l beh 3000 used for sale

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear weighing and mixing machine, for mixing four different products - ideal for e.g. seeds, tea, muesli, nuts, pasta, sugar, salt, rice, general granular, granular products. The rotary version has a longer vibration path, which allows the particles to be better separated from each other, thus reducing the risk of jams. SPECIFICATIONS 2-HEAD SCALE: - 4 weighing heads each 0.5 litres, max. 300g/head - Weighing container capacity: 500 ml - Hopper: 8 l - Weight range: 5-300g - Accuracy: +/- 1.5-5g - Max. machine cycle rate at idle: 70 cycles/minute - Electricity: 220V, 1.2kW - Machine dimensions: L1028xW1078xH825mm -Condition: Year of construction 2024, but UNUSED AMTEC PLATF-SML - Frame/platform/rack for 4-head weighing systems - Feet and casters included - Frame dimensions: H 2660 x W 1350 x D 1000 m FOOT SWITCH: To open the weighing head during semi-automati ...

Diesel tank - 1000 liters - Double-walled - As good as new condition - Completely cleaned - Stackable - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - To be able to give an exact freight price please send me a request with your zip code - - - - - Price: - 1.000,- € + 19 % VAT = 1.190 € - An invoice with VAT will be issued - Payment: Prepayment - - - - - Other: - Sale of used machines in the actual state to traders without warranty

Surface grinding machine Make: LECHLER Model: 500 x 150

Used fully automatic proofing machine LILLNORD, Type: Topline -As good as new- - for 2 rack trolleys 60 x 80 cm - Computer control TSC2002 - including delivery - Installation on request - Condition: Very good, ready for immediate use Viewing and test run are possible by arrangement.

- Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits

I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.

Bevel gear motor, G50BB124MHAR2C, 401r/min, 68Nm, Lenze, mint condition If you have a VAT number, we will gladly issue an invoice without VAT. As good as new! The part was disassembled from a new unit that was not put into operation. - Bevel gear motor G50BB124MHAR2C, 401r/min, 68Nm, I=3,565 - Motor MDEMABS100 32C0C, 0,55KW, 1430r/min, - Bore for shaft D30mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.

Type: Elixa 35 Libra Year of construction 2017 Capacity up to 35 packs per minute - Automatic shell detection - Automatic weighing system - Film type: • PVC or PE stretch film • Film width 280 mm Machine is in very good condition. Is dismantled and can be visited in Leipzig.

Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery

Blustrafos Transformer BLUTRAFOS MANUFACTURER LOT: 45,908 MONTH/YEAR 05/2007 REF 6606,0001 REFR: IN TYPE TT CLASS ISOL. 1.2 KV DEGREE. PROT. IP-21 PHASES 3 TEMPERATURE CLASS: TEMPERATURE B ELEVATION 105 ºC IMPEDANCE AT 115º C 5.5% POWER 15 kVA FREQUENCY 60 HZ DYM1 CONNECTION GROUP MASS: 156 KG VOLTAGE: 380 CURRENT 22.8 A VOLTAGE: 480V CURRENT: 18.04 A

Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz

This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty  ...

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

Control Heidenhain TNC 640 Speed [rpm] 12000 Travel X/Y/Z [mm] 400/350/350 Spindle: Technology Direct Drive Speed 12,000 rpm Power (max.) 13 kW Torque (max.) 95 Nm Tool holder SK40 NC swivel rotary table: B-axis -50°/+110° C-axis 360° Clamping surface ø450 mm Table load (max.) 200 kg General: Tool magazine 48 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in X/Y/Z Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 30 bar Workpiece Measurement Probe, Heidenhain TS740 Tool Measurement Laser, Renishaw NC4 TX Setup operation Electronic handwheel Other equipment spindle coolers Other accessories Div. gebr. Tool holders

Dear's Sale, used 2 engine MAK 20 LAYNER Brgds Hakan KUSCU +905323642509

Dear's Sale, used 3 engine MAN 16/24 Layner, piston, conrod ,fuel pomp, air cooler, etc. Brgds Hakan KUSCU +905323642509

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L

Features Volume 40000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7500 mm Height 5800 mm Diameter width 2800 mm Surface inside 2B=IIIC ground Surface marbled on the outside Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 central to DN 40 Threaded Socket DN 50 Fermentation valve DN 50 Check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar and scale and standpipe valve DN15 Manhole 420x320 mm Sample tap DN 15 Ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50 and outlet pipe DN 50 with flange 4 calotte feet, heigh ...

