l beh 3000 used for sale

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Three-phase motor, electric motor -Power: 2.2 kW -Speed: 1435 rpm -Shaft: Ø 28 x 57 mm -Construction: B5 -Protection class: IP 55 -Price: per piece -Number: 1 Stück -Dimensions: 365/273/H250 mm -Weight: 20 kg/piece

weight of the machine ca.: 14,2 kg dimensions of the machine ca.: 22 x 24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB05BL: control unit -LUB12: basic device -Price: per piece -Number: 16 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Stacking electrode 2.5 x 250 -Type: SH Purple R -Weight per package: 3.4 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 108 mm -Weight: 6.5 kg

Ventilation system Howatherm , 16.000 m3/h, with speed control via Feqwenzumrichter Danfoss, filter, heat exchanger cold/warm, Silencer, control box, etc. Used for laboratory purposes only. Very good condition, as good as new. Price on request.

voltage phase frequency. 400V /3 Ph/50 Hz volume rate of flow 3,54 m/min stage pressures 7,5

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 044927 TT 321-2 302R 171.6-905 E23 -Outer milling cutter: Ø 172 mm -Height: 30 mm -Hole: Ø 40 mm -Bolt circle: Ø 60 x 8 mm -Weight: 1.7 kg

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Optical fiber, connection technology -Dimensions: 440/280/H170 mm -Weight: 1.5 kg

Power supply unit, converter, power supply, switching power supply unit, remote-controllable socket strip -Leunig: ePowerswitch EPS 4M+ -Remote control sockets: 4 -Dimensions: 225/110/H45 mm -Weight: 1.0 kg

Mixer 200 liters - NEW Hopper capacity: 200 l Two levels of hoper Two working shafts with paddles Power: 2.2 kW Dimensions L/W/H– 1400/750/1250 Weight: 300 kg

Type: MIX MAXI Mix volume: 450 liters Two mixing shafts with paddles Stepless speed regulation Programmable operation One outlet, mechanically operated Protective cover of hopper Lifting device for standard trolley 200 l Machine dimensions in сm: Width: 100,0 (190,00 with lifting device) Length: 180,0 Height: 220,0 Power: 5,5 kW Voltage: 380 V, 50Hz

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Hooper capacity: 900 l Two working shafts with paddles Front discharge of ready product in 200 l trolley Pneumatic opening of covers Automatic stopping when cover is open Loading unit for 200l trolley Smooth regulation of speed Setting of working time Voltage / Frequency: 400 V /50 Hz /3 phasses Installed power: approx. 11,0 kW Control voltage: 24 V DC Machine dimensions in mm. (with column loader): Width: 2 129,0 Length: 2 189,0 Height: 2 745,0

Three-phase motor, electric motor -Power: 5.5 kW -Voltage: 400/690 V -Speed: 1450 rpm -Shaft: Ø 38 x 80 mm -Protection class: IP55 -Dimensions: 450/260/H330 mm -Weight: 43 kg

Capacity: 400 l Heating: gas , 36 kW Outside dimensions 94 x 130 x 122 cm (HxWxD) Inside dimensions 48x110x80 cm (HxWxD) Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water

The depacker enables the unpacking of bottles from the shrink film. PLC SIEMENS S7-300. Output: up to 4 bundles/min.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: Ø 60 mm -Piston rod: Ø 35 mm -Flange: Ø 69 mm -Recording thread: Ø 22 x 2 x 30 mm -Stroke: 900 mm -Dimensions: 1090 x 100 x 100 mm -Weight: 17 kg

Plummer Block Housings, Plummer Block Housings -Hole center height: 40/Ø 10 mm -Base plate: 145 x 95 mm -Price: per piece -Number: 2 pieces -Dimensions: 145/95/H approx. 65 mm -Weight: 1.3 kg

Electric motor, three-phase motor -Manufacturer: Himmelwerk, electric motor type 2 LF12 / 5.5 -Power: 1.1 kW -Speed: 2780 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Dimensions: 250/180 / H270 mm -Weight: 10 kg

