l beh 3000 used for sale

number of controlled axis: 7 workpiece weight: 7 kg weight of the machine ca.: 0,024 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Purete, Type: 3 Lampen UV Trockner, Year: 2017, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 5-100, Working widht max mm: 1300, Number of lamps: 3, kW power 1 lamp: 11,2, kW power all lamps: 37, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2300, Lamps straight installation: yes, Adjustable: halblast, Chain pitch mm: 45, Feeding speed m/min: 5-20, Conveyor: Stange, Drive power kW: ca,1,0, Exhaust air diameter mm: 3 X 120, Year :2017

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Manufacturer: Lenze, Year: ca.1995, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, aus Maschine: Homag, IdN A: 5,5/8,9, Kw output: 7,5, Volt/Hz: 50, pm: 1450, Motor mit Getriebe: Vorschubgetriebe Homag, Getriebe: 14.448.14.1.1.8, Flange motor design: yes, FREE TEXT: mit Disco Verstellgetriebe 11.712.08.20, Year :ca.1995

Manufacturer: Explosion geschützte Leuchten, Type: Jung Leiuchten, FREETEXT1: 2 Stück , FREETEXT2: 32 cm breit 86 cm lang/Einbautiefe 13 cm, FREETEXT3: geeignet für Spritzraum,

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

Manufacturer: Ligmatech, Type: Stapelmat ZHK 10, Year: 1990, Control: Ligmatech, Work piece width min-max mm: 140-800, Min.-max. workpiece length in mm: 160-1200, Min.-max. workpiece height in mm: 10-60, Year :1990

Manufacturer: Ligmatech Korpussaufrichter, Type: MTK 10, Year: 1999, Control: yes, Corpus length max mm: 2200, Working hight mm: ca.500, Pneumatical: yes, Rollentransport: yes, Single machine: yes, Total lenght: 2500, Working hight adjustable mm: yes, Pneumatischer Korpussaufrichter, Year :1999

Manufacturer: Lackaufheizer EX Ausführung, Year: 2000, FREETEXT1: geeignet für 200 Liter Fässer, FREETEXT2: Heizung Elektrisch, FREETEXT3: fahrbar auf Rolle, FREETEXT4: Durchmesser 650 mm, FREETEXT5: Höhe 1000 mm, Year :2000

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Manufacturer: Böllhoff, Type: 30281-Lackheizgerät, Year: 1993, FREITEXT1: Betriebsdruck 280 bar, FREITEXT2: Betriebstemperatur 90, FREITEXT3: Prüfdruck 384, FREITEXT4: Druckraumvolumen 0,92, FREITEXT5: Nennstrom 16 Ampere, FREITEXT6: Nennleistung 3 Kw, Year :1993

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Manufacturer: IST, Type: UV Lignocure 200, Year: ca.1995, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Working widht max mm: 1350, Number of lamps: 1, kW power 1 lamp: 10, Lampenlänge mm: 80/60, Lamps straight installation: 100, Lamps from below: ca.2800, Elektronische Leistungregelung: 950, Automatische Werkstückerkennung : 5-25, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: Stange, Year :ca.1995

Manufacturer: Lenze, Type: Leistungsverstärker, Modell: ERSM 2-4 200 Watt, Seriennummer: 4537112/ 0042, ID.Nummer: 00357574,

Manufacturer: Lange Kantenfräsgerät, Type: B 600, Year: 2009, Moulding spindles: 2, Routing: yes, Min.-max. workpiece length in mm: 8-60, Vorschub min- max m/min: Handvorschub, Mitre stations: yes, Mitre stations: yes, Radiusfräsen : 1,5 mm, FREE TEXT: Fräsmotore Frequenzgeregelt, Year :2009

Manufacturer: Lenze, Type: Leistungsverstärker, Modell: ERBM 240 200W, Seriennummer: 45367112/0034, Produktionsnummer: 00357874,

Manufacturer: Lenze, Type: Umrichter, Modell: 8200 Vector, Seriennummer: 0097, Produktionsnummer: 45382065, ID.Nummer: 00422974,

Manufacturer: Lenze, Type: EVF 8201-E, Modell: Umrichter, Seriennummer: 000696, Produktionsnummer: 45219668, ID.Nummer: 0384003,

Manufacturer: Lenze, Type: EVF 8201-E, Produktionsnummer: 45219668, Frequenzumrichter: yes, ID.Nummer: 00384003,

