l beh 350 used for sale

Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.

Machine: centrifugal pump Manufacturer: Lowara Type: CO 350 / 15 K / A Year of construction: 2008 Q = flow rate: 6-30 m m³/h P2: 1.5 kW H: 16.9-7.2 m Hmin: 7.2 m Maximum working pressure: 8 bar continuous operation Motor, protection class: IP55 Insulation class: F Design: Closed engine with separate ventilation and aluminium alloy finned casing. Equipment: Equipped with silicon carbide / tungsten carbide / FPM seals as standard. Visit us at the factory in arrangement.

Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h

Freestanding distillery – 350 liter capacity Equipment: - Heating: by steam (against extra charge combustion chamber with water bath) - Steam jacket / water bath 4 mm stainless steel - Copper bubble Ø 900 mm, semi-conical - Filling DN 350 cast brass - Medium column / special fine burner with 3 trays - And attached tube end phlegmator and Kotzbecken - Incl. 4 sight glasses - Outlet ball valve DN 100 - Connecting piece agitator - Special tube cooler made of stainless steel including brandy - Spirit tubes stainless steel Basic price distillery, filling volume 350 liter: 32.620,00 € Additional equipment: Combustion chamber for solid fuels 48 kW made of 8 mm steel, incl. Smoke gas heat exchanger 8-pipe system 2.750,00 € Insulation water bath / steam bath made of stainless steel with 30 mm rockwool 1.760,00 € 4 connectio ...

approx. 36,30 running meters, H: 350cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 350 cm x 110 cm, disassembled. 52 x traverse approx. 270 x 14 x 5 cm, D30. 104 x locking pins. Levels: floor + 2 117 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3620,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 19,60 running meters, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 19,60 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 08 x Stand approx. 350 cm x 110 cm, disassembled. 28 x traverse approx. 270 x 14 x 5 cm, D30. 56 x locking pins. Levels: floor + 2 63 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2000,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 14 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 350 cm x 110 cm, disassembled. 20 x traverse approx. 270 x 14 x 5 cm, D30. 40 x locking pins. Levels: floor + 2 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1460,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

approx. 11,20 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 350 cm x 110 cm, disassembled. 16 x traverse approx. 270 x 14 x 5 cm, D30. 32 x locking pins. Levels: floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1190,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 11,20 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 350 cm x 110 cm, disassembled. 16 x traverse approx. 270 x 14 x 5 cm, D30. 32 x locking pins. Levels: floor + 2 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1190,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per pi ...

approx. 5.70 running metres, H: 350cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 350 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR35 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 350 cm x 110 cm, disassembled. 08 x Traverse approx. 270 x 14 x 5 cm, D30. 16 x locking pins. Levels: floor + 2 18 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 650,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.

Flexo Lombardi machine (print width 330 mm/web width max. 350 mm, 7 UV inks) Number of colors: 7 Print width: 350 mm Year of Make: 2019 Anilox rollers: 10 pieces Printing rollers/magnetic cylinders 4 sets 85z, 98z, 109z, 127z Printing plate thickness 1.14mm Pre-installation, video control, centrally controllable from the monitor and on the individual units, cooled rollers, movable laminating and printing sections from the gluing side, one punching station) The machine is in very good technical condition. You are welcome to arrange a viewing. If you are interested, I will be happy to send you more information and photos. Specyfication: Voltage/Power supply frequency 400 Volt / 50 Hertz Power capacity with UV drying system Kw 102 Mechanical speed 200 m/min Number of operators allowed 1 Max reel width mm 350 Max reel diamet ...

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Used chocolate tank made by Faspoma, capacity of 3500 L. New 1993. Tank with agitator, heating jacket, has 2.2 kW motor, 705 rpm, CPA 43 pump, control cabinet. Piping within the tanks and platform to the tanks. Very good condition. 3 pieces available.

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

Brazing line manufactured in 2018. This SCAME BRAZING LINE 50-20-350-GI-DR features a maximum temperature of 1150 °C and operates with an electric power source of 85 kW. The continuous longitudinal conveyor system efficiently moves parts along a passage chamber measuring 50 x 20 x 350 cm. If you are looking to get high-quality brazing capabilities, consider the SCAME BRAZING LINE 50-20-350-GI-DR machine we have for sale. Contact us for further details.

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/201, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644

Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,03 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 260 kg Compressed air connection: 1

Vacuum tumbler 350 liters Lutetia Capacity: 150kg Volume: 350 liters Dimensions: 1450 x 880 x 1430mm Weight: 200kg Capacity: 350 liters Voltage: 400V / 50Hz / 3NPE

General SKU218W173 MakeLauda TypeITH 350 EX Mach.No.LSI 51392 Year of construction2008 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity36 KW Temp.380 °C Specified Features - Temperature control unit Thermal oil heatercheck Electric heatingcheck Heating medium:Therminol 72 Heating capacity36 kW Electric capacity42,5 kW Temperature+20°C/+380°C Tank capacity60 Ltr. With pumpcheck Capacity8m³/h Motor5,5kW 400Volt With temperature controllercheck MaterialMild steel General LocationBarneveld Floorspace1,85x0,98 m Total height2,0 m Weight1240 kg CEcheck ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsTemperature control units ...

General SKULT009 LocationGermany CEcheck MakePharmatec GmbH TypeFluent Tank Specified Features - Bioreactor Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Bioreactor Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1: Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 125 PI Ex S Dk Y: Motor0,18kW, 230/400V, 2825rpm (EX) With variable speed drivecheck Speed mixing shaft75-540 rpm Bioreactors MaterialStainless steel 1.4404 (316L) General No.12563 Year of construction2021 Mounted on legs:platform: With switchcheck With switchgear(as is) Total height+/- 1,7 m Extra information Extra SpecificationsThe tank is equipped with pressure gau ...

General SKU293X474 MakeATML LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features MaterialStainless steel Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0001 Year of construction2013 Mounted on legsand wheels With switchgearcheck Floorspace1,50x1,0 m Total height1,36 m Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & o ...

General SKU293X475 MakeATMI LifeSciences LocationBarneveld CEcheck TypeMM-JTBB360 Main Features Volume350 Ltr. Motor0.13 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity350 l. Vessel sizesDia. 745x855 mm With jacketcheck With propellor stirrerMagnetic mixer Motor130 watt, 230 volt, 3000 rpm Speed mixing shaftVariable MaterialStainless steel 1.4404 (316L) With jacketcheck General No.MM-JTBB360-0002 Year of construction2013 Mounted on legsand wheels With switchgearcheck Weight250 kg Extra SpecificationsWith disposable mix bags, volume 350 l.Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid p ...

General SKU397X1104 LocationBarneveld CEcheck MakeLauda Pressure Working pressure10 Bar Main Features Heating (medium)Steam Capacity25 KW Temp.70 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Water / Glycol 80:20 Heating capacity25 kW Electric capacity51 kW, 400 volt With coolingcheck Capacity15 kW at 0 °C Temperature0/70 °C Tank capacity30 Ltr. With pumpcheck Capacity6 m³/h Motor3 kW With temperature controller(PID controller SR 500 - as is) MaterialCopper General TypeSUK 350 W Mach.No.HSK07001 Year of construction2007 Mounted on framecheck Floorspace1,2 x 1,9 m Total height2,24 m Weight1100 kg Extra information Extra SpecificationsConnections (outflow/return): DN 32Compressor: Hermetic piston compressor Delivering pump: 6 m³/h Pump motor: 3 kW Filling volume (heat carrier circuit): approx. 30 L Refriger ...

General SKU397X1129 LocationBarneveld CEcheck MakeLauda Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity44 KW Temp.80 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:Water/Glycol (1:1) Heating capacity1 m³/h Electric capacity44 kW, 400 volt With cooling(Water) Capacity12 kW at +10 °C Temperature0/80 °C Tank capacity60 Ltr. With pumpcheck Capacity3 m³/h Motorcheck With temperature controller(PID controller - as is) MaterialCopper General TypeSUK 350 W Mach.No.B14 730 Year of construction2003 Mounted on framecheck With switchgearcheck Floorspace1,14 x 1,5 m Total height2 m Weight950 kg Extra information Extra SpecificationsConnections (outflow/return): Flanges DN50: PN16: DIN 2633Compressor: Semi-hermetic reciprocating compressor Delivering pump: Grundfos CR 5 ...

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22410, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/137, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22418, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/136, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/202, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 1/2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 682 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-llc-250- 7621-new/268, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 3508C LLC 250-7621; Transport weight [kg]: 4350

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS   total power consumption: 60 kW DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 24000 kg ATTACHMENTS (PRESSES)   European CE standards: yes

General SKU290S396 LocationBarneveld MakeHermann Waldner GmbH &: Co (D) Type350 ltr No.929 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume350 Ltr. Specified Features - Vertical tank Open vertical tankcheck Capacity350 ltr Vessel sizesdia. 830x510mm Conical bottomcheck Outletdia. 50mm Max. temperature100 degr. C With jacket(55 ltr) Max. temperature140 degr. C MaterialStainless steel With jacketcheck General Year of construction1979 Mounted on legscheck Floorspace1,2X1,1 M Total height1,2 M Weight300 Kg Extra information Extra Specificationswith removable product basket, dimensions dia. approx. 700x450mm (approx. 175 ltr) Generic medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleo ...

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Max. saw blade diameter: 350 mm Pneumatic material tensioners Micro spraying device Material feed via 2-hand operation Saw table can be rotated in both directions Length stop and roller conveyor on request

Horizontal turning machine manufactured in 2022. This Feeler FTC 350 LMC features a maximum turning diameter of 235 mm and a turning length of 600 mm. It includes a rapid traverse of 30 m/min in both X and Z axes, along with a spindle speed of 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Feeler FTC 350 LMC machine we have for sale. Contact us for further details.

General SKU900WP038 LocationBarneveld CEcheck MakeLAUDA Pressure Working pressure10 Bar Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Electric heatingcheck Heating medium:water Heating capacity20kW Electric capacity22,7kW Temperature+5/+120°C With pumpSpeck-pumpen Type: MZ-40-1.0003 Motor2kW, 400V, 2830rpm (EX) MaterialStainless steel 1.4541 (321) General TypeIT HW 350-Ex Mach.No.B 17 276 Year of construction2003 Mounted on framecheck Floorspace1,7x0,7 m Total height1,55 m Weight400 kgGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsTemperature control unitsE-w ...

General SKU900WP034 LocationBarneveld MakeLAUDA TypeIT HW 350-Ex Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity20 kW Electric capacity22,7 kW Temperature120°C General Mach.No.B 17 275 Year of construction2003 Mounted on framecheck Floorspace0,6 x 1,6 m Total height1,6 m Weight800 kgGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsTemperature control unitsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals &  ...

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Intermediate conveyor belt / conveyor belt Type LTB 250-3500, S/N 81005, built in 1997 Length 3500 mm Width 250 mm Height 820-1000 mm Feed rate 20 m/min. with slip plate 3000 mm 2x pneum. Glass bead ejector Condition: technically and optically in very good functional condition Delivery: EXW Delivery time: at short notice by arrangement Viewing: by arrangement

pressure:600 t distance between columns:3640 mm stroke:350 mm no. of strokes:11 - 44 /min Distance table/ram, max. stroke up, adjustment up:1550 mm table surface area:3600 x 2500 mm sliding table:3600 x 2500 mm ram surface:3600 x 2500 mm Side window:2200 mm ram adjustment:400 mm material width coil line:500 - 1950 mm Material thickness at 1200 mm material width:0,6 - 2,5 mm Material thickness at 1850 mm material width:0,6 - 2,0 mm Material thickness at 1950 mm material width:0,6 - 1,75 mm Coil weight:35,0 t coil internal diameter:610 mm coil external diameter:900 - 1900 mm no. of straightening rolls:13 straightening roll diameter:50 mm Stack height:400 mm stacking dimensions - station 1+2 (L x W):150-2000 x 250-2000 mm stations:2 power requirement:112,0 + 35,0 kW Weight:390,0 t Dimensions (WxDxH):7,3 x 5,1 x 15,0 m Height above floor:9,1 m Height below floor:5,9 m clutch-/ brake combinat ...

STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...

Ex-lights for painting rooms: used 45-degree luminaires, recessed wall lamps, room lamps. with 2 or 3 or 4 x 58 W fluorescent tubes, for installation in painting systems. Please ask.

Description Item #8772 – POT FILLING LINE - Line Filling Chocolate Cream/Paste into Pot with Toy Currently producing 18gramme Pots. including: MONDINI Model A/C Tray/Pot Denesting System, LIVETECH Automatic System to insert spoon into pot, Model LSS, with PESCE GROUP MP10 Product Hopper & Elevator Feeder, SARG STM087 Automatic Toy Insertion Machine, to place toy into pot/tray. MONDINI Model VF/SPE Cream/Paste Dosing Unit into the pots MONDINI Model C/T Pot/Tray Lid Thermosealing Unit CICRESPI Model 1602056 Ink Jet Coding Unit LIVETECH Model LSS/LA19947 X-Ray Inspection machine End of Line Belts for packing. line will include the Mould for the Pot/Tray and the Mould for the Spoon