l beh 3000 used for sale

Kaeser compressed air tank 3000 liters approx. 3 meters high

Used stainles steel mixer with dispersing agitator, capacity: 3000 liters.

gebr. Guillotine shears, Helmut Lotze, type 205.3000x16, built 1992 Working width: 3040mm Max. sheet thickness: 16mm Stand width: 3040mm Throat: 200mm Stroke width: 1000mm Motor power: 45kW Stroke rate: 22/min.

General SKU305U624 MakeStarick Fördertechnik GmbH TypeLS3 / BAV1200 No.1821.2694.01.05 Year of construction2005 LocationBarneveld Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume3000 Ltr. Pressure1 Bar Specified Features - Silo Silocheck Closedcheck Capacity3 m³ Diameter2000 mm Cylindrical height500 mm Conical height1310 Conical bottomcheck Dished topcheck ManholeDN300 InletDN200 Top connectionsDN600, DN500 Outlet with vibro bottom0,80 kW, 400Volt (EX) OutletDN200 Half coil jacketedcheck MaterialStainless steel 1.4301 (304) With jacketcheck General Total height4,42 m Weightca. 500 kg CEcheck ATEX designedcheck Extra SpecificationsThis silo comes complete with dust filter and rotary valve.Paints & coatingsPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDet ...

Lippert belt conveyor GF 30000-750-600 RA2269 Technical data: Conveyor length (NL): 30000 mm frame width (NB): 750 mm belt width (GuB): 600 mm Overall height (BH): 120 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1992 condition: good (used) Conveying length in mm: 30000 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0 ...

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,660 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02 x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 06 x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 24 x Shelf Racks, Used Suitable for smooth stands Material colour: sendz.  ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 47,330 mm Number of fields per row of shelves: 29 pcs. The scope of delivery includes: 30x Shelving rack stand, used Material colour: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 174x Shelves, used Material colour: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with the same. distributed load. 696x Shelf Racks, used Suitable for smooth stands Material colour: sendz.  ...

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 8,190 mm Number of fields per row of shelves: 05 pcs. The scope of delivery includes: 06x Shelving rack stand, used Material color: sendz. galvanized Finish: slotted Adjustment grid: 26.5 | 26.5 mm Frame profile dimensions: 31x60x0.88 mm Weight / piece: approx. 8.92 kg Incl. gravel bar and foot plates (Shelf stands are pre-assembled) 2,490 mm high 600 mm deep 30x Shelves, used Material color: sendz. galvanized f. Stand depth: approx. 600 mm Total width: approx. 1,600 mm Total depth: approx. 594 mm Height: approx. 30 mm Weight | Pcs.: approx. 8.12 kg max. load per shelf 75 kg, with equal. distributed load. 120x Shelf Racks, Used Suitable for smooth stands Material color: sendz. g ...

General SKU034F278 LocationBarneveld MakeLeiblein GmbH Hardheim TypeIR-Verdampfer IR-T 1200-3000 E No.104-0001 Main Features MaterialStainless steel Motor0.37 KW Surface11 m2 Specified Features - Roll dryer Roll dryer:Infrared-drying drum/evaporator: (1x) Roll surface11 m2 Roll sizesdia. 1200x3000mm With knife dischargecheck With variable speed drivecheck Roll speed0,1-1,0 Rpm With jacketcheck Motor0,37 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction2003 Mounted on frame, Electric heating (27x 8 KW) With switchgear(as is) Floorspace5,6x1,5 M Total height2,6 M Weight3500 KGPowdered foodsStarchBiotechnologyFeed additivesDiscountCosmeticsFood additivesSugarDairyDyes & pigmentsRoll dryersAPILeibleinIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndus ...