Features Volume 10380 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 6500 mm Height 5500 mm Diameter width 1500 mm Surface inside 2B=IIIC ground Surface marbled on the outside Weight 1000 kg Description Topsoil: Clapper bottom 2 crane eyes Threaded weld-on nozzle central DN 100 to DN 40 with threaded nozzle DN 50 with airlock valve DN 50 and check valve DN 50 Sprinkler ring Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 420x320 mm Sample tap DN 15 1 ladder hook at the top Dip shank sleeve for temperature display Downward-swept CIP cable with DN 40 vent line with DN 50 connection thread Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn floor bead with angled seat valve DN 50, flush with the tank wall forward-d ...

Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System

LASKA VACUUM CUTTER KU 750 V

The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz

Laska W 130 Automatenwolf Perforated disc 130 mm Filling quantity approx. 1 to 2 E 2 boxes Drive 7.5KW 400 Volt 50Hz

We sell a Lippelt Mini Rustica with guillotine and punch. Good bakery condition

Used rack oven HEIN, Type: Luxrotor LR 86 -In bakery condition- - for 1 rack trolley 60 x 80 cm - Gas or oil burner - technically tested, immediately ready for use - an overhaul is also possible - Further information on request The furnace is technically tested and immediately ready for use. Viewing and test run are possible by arrangement.

Automatic Winkel Wolf KILIA set with built-in option Automatic Lifter for carts type Laska 200 liters for automatic filling. Manufacturer Germany. The machine is completely factory refurbished with 1 year warranty.

Used spiral conveyor belt with downward direction LIPSIA -In bakery condition- - Spiral conveyor belt - Collection table - Crimp barrel catch plate The plant is out of service. Viewing and test run are possible by arrangement.

-Volume of the tray 50 liters . -The machine is completely factory refurbished with 1 year full warranty . Delivery, installation, samples and training included in the price.

-The machine is fully automated as a working process. Automatic filling with lifting device for standard carts type Laska 200 liters. The entire receiving hopper is automatically tilted by means of hydraulics and the mixture is unloaded in seconds. -With the help of the 2 Z-shaped augers, the highest quality and gentle mixing is carried out, especially important for achieving the structure of the minced meat! The machine is optionally equipped with a vacuum and a vacuum pump! Completely factory refurbished with delivery installation samples and training and 1 year warranty.

Warranty, delivery, installation, samples and training included in the price.

Capacity: 900 liters Fully factory refurbished With one year warranty Delivery, samples and training - included in the price

Frequency: 50/60 Hz Speed: 1420/117 m3/h Power requered: 2,4/3,0 kW Inlet capacity: 100/117m3/h Max.vacuum: 3/3 mbar

Manufacturer: Fujifilm Model:Acuity LED 1600 Year of Manufacture: 2016 Certifications: -  ETL Intertek 3080219 - CE marked Conforms to UL STD 60950-1 - Certified to CAN/CSA STD C22.2 No.60950-1 Find more here - / Contact us at -

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

Qty. 1 Second-hand 4-Hi Non-Reversing Rolling Mill – still in operation! Mfc.: Lheung-Maschinery, Yushin Heavy Electric, Mitsubishi Built: Not specified! Rebuilt: 2017.08 Material: Aluminum & Aluminum Alloy Line speed: 80 m/min. Strip width: 550 mm Thickness: 0.3 – 6.3 mm Coil size: ID 508 mm OD 1500 mm Weight: