

used

Location: Land-de

Rotary vane vacuum pump - Oil lubricated Manufacturer: Leybold Type: Sogevac SV100 Voltage: 50/60Hz 230-400/460V N .-Suction Gasbalast: approx. 0.1 mbar (99.9% Vacuum) Status: Generalueberholt Performance: 12 months Operating instructions with supply list Delivery time: by arrangement; ready for use

Category: 702 breadmaking and confectionery machines
Latest update: 24.07.2025
approved
dealer
item-No.: 113861403

used

Location: Land-pl

with gas burners Weishaupt new glass wool new stainless steel sheets New storage engine Power Max 465 kW the boiler is uberholte with gas burner Weishaupt with new glass wool new grid grate Engine re-stored Power Max 465 kW the boiler is overhauled

Category: 502 presses for recycling / Baling presses
Latest update: 31.05.2025
approved
dealer
item-No.: 157404563

new

Location: Land-de

Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 92011054

used

Location: Land-de

Rotary vane vacuum pump lubricated Performance: 12 months Manufacturer: Leybold Type: Trivac D8 B and type BCS available Cat No.: 11296 Status: Generalueberholt and repainted Suction power: approx. 8 m3/h Endduck: approx. 5x10e Operating instructions Delivery time: from stock Please contact further details or technical advice via enquiry; ready for use

Category: 1300 other machines and plants
Latest update: 12.02.2024
approved
dealer
item-No.: 157479245

used

Location: Land-de
Price: 15.900 €

Make : Lutro Year of construction : 2005 Dimensions : each 4.0 m x 10.0 m x 4.0 m (LW approx. WxLxH) Supply air ceiling : Filter ceiling over the entire surface Lamps above : 2 x 5 pcs recessed luminaires with 4 x 58 W each Lamps side : 2 x 3 pcs recessed luminaires with 3 x 58 W each Entrance side : Sectional door, 3.5 m x 4.0 m (approx. WxH) Escape door : 2 pieces, 0.8 m x 2.1 m (approx. WxH) 1 piece, 1.0 m x 2.1 m (approx. WxH) Rusting : All-field rusting Heating : Hot water heat exchanger 250 kW Energy saving : Heat exchanger Supply air unit : 45,000 m3/h; 2 x 7.5 kW motor Exhaust air unit : 45,000 m3/h; 2 x 7.5 kW motor Dry temperature : 60 degrees C Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet Location : Room Ulm Retail price : each € 15.900,- net, ex location incl. disassembly

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 92011061

used

Location: Land-de

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Category: 1401 shelves / High racks
Latest update: 02.02.2026
approved
dealer
item-No.: 157767606

used

Location: Land-de
Price: 44 €

We offer you here a new Pallet rack traverse for purchase. Due to the hot-dip galvanized surface, these are Traverses suitable for outdoor use. Technical data for the pallet rack traverse: Shelving system: Lücht & Palm Type: MB Included in delivery are: 01x pallet rack traverse,new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Execution: Head traverse Agraffe: 2 HK (hooks) Clear width: 1,800 mm load per pair of trusses 3,600 kg, at the same time. distributed load 1x set HV set EN14399-4 - EN14399-6 10.9 Hexagonal screw with nut and discs for HV connection Material color: hot-dip galvanized In the case of these trusses, an edification for the Storage of shelf gratings welded on. (Height: 40 mm / Material thickness: 4 mm)

Category: 104 grinding machines / Double Grinding Bock
Latest update: 09.02.2026
approved
dealer
item-No.: 92177469

used

Location: Land-de
Price: VB 400 €

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

Category: 1300 other machines and plants
Latest update: 17.10.2025
approved
dealer
item-No.: 157802794

used

Location: Land-de

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

Category: 1502 diesel forklift trucks
Latest update: 07.05.2026
approved
dealer
item-No.: 157803743
New in: 1977

used

Location: Land-de
Price: 11.111 €

Category: 1510 pallet stackers
Latest update: 07.05.2026
approved
dealer
item-No.: 157803880
New in: 2000

used

Location: Land-de
Price: 3.300 €

Category: 1518 other lifts or indoor vehicles
Latest update: 07.05.2026
approved
dealer
item-No.: 157803920
New in: 2005

used

Location: Land-de
Price: 3.500 €

Category: 1518 other lifts or indoor vehicles
Latest update: 07.05.2026
approved
dealer
item-No.: 157803921
New in: 2007

used

Location: Land-de
Price: 3.900 €

Category: 409 other packaging machinery / Check weighers
Latest update: 12.01.2026
approved
dealer
item-No.: 92739537
New in: 2002

used

Location: Land-dk
Price: 2.250 €

Liebel Wäge- und Sortiertechnik USS – 4 checkweigher from 2002. Weighing range: - Max weight: 750 gram - Min weight: 50 gram Weight precision: 1 gram Speed: 120 packs per minute Conveyor width: 200mm Year of production: 2002 Serial number: 02003 Condition: good Dimensions: 1.300mm x 750mm & 1.650mm (LxW&H)

Category: 1019 spare parts construction machinery
Latest update: 30.03.2026
approved
dealer
item-No.: 119625770

used

Location: Land-de
VS

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Category: 409 other packaging machinery / Check weighers
Latest update: 12.01.2026
approved
dealer
item-No.: 92739546
New in: 1999

used

Location: Land-dk
Price: 3.000 €

Loma 6000 checkweigher. Push reject for over- and underweight weighins Maximum weight: 6 kg per product Weight precision: 0,6 gram Speed: 250 products per minute Finish: 304 stainless steel Conveyor width: 140mm Year of production: 1999 Serial number: ACW-40540-010733 Condition: good Dimensions: 1.800mm x 900mm & 1.100mm (LxW&H)

Category: 1501 electric forklift trucks
Latest update: 30.03.2026
approved
dealer
item-No.: 119625848

used

Location: Land-de

Charging for forklift battery suitable for 40 cells 80 Volt 40 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price

Category: 1102 engines / Diesel engines
Latest update: 02.02.2026
approved
dealer
item-No.: 95477785
New in: 2005

used

Location: Land-de

Lombardini 9LD625 / 2, 2 cyl. air-cooled diesel engine, displacement 1250 cm, approximately 19.1 kw / 26 PS 3,000 1/min. More diesel engines: 1-6 cylinder, various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 97241002

used

Location: Land-de

Waelzpistongeblaese Manufacturer: Leybold Typ: RUVAC WAU 1001 Cat No.: 11741 Suction plugs: approx. 1000m3/h Status: Generalueberholt Gewagewgewgewgewgewgew: 12 months Delivery time: from stock; ready for use

Category: 109 other metal working machines
Latest update: 30.03.2026
approved
dealer
item-No.: 119625885

used

Location: Land-de

Glass scale by Heidenhain Type LS303 LS603 LS703 Only types and lengths listed below are available. 1 x ML 1020mm LS703 1 x ML 1740mm LS703 1 x ML 1140mm LS603 1 x ML 220mm LS303 1 x ML 370mm LS303 Price on request Special price

Category: 1501 electric forklift trucks
Latest update: 15.04.2026
approved
dealer
item-No.: 119629377
New in: 1995

used

Location: Land-at

Side forklift JUMBO 5 t with fork adjustment, very good contition!; good

Category: 1107 other energy machinery
Latest update: 17.11.2025
approved
dealer
item-No.: 102629595
New in: 2005

used

Location: Land-tr

FOR SALE 3 SET ALFA LAVAL HEATPAC EHM 40kW TO WHOM IT MAY CONCERN; WE VE 3 PCS HEATER OF ALFA LAVAL HEATPAC EHM 40Kw AT OUR STOCK. NO. 0903-12987 MANUFACTURE YEAR 2005 DESIGN VOLTAGE 440V DESIGN TEMP. 160 C. DESIGN PRESSURE 1.5 MPa TEST PRESSURE 2.25 MPa MADE IN SWEEDEN WE VE ADDATIOANALY 2 SETS ALFA LAVAL HEATPAC EHM 72kW AT OUR STOCK IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards; Aliaga marine services Info/aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 aliagamarine.com TURKEY

Category: 703 meat and fish processing machines / Cutters and vacuum cutters
Latest update: 09.09.2019
approved
dealer
item-No.: 104118767
New in: 2010

used

Location: Land-de

Kilia vacuum bowl cutter, year of manufacture 2010, 200 liters bowl cutter, bowl and bowl-cover stainless steel, hydraulic noise reduction cover, knife shaft brake electrically operated, membrane keyboard, variable knife speed, variable bowl speeds, mixing speed, hydraulic loading device for 200 liter bins, hydraulic unloader, You are very welcome to inspect the machine at our facility in Koblenz, Germany.