Manufacturer: Lenze, Type: EMB 8251-, Seriennummer: 0174, Produktionsnummer: 45173402, Bremsgerät: yes, ID.Nummer: 00387113, Power Input: 375 V/Imax 5,4 Ampere, Output Pav= Watt: 70, Output PpK= Kw: 2, geprüft: yes, Gebraucht: yes, Gewichtcht kg ca.: 0,5, Standort 32469 Petershagen: yes, Preis Stück Euro: 35, Preis zzgl. Versand: yes,

Manufacturer: Lenze, Type: EVF 8201-E, Seriennummer: 000715, Produktionsnummer: 45219668, ID.Nummer: 00384003,

max. wheel diameter: 180 mm table diameter: 145 mm max. module: 3-5 mm gear width: 250 mm table turning speeds: 800 U/min milling head vertical adjustable: 400 mm Milling axis swiveling range: + / - 45 ° max. milling cutter diameter: 90 mm hob turning speeds: 0 - 6000 U/min cutter length max.: 211 mm control: Siemens 840 D total power requirement: 23 kW weight of the machine ca.: ca. 10 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Machine in top condition, equipped with loading unit, many accessories. This machine is equipped with manual deburring function with a cutting wheel, no chamfering. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IST, Type: Lignocure, Year: 1993, Number of lamps: 2, kW power 1 lamp: 80, kW power all lamps: 20, Adjustable: no, Position of lamps: gerade, Working widht mm: 1350, Stabteilung mm: 120, Conveyor length mm: 3500, Chain pitch mm: 120, Outer belt width mm: 1600, Working hight approx mm: 950, Feeding speed m/min: 5-20, Drive power kW: 0.75, Year :1993

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Leica MC 120 Microscope

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: Lehbrink , Type: WL 38, Year: 1991, Control: Programm, Work piece winding off lenth max. mm : 3000-550, Through running lenght (Cutting lenght) max. mm: 550, Work piece thickness min mm: 10, Angular adjustable saw supports: yes, Pneumatically going in/out: yes, Fräsmotore Stk: 4, Power of milling engines kW: 4,2, Fräsmotore U/min: 6000, Automatical foil glueing device: yes, Scoring unit for foil glueing: yes, Length stopper: yes, Year :1991

Key data: 55 KW, 2970 1/min

Power: 55 kW Rated Speed: 2970 1/min 400V / 93 A

Key data: 37 KW, 2955 1/min

Power: 37 kW Rated Speed: 2955 1/min Weight: approx. 258 kg Price of an electric motor

workpiece dia.: 40 mm max. module: 2 min. module: 0,1 workpiece length - max.: 665 mm weight: 4,5 t spindle bore diameter: 82,5 mm Control: Siemens total power requirement: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Separator IFB 403 X-73 7500r/min 3-50/60Hz 230V Used tools

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

cutting width: max. 310 mm Cutting height: max. 125 mm Saw blade diameter: 500 mm Motor output: 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw -------------------------------------------------- ----------- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z ...

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

LVD brand press - type TPI 80/25 - 80 ton

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,190 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Key data: 13 KW, 17 kVA, 400 V

Net price (excluding VAT) = 1.950,- € Gross price (incl. VAT) = €2,320.50 - - - - - Lister generator set 17 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 17.2 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 17 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, plea ...

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

Key data: 16 KW, 20 kVA, 400 V

Net price (excluding VAT) = 2.250,- € Gross price (incl. VAT) = €2,677.50 - - - - - Lister generator set 20 kVA - - - - - Engine: - Lister (English manufacturer of industrial diesel engines) - 3 cylinders -Diesel -Air-cooled - 1500 rpm - - - - - Generator: - 20 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - A test run was done - The engine starts and runs well - The generator does not generate voltage - A used replacement generator can be purchased for an extra charge (see Fig. 5) - - - - - Scope of delivery: - Lister generator set 20 kVA - Consisting of motor and generator - Installed on a metal base frame - For an extra charge, a used 20 kVA generator can be purchased (see picture 5) - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package

DMG GMX 300 linear year 2008. GMX 300 LINEAR with turning length 1585 mm (tailstock 1500mm) control: Siemens 840D Powerline Hours in picture The DMG GMX 300 Linear is a high-performance machine tool designed for complex turning and milling tasks, often used in industries such as aerospace, automotive, and precision engineering. Here are the key features and specifications for a 2008 model: Key Features: - Type: The GMX 300 Linear is a turn-mill machine, which combines both turning and milling operations in one setup, improving efficiency and reducing setup times. - Linear Motors: Equipped with linear motors for high-speed movements, which provide increased precision, dynamic performance, and reduced wear compared to traditional ball screw systems. - Axes: It usually offers multiple axes (up to 9), enabling simultaneous multi-axis machining for producing complex parts in a single se ...