Electric motor, three-phase motor, pump motor -Manufacturer: Linn Pumps, pump motor without pump -Type: TP 80E -Power: 0.75 kW -Speed: 2900 rpm -Shaft: Ø 16 x 20 / 18 x 40 mm -Design: B3/B14 -Protection rating: IP54 -Dimensions: 328/157/H190 mm -Weight: 11.3kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks, 15-piece set: soft jaws -Hole spacing: 44 mm -Width: 28 mm -Various versions available: see photos, more pictures can be sent upon request -Price/Sale: only complete set -Overall dimensions: 470/180/H80 mm -Weight: 8.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 54 mm -Width: 45 mm -Dimensions: 135/120/H30 mm -Weight: 0.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, step block jaws -Top jaws: soft clamping jaws 1 set = 3 pieces -Hole spacing: 40 mm -Width: 30 mm -Dimensions: 120/90/H80 mm -Weight: 3.4 kg

Max. width of cutting: 530 mm The temperature of the meat block: up to -25 C The Control panel mounted on the machine Installed power: 32 KW Power supply: 380 V, 50 Hz Dimensions of machines in cm: Width: 200 Length: 190 Height: 210 Delivery time: 30 working days after advanced payment

Brand: Ambaflex Type: Apollo Width of the band: 400mm Transport height at the bottom: 400 mm Transport height above: 2000 mm

4 column truck / bus lift WITH INTEGRATED LIGHTS Lift is already dismantled, ready to load on truck. We can organize it transport inside EU. We can organize it 4-column: yes width between the columns 335cm length lanes 800cm

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: Schunk, Top jaws for power chucks, 3 sets -Type: SFA-AL 315, see photos -Hole spacing: 54 mm -Price/Sale: only complete set -Overall dimensions: 160/215/H90 mm -Weight: 6.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 160/190/H110 mm -Weight: 3,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: soft jaws, aluminum -Hole spacing: 54 mm -Price/sale: only complete -Dimensions: 135/170/H80 mm -Weight: 1.8 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

properties: Used belt conveyor Color: light gray SEW gear motor available With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 9 pieces Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width: 1,000 mm Belt width: 600 mm Divided into three sections 1x 570mm length 2x 1.240mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loading or delivery point and also serves, for example, as a connecting line in front of or betwe ...

Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Thickness: 25/13 mm -Drawing: with the pictures -Total length: 400 mm -Total height: 120 mm -Price: per piece -Number: 2 pieces -Weight: 13 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB12 BL: control unit -LUB12: basic device -Price: per piece -Number: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

properties: Used belt conveyor Color: light gray SEW gear motor available 2.2 Kw With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 8pcs Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width incl. motor: 1,180 mm Total width without motor: 800 mm Belt width: 700 mm Conveying height: 850mm, height adjustable Divided into three sections 1x 600mm length 2x 1.250mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loa ...

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: Leoni, fiber optic cable -Type: Gigaline AT-V/ZN) HH 4G50/125 -Length: 130 m -Price: complete -Dimensions roll: Ø 500 x 340 mm -Weight: 13 kg

Keller Lufttechnik MKR 063-55 Fan Air range: 37,000 Nm³/h Total pressure difference 3400 Nm³/h spec. Gas weight at 20 degrees: 1.2 kg/m³ Motor power: 55 kW Fan speed 1475 rpm Year of construction 1987 Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Rondo Laminazione pastry sheeting line 2001, Stainless, total length 7000mm, this line comprises an infeed section – multi roller satellite head, cross pinner and then calibrator making puff pastry from blocks / billets to final width of 600 mm and 2-3mm thickness, comes complete with electrical drawings and manuals.

Bread slicer Treif Diskus 400 Bäko Line circular knife -Circular knife bread slicer Treif Diskus 400 -with new knife -digital control - Cutting width adjustable from 3mm to 15mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Rated power 0.9 kW - Years of construction 2007 to 2012 External dimensions : width 80cm depth 70cm height 112cm

Metal band saw blade, band saw blade, metal saw band -Metal saw band: unused -Dimensions: 5000 x 34 x 1.07 x 2/3 - VPVR -Weight: 1.4 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -1 set: soft jaws, aluminum -Hole spacing: 54 mm -Dimensions: 180/200/H90 mm -Weight: 3 kg