l beh 3000 used for sale

Load Weight Shelf: 14000 kg Loading weight per level: 2000 kg Number of load levels: 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 12000 kg Loading weight per level: 2000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 Kg Magnetic field: mm weight: 80 Kg dimensions: 0,5 x 0,25 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick- ...

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts - Protective device for qu ...

Type Of Laminator: Solvent and Solventless // Working Width: 1315 mm

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand Complete Aluminium Extrusion Line Mfc.: CLECIM, AUBURTIN, OILGEAR Force: 3000 MT Bilet dia.: 8’’ Built: 1972 Modernised: Mechanical & Electrical in 2000 Scope of supply: Log Loading Table Log Furnace Billet Shear Extrusion Press Run-out Table Puller Stretcher Finishing Saw Aging Furnaces

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 46 mm, 3250 mm

Year of construction 2014 Single-channel charging magazine with Vulkollan channel Remnant output into the machine room Servo drive Glass wrapping and axial displacement 1 guide channel set Vulkollan up to max. LW 46 mm incl. material slider with high-performance oil flow PLC control, integrated terminal with touch screen Manually adjustable material separation Loading area: 3250 x 370 mm Good condition

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 210 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 15 kg / pc.

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Lastbock: with foldable rotatable load bracket -Type / load capacity: see photo -Base plate: 260 x 200 x 20 mm -Tube: 100 x 100 x 270 mm -Bores: Ø 16 mm -Number: 4x load jack available -Price per piece -Weight total: 16 kg / pc.

Vacuum lifter, vacuum lifting device, vacuum suction cup, plate lifter -Manufacturer: Rice, -Description: Vacuum lifting device without control -Previous use: Handling of solar panels -Condition: very good, only been in use for a few months -Vacuum pump: Becker Vt 4.16 0.55 kw -Steering: -Suction cups: Ø 25 mm -Lifting device: travel Z= 1780 mm -Individual components: see photos -Dimensions: 3000/850/H2480 mm -Total weight: 580 kg

Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T

Code: 0098 Brand: MINIMAX SCM Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests . However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors . Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 ...

SMEC SL 3000 BLMYear of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mmTurning length : 956 mm____________Description:Main Spindle:Technology:Belt-driven spindleSpeed (max.):3,000 rpmPower (max.):26 kWBar capacity:91 mmWorkpiece clamping:3-jaw chuck, SAMCHULLY HS-12Tool holder:Technology:12-station turretTool holder:BMT65Tool drive:5,000 rpmTravel in X/Y/Z:215/-/560Main Spindle:Technology:Trailed tailstockStroke:100 mmQuill diameter:110 mmTaper:MT5Main Spindle:Chip Management:Chip ConveyorCoolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 barTool Measurement:Automatic Measuring ArmAutomation:PreparedFinished Part Removal:Part Catcher with Collection BoxSetup Mode:Electronic Handwheel

Max. feed length: 3000 mm Sled can be folded up Manual Moving Extension on the right 2 height-adjustable feet Plastic rollers

DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SL Arbeitsbereich Tischdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mm Hauptantrieb und Spindeln Hauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 % Ausstattung: 2 vertikale Spindeln Werkzeugwechsler und Peripherie o    2 automatische Werkzeugwechsler o    Kühlschmierstoffanlage o    Späneförderer o    Ölnebelabsaugung o    2 separate Hydraulikaggregate Betriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler

Code: 0460 Brand: SAMCO Model: LL 3000 Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600

bar material dia.: max. 85 mm bar length: 3000 / 3500 mm No. 0703 1 used bar feeder TRAUB 3D / E85 / 3000 Z Bar diameter : max. 85 mm Bar length: max. 3000 mm UNPROOFED / As Spare Part The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.

snelle verplaatsing voor langsbeweging Distance between centers: 3000 mm Swing over bed: 630 mm Swing over cross-slide: 350 mm Diametre of main spindle bore: 80 mm Power on main spindle: 13 kW Number of speeds: 10 > 1250 rpm Digital screen: Heidenhain Length: 4950 mm Width : 1780 mm Height: 1490 mm Weight: 5,6 ton

turning diameter over bed: 4000 mm turning diameter over slide rest: 3500 mm turning length: 30000 mm centre height: 2000 mm workpiece weight: 160 t bed width: - mm bed height over floor: - spindle turning speed range: 0,5 - 80 U/min main drive motor: - kW faceplate diameter: - mm Control: Siemens 840D total power requirement: - kVA weight of the machine ca.: 160 t 2006 modernized/Overhauled and equipped with: - 4-guides bedway - CNC Control Siemens 840D - Face Plate - Counter Stay The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. swing over bed: 615mm, max. swing over cross slide: 345mm, distance between centers: 3000mm, spindle bore: 70mm, spindle taper: MT5, forward speed steps: 18, forward speed range: 14-750rpm, reverse speed steps: 9, reverse speed range: 21-857rpm, standard longitudinal feed: 32 steps, 0.1-1.42mm/rev, standard cross feed: 32 steps, 0.03-0.46mm/rev, fine longitudinal feed: 8 steps, 0.048-0.089mm/rev, fine cross feed: 8 steps, 0.015-0.028mm/rev, coarse longitudinal feed: 32 steps, 1.52-2.28mm/rev, coarse cross feed: 32 steps, 0.48-7.2mm/rev, rapid traverse longitudinal: 6m/min, rapid traverse cross: 2m/min, metric threads: 54, range: 1-240mm, Whitworth threads: 37, range: 1-28threads/inch, compound slide travel: 230mm, cross slide travel: 400mm, distance from spindle center to tool holder: 32mm, tool dimensions: 30x30mm, tailstock quill diameter: 100mm, tailstock taper: MT5, quill travel ...

turning diameter:800 mm turning length:2965 mm max. turning dia. over saddle:520 mm spindle bore:92 mm turning speed range:3 - 1800 U/min spindle head:Größe 11 total power requirement:37 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor

turning diameter:626 mm turning length:3000 mm Turning diameter:600 mm spindle bore:100 mm spindle turning speed range:2800 U/min weight of the machine ca.:18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Specifications: Dosiebunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) Can be used in cable recycling for granulator filling, granulate processing, plastic films, wood chips, etc. Features -Content: 3 qbm -Ruehrwerk, drive: 5.5 KW -Fuellstand control sight glass -Adjustable machine feet -Dosing screw discharge 200 mm diameter, speed control of the screw via frequency control at the control cabinet via Poti, Drop height 700 mm, screw drive power: 0.75 KW Optional with conveyor belt for filling Dosing Bunker DB 3000 Dimensions: 1.50 x 2.50 x 2.75 (L x W x H) For Cable Recycling by the Cutting Mill filling, PVC Granulate, PP or PPE, and many more Amenities -3 qbm -Agitator, Drive: 5.5 KW -liquid level indicator -adjustable machin feed -metering device for the spiral conveyer, Diametre: 200 mm, speed control for the spiral conveyer by Frequen ...

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

Kartonlaengslauf 10 to 25 cycles/min Hot glue manufacturer: servant

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Machine type: friction washer / friction separator Manufacturer: NEUE HERBOLD GMBH Year of manufacture: NEW rotor diameter: 560 mm working length: 3000 mm Drive: 30 kW for integration in recycling processing plants - to wash plastic materials such as film flakes, foil chips, granules, PET bottle-flakes,...

FOR SALE ... WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT TURKEY. TO WHOM IT MAY CONCERN WE VE WESTFALIA GEA BILGE MASTER 3000 USED COMPLETE SYSTEM AT OUR STOCK . PLS FIND DETAILS ON BELOW TYPE BILGE MASTER 3000 SERIAL NO 9018-317 2007 YOB CERTICATE NO 330/241 WHEEL MARKET NO 0736 Separator TYPE WSD18-01-037 SER NO 9018-317 2007 YOB SYSTEM HAS COMPLETE OIL MONITOR PANEL / BILGE ALARM / CONDENCER ETC ETC BILGE MASTER 3000 READY TO TRANSPORT AT IZMIR TURKEY. IF YOU HAVE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US.. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

4 sides trimming line

Height 1350 Width 1700 mm Length 700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Chamber dimentions 500 mm

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...

New SGB transformers 1000KVA power voltage: 10/20kv - 690V SWITCHABLE other services and voltages also available easy questions! SEE photos was still never used available now 6 PCs of nationwide cheaper delivery issues is always available: Mr Serhan 01727265324 or e-mail: Transformatoren@gmx

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm