132,187 used machines on RESALE, but how to find them? Machine Search
3 axis cnc lathe Type: T-6M Producer: Leadwell Year: 2007 Control: Fanuc Fully functional, in good condition Find more here - / Contact us at -
Power plant (Lambion-Howden-Scheuch-Hamworthy) History - Commissioning: 2009 - Power plant built for the heat supply Manufacturer: Lambion Siemens (turbine, measurement and control technology) Imtech (electrics and performance data: 950 kW rated electrical power 2.00 MW rated thermal output HT(128 128°C) 1.50 MW thermal output NT (85 85°C) 6.74 MW thermal firing capacity Steam output: 7.5 t/h approx. 11,000 tonnes of fuel required per year LPM and WHS Boiler Manufacturer Lambion Year of construction 2008 Maximum steam production [t/h] 7.5 Max. permissible pressure [bar] 32 Max. permissible vapour temperature [ [°C] 440 Turbine / Generator manufacturer Howden Machine TWIN CA 34 Year of construction: 2008 Generator manufacturer: AvK Generator Generator type: DSG 74 M2 System data: Flue gas cleaning Manufacturer Scheuch Condenser / recooling manufa ...
The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...
Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...
Licon LiFLEX II i³ 766 DT B22 Precise mechanical machine Operating hours: approx. 40,148 h power: 150 KW The LiFLEX II i³ 766 sets new standards with its groundbreaking i³ technology, which combines two spindles in one machine. With double spindles and maximum accuracy, it enables a stable and precise machining process like never before. Thanks to independently adjustable motor spindles in the Z axes and a 5-axis configuration, this machine offers maximum performance in every operation. The generous spindle distance of 750mm and the generous working area of X 750 Y 660 Z 650 enable the machining of a wide range of workpieces with ease. Temperature sensors with innovative algorithms reduce the influence of different temperatures on the positioning accuracy of the motor spindles, while the Watt Pilot ensures reliable drill breakage control. The LiFLEX II i³ 766 is not onl ...
2019 Šmeral/ Pressmont LKT 250 D Crank draw press Type: LKT 250 D Manufacturer: Šmeral/ Pressmont Overhaul: 2019 Nominal force 2500 kN Working path 12.5 mm Ram stroke 250 mm Number of strokes 20 min-1 Usable number of strokes 12 min-1 Shut high 750 mm Adjustment of ram 100 mm Passage under guidance 1600 mm Ram working surface 1380 x 850 mm Table working surface 1575 x 1150 mm Table top thickness 130 mm Power of the main electric motor 30 kW The speed of the main electric motor is 1445 rpm The power of the electric motor for adjustment is 2.2 kW Speed of the electric adjustment motor 1440 rpm Press width 2980 mm Press depth 1500 mm Press height 4615 mm Weight 27,000 kg Included feeder, straightener and decoiler Press in very good condition, under power. Find more here - / Contact us at -
Laurijsen WeegAutomaten COMBIMAT CM-L4S Linear scales The linear scales from Combimat were specially designed as an initial model for the first first step in the automation of the packaging process. Thanks to the compact design, the weighing devices can be easily installed in any production area and can be cleaned very quickly when changing quickly when changing products. Applications The linear scales from Combimat are particularly suitable for dry, fine-grained products that can be easily conveyed in the conveyed in the vibrating chute: Tea, coffee, corn, rice, seeds, grain, animal feed, granulates, grain, etc, Advantages The weighing machines from Laurijsen WeegAutomats offer numerous advantages: - Very compact design - Machine made entirely of stainless steel - Touchscreen operation - Quick cleaning, very suitable for short suitable for short passages - Maintenance-fre ...
2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -
LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...
Venus Bliss is a non‐invasive lipolysis machine. It employs 4 diode laser applicators to reduce fat via lipolysis, and an (MP)2 applicator that combines Multi-Polar Radio Frequency and Pulsed Electro Magnetic Fields with advanced VariPulse™ technology to reduce cellulite around the abdomen, buttocks, and thighs for a smoother, more contoured appearance and it boosts the lymphatic circulation. Find more here - / Contact us at -
This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details.
This 3-axis Wenzel LH87 was manufactured in 2010. It features an X-axis travel of 800 mm, Y-axis travel of 1500 mm, and Z-axis travel of 680 mm, with a maximum table load of 1000 kg. The machine includes a Renishaw probe system and integrated rotary indexing table. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH87 CMM machine we have for sale. Contact us for further details.
used
We sell 200 x Lenovo T480, T490, T560, T570, T580, T590 notebooks German Keyboards The notebooks have been operated in Germany and are without power supply. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are on ...
We sell 30 x PCS SL8500 LTO7 tape drives / IBM In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these ...
CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -
Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - / Contact us at -
IWKA/Netzsch/Laetus/Mettler Toledo Garvens/Skinetta complete tube filling & packing line for conical aluminium tubes comprising: IWKA TZK 200 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 16 to 45 mm and a maximum tube length of 235 mm, rod length up to 750 mm, compressed air 6 bar, capacity up to 200 tubes per minute IWKA TFS 30 tube filling & closing machine for double & three fold, tube diameter from 10 to 40 mm, tube length from 50 to 250 mm, filling volume from 1.5 to 350 ml. (with suitable dosing pumps), capacity up to 200 tubes per minute, includes Netzsch BEF200 barrel/drum emptying system, automatic transfer of the filled tubes into IWKA CPS-R horicontal cartoning machine, continuous motion, carton size range A (width): 16 – 80 mm, B (height): 25 – 125 mm, C (depth): 55 – 180 mm, GUK flat sheet leaflet folder, Laet ...
Used 500 l capacity stainless steel mixer. Two agitators: - slow rotary (frame) 30 rpm Mixer speed adjustable as required. - fast-rotating (propeller) 1380 rpm. Installation and control for circulating pump.
Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Specifications: Working length: 6100 mm Bending capacity: 3.0 mm CNC control: 400 A Bending angle: 143° Distance upper beam – table: 200 mm Projection: 1,050 mm Foot step switches: 2 pcs. Motor power: 11.5 kW Dimensions (length x width x height): approx. 7000 x 1500 x 1850 mm Weight: approx. 9.5 tons
grinding length: 2500 mm grinding width: . mm workpiece height: . mm magnetic plate size: . mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thermo Scientific LTQ Orbitrap - Hybrid Ion Trap Mass Spectrometer LC/MSn in high resolution at an affordable price! Including: Ion Max ESI Source, HCD Collision Cell, backing pumps and Thermoflex 900 chiller. Fully tested with 3 months warranty. HPLC / UPLC / nanoLC available for an extra charge, installation in D/A/CH/NL possible.
Key data: 850 KW
2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...
Aircooled chiller National Lab 67 kW Cooling capacity: 67 kW / 19,1 tons (12/7 — 35°C) Year of manufacture: 2008 Type of refrigerant: R410A Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Sanyo (scroll) Number of fans: 3 pcs. Dimensions: 2.30+0.25x1.33x1.60 m. Weight: 690 kg. Condition: very good
rotary table dia.: mm max. dia. of grinding wheel: mm with manual ongoing: 0 manually feed: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 130 t, 3100 mm
3000 x 130 ton - Extra Long Stroke 600mm! 8 Axis With tooling / DigiPro angle measurement
For sale is a used bottle washer from the manufacturer PAC Swiss. The machine was used in a small bottling plant until the end and ran there without any problems. Specifications: Manufacturer: PAC Swiss Model: CB 14-0.5-R-6.5 LII Compact Year: 2003/2004 Capacity: 8,000 bph (min: 4,000 bph, max. 10,000 bph) Bottle type: 0.33 Ltr, 0.5 Ltr. - Bottles per row: 14 - Machine is frequency-controlled via a FU (conversion took place about 5 years ago - Machine is made entirely of stainless steel Please inquire for further data.
Siemens Sinumerik 828D control system with ShopMill Travel X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 min-1 Tool magazine for 24 Wkz. SK 40 IKZ Conveyor Measuring Sensors
Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795
power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 180 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
500 Liters Cylindrical Standing Stainless Steel Tank Polished interior Hinged lid on the top floor Cone
approx. 500 litres stainless steel container Type: Flow tank Content: approx. 500 litres Technical specifications : Swimmer V2A Dimensions approx: Diameter outside 1,180 mm, cyl. Height 500 mm, total height 1,000 mm Outlet DN 65
200 litre stainless steel tank Manufacturer : Ahrens & Bode Pressure vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Metrics: ca. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65 Documents: Nameplate
200 litre stainless steel tank Content: 200 litres Technical specifications : single-walled container, open at the top
900 litre stainless steel container Technical specifications : Metrics: ca. Diameter: 1,000 mm Cylindrical height: 940 mm plus cone 400 mm Height: 1,850 mm Manhole: 400 mm Outlet: DN 80 disc
Woodward LinkNet 9905-972 Ref J Overhauled Wärtsila Tuning Centre LinkNet 6 CH 4-20mA
Woodward LinkNet 9905-969 6 CH 4-20mA Overhauled Wärtsilä Tuning Centre
used
Offer 24508 Specifications: - Load capacity 100 kg - Face plate diameter 500 mm - Passage opening 155 mm - Manual face plate infinitely variable left + right tilt - Rotational movement infinitely variable mot. Adjustable - Right + Left Rotation - E.- Footswitch for start - stop - Table height in horizontal position approx. 940 mm - 3 cheek chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg
Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667
maximum number of results exceeded
please refine your search