Category: 1501 electric forklift trucks
Latest update: 15.04.2026
approved
dealer
item-No.: 119629441
New in: 2008

used

Location: Land-at

Double Decker - stackers, fork length 1150 mm, operating hours stand 13.01.2012 approximately 779, unladen weight 870 kg, capacity 2000 kg, height 2100 mm, charger; very well

Category: 1107 other energy machinery
Latest update: 17.11.2025
approved
dealer
item-No.: 106585130
New in: 2008

used

Location: Land-tr

FOR SALE ALFA LAVAL MMB 305S-11 TO WHOM IT MAY CONCERN; WE VE USED ALFA LAVAL MMB 305S-11 SEPARATOR AT OUR STOCK IT IS IN GOOD RUNNING CONDAT?ON . IT WHAS USED AS GAS OIL SEPARATOR PLS FIND SPECIFICATION BELOW. MODEL MMB 305S-11 YOB & SERIAL No. 2008 / 4170832 BOWL NO. 548715-01 CURRENCY 60 Hz MADE IN SWEEDEN READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With Best regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Category: 1107 other energy machinery
Latest update: 17.11.2025
approved
dealer
item-No.: 106585146
New in: 2004

used

Location: Land-tr

FOR SALE HFO SEPARATOR ALFA LAVAL S 825 TO WHOM IT MAY CONCERN; WE VE USED HFO SEPARATOR ALFA LAVAL S 825 AT OUR STOCK. IT IS IN GOOD RUNNING CONDATION.. PLS FIND SPECIFACATION ON AT BELOW. TYPE S825 YEAR / SERIAL NO. 2004 / 4130905 BOWL NO. 560626-04 CURRENCY 60 Hz SEPARATOR READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Category: 503 shredders / Pre-shredders
Latest update: 10.12.2023
approved
dealer
item-No.: 158505202
New in: 2007

used

Location: Land-de

Slow-running robust single-shaft shredder Suitable for the pre-shredding of various materials without solid stuttering materials. Application: Crushing of industrial and commercial materials, films, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, mixed plastics for thermal and recyclable recycling, loose or pressed into bales. Lindner Jupiter 3200 Drive power: 2x 160 kW (Schorch motors) Sieve perforation: Sieving 148 mm Control cabinet: complete with ( FUe -P-Drive) Opening: 3190 x 1750 mm Single volume: approx. 8 m3 Rotor length: 3190 mm Rotor flight circle: 745 mm Rotor speed: 50Hz : 58 rpm Number of rotor blades: 36 pieces Knife dimension, pointed knife: 145x 145 x 47 mm Geggenmesser unten: 9 pieces Scraper comb above: 9 pieces Hydraulic feed: 11 kW Weight: approx. 38 t Dimensions LxWxH mm: 6250 x 3260 x 3090(H=4900 m ...

Category: 505 other machinery for waste disposal and recycling
Latest update: 12.11.2025
approved
dealer
item-No.: 114541793
New in: 1995

used

Location: Land-pt

4 used LTG KENYA dust and fiber separators and compactors, year 1995, each composed composed of: centrifugal fan (radial blades) dust suction ventilator, motor with 11 kW power, blade diameter 800 mm cyclone centrifugal dust separator (Vortex) type ZSC 200, for air volume up to 2000 m3/h LTG compacting power screw (CPS), screw diameter 110 mm, motor with 0,75 kW power dust quantity up to 100 Kg/h

Category: 1300 other machines and plants
Latest update: 12.02.2024
approved
dealer
item-No.: 114541803
New in: 1998

used

Location: Land-de
Price: 2.990 €

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Category: 1300 other machines and plants
Latest update: 12.02.2024
approved
dealer
item-No.: 114541847
New in: 1983

used

Location: Land-de
Price: 2.900 €

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Category: 2100 electrical parts
Latest update: 22.12.2025
approved
dealer
item-No.: 158733862

new

Location: Land-at
Price: VB 600 €

Braking resistor, original packaging, ERBG012R01K9 Lenze, new Attention: Original Lenze product - No replica from… - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Category: 1403 other storage equipment
Latest update: 09.12.2025
approved
dealer
item-No.: 158749548

used

Location: Land-at
VS

1500 m² mezzanine Schäfer R3000 3-storey Used goods, top condition, as good as new, see pictures Ground floor mezzanine steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick ...

Category: 819 presses: accessories and spare parts / Offset printing plates
Latest update: 29.04.2022
approved
dealer
ankerimg
item-No.: 158822180
New in: 2007

used

Location: Land-de

Category: 109 other metal working machines
Latest update: 26.04.2026
approved
dealer
item-No.: 121112031
New in: 1981

used

Location: Land-lt
Price: 400 €

Type WLG Made in Germany 1981 y.

Category: 1300 other machines and plants
Latest update: 10.05.2018
approved
dealer
item-No.: 121444197

used

Location: Land-de

Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use

Category: 709 other food machines
Latest update: 23.03.2026
approved
dealer
item-No.: 115860753
New in: 1992

used

Location: Land-de

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

Category: 501 granulation plants / Cable granulating systems
Latest update: 18.12.2025
approved
dealer
item-No.: 121505214

used

Location: Land-de

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Category: 501 granulation plants / Cable granulating systems
Latest update: 18.12.2025
approved
dealer
item-No.: 121505216

used

Location: Land-de

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Category: 703 meat and fish processing machines / Mixers
Latest update: 16.01.2023
approved
dealer
item-No.: 159363929
New in: 2022

new

Location: Land-bg
Price: 2.230 €

Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power Mn 1100 W Tf 1472W Electrical connection 230-400V/50Hz Dimensions of the vessel mm 410×480 Capacity kg./ l. 50/88 A 750 mm B 465 mm C 1250 mm D 595 mm E 1120 mm F 150 mm G  ...

Category: 109 other metal working machines
Latest update: 30.03.2026
approved
dealer
item-No.: 119625794

used

Location: Land-de

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

Category: 703 meat and fish processing machines / Mixers
Latest update: 16.01.2023
approved
dealer
item-No.: 159363932
New in: 2022

new

Location: Land-bg
Price: 2.280 €

Intended for mixing meat mixtures and spices in order to obtain a homogeneous mixture. All stainless machines. The mixer can also be used to mix a smaller amount than the maximum capacity. The mixture is easily unloaded - by tilting the cauldron forward. Reverse system, mixing in both directions. Clarification: the price of the machine is for a floor model. Machine legs – long or short – are available as an option Power 1100 W mono 1472 W trif El. power supply 230-400V/50Hz Dimensions of the vessel mm 300×390 Capacity kg/l 30/42 A 680 mm. B 365 mm. C 1120 mm. D 530 mm E 975 mm F 150 mm G 650 mm L 440 mm M 940 mm N 610 mm O 1010 mm Weight: kg 49 Package sizes: mm 720x570x770 Weight: kg 59

Category: 1501 electric forklift trucks
Latest update: 30.03.2026
approved
dealer
item-No.: 119625846
New in: 2007

new

Location: Land-de
VS

Unused charging equipment for electric forklifts 48 Volt 120 A Processor-controlled BAE Duo loader with electrolytum woe Price on request More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please ask. Special price Varta Hawker Migatronik Still Linde Wagner

Category: 1501 electric forklift trucks
Latest update: 30.03.2026
approved
dealer
item-No.: 119625850

used

Location: Land-de
VS

Special charging device with pulse device. Weight approx. 250kg! 48Volt 150 ampere. With this loader, you can regenerate old batteries. Charging for forklift battery suitable for 24 cells 48 Volt 150 Ampere very good condition First picture similar! second and third picture of the original! More used loaders 24Volt, 48Volt, 80Volt of 55 amperes up to 200 amperes at the camp, please please ask. Varta Belatron Deta Special price

Category: 703 meat and fish processing machines / Mixers
Latest update: 16.01.2023
approved
dealer
item-No.: 159370337
New in: 2022

new

Location: Land-bg
Price: 2.820 €

Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of ​​homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. . The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Model  ...

Category: 703 meat and fish processing machines / Mixers
Latest update: 16.01.2023
approved
dealer
item-No.: 159370341
New in: 2022

new

Location: Land-bg
Price: 3.380 €

Machine made of stainless steel. Silent operation process. The spiral auger is already of proven quality for mixing minced meat - over 250 companies work with our mixing machines. The mixing body is designed with the idea of ​​homogeneous and precise mixing of minced meat with spices for the production of minced meat, kebabs, meatballs, for mixing ingredients for salads, etc. Unloading the mixture and cleaning the machine is quick and easy. Only parts from world brands are used to make the machine. The built-in motor - reducer is imported from Germany and is of the highest class . A limit switch is mounted on the safety cover . The built-in electric part has moisture-proof buttons. The hopper can be locked in different positions and can be tilted easily for unloading the mixture. Reverse system - mixing in both directions. Dimensions  ...

maximum number of results exceeded
please refine your search

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information