General SKU345S758 LocationBarneveld MakeHinke Tankbau GmbH (AT) No.8292 Pressure Working pressure3.5 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume3000 Ltr. Motor15 KW Specified Features - Bioreactor Reactorcheck Capacity3000 Ltr (4140 Ltr) Vessel sizesDia: 1600 x1600mm Dished bottomcheck Dished top sidecheck ManholeDN500/400 Top connectionsDN200, DN150, DN100, DN80, DN50 OutletDN50 With jacket135+22 Ltr Max. temperature-25/200°C With paddle stirrer:SDR 35-06 S: Motor5.5 KW, 690/400 Volt, 1500rpm (EExdeIICT4) Speed mixing shaft92 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti) General Year of construction2000 Floorspace2,2x2,2m Total height3m Weight1800kg ATEX designedcheckPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRub ...

General SKU100S393 MakeOostendorp No.3812 Year of construction1989 LocationBarneveld Pressure Working pressure4 Bar Main Features MaterialStainless steel Volume3000 Ltr. Motor0.55 KW Specified Features - Stirring vessel Reactorcheck Capacity3000 Ltr. Dished top sidecheck OutletDia. 45mm With jacket(230 Ltr.) Speed mixing shaft59 Rpm With jacketcheck Stirring vessels Closed stirring vesselcheck Capacity3000 Ltr. Vessel sizesDia. 1200x2700mm Dished bottomcheck Dished top sidecheck OutletDia. 45mm With jacket(230 Ltr.) Max. temperature110°C Motor0,55 KW, 220/380 Volt Speed mixing shaft59 Rpm MaterialStainless steel General Floorspace1,7x1,7 m Total height4,1 mPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersSolventsStirring vesselsDiscountDetergent & surf.Other pharmaceuticsCosm ...

General SKU227T227 LocationBarneveld MakeNautamix Main Features MaterialStainless steel Volume3000 Ltr. Motor5.5 KW Specified Features - Conical mixer Conical mixercheck Capacity3000 Ltr. Largest cone diameter2200 mm Cone height3600 mm Manholecheck With stainless steel armcheck Motorcheck Cantilevered screwdia. 300x3200 mm MaterialStainless steel General TypeSerie A842351 No.16341 Total height3,8 mPaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsConical mixersMinerals & inorganicNautamixIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemica ...

max. wheel diameter: 3000 mm gear width: 500 mm max. module: 25 / 40 spindle turning speed range: 250 U/min feed speeds: max. 4000 mm/min faceplate diameter: 2000 mm table bore diameter: 700 mm table turning speeds: 51 U/min power capacity - milling spindle: 53 kW drive motor for milling spindle: - kW axial adjustment: 1200 mm milling head swivable ca.: +/- 45 ° control: Siemens 840D total power requirement: - kW weight of the machine ca.: 55 t - CNC Control Siemens 840D - Internal Hob Head IFK - External Hob Head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PRESSURE TRANSMITTER MODEL : MBS 3000-2011-A1AB08 OUTPUT 4-20 MA PRESSURE 0-10 BARG G 1/2" Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Lagun X: 3000 - Y: 1000 - Z: 1200 mm CNC Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1200 mm Dimensions clamping space- table: 3100 x 800 mm Power on spindle: 22 kW Type of millinghead: BT-50 Max speedrange: 50 > 3000 rpm (840 Nm) Control: Heidenhain iTNC 530 Power needed (KVA): 35 kW Length : 8744 mm Depth: 3765 mm Height: 3352 mm Weight: 14 ton

Used OMB labelling machine 4 heads 3000 BPHTechnical Specifications & Performance DataThe OMB ET 3000 R is a compact rotary labeling machine engineered for precise self-adhesive label application in beverage production and industrial packaging environments. Manufactured in 2016, this second hand unit combines an electronic cam architecture with motorized head height control to deliver consistent, repeatable labeling performance. It is supplied with one complete format set for 0.75L Bordeaux glass bottles and reaches speeds up to 3,000 bottles per hour, making it a strong fit for quality-focused wineries and specialty beverage producers seeking dependable throughput in a used bottling line.Manufacturer: OMBModel: ET 3000 RYear: 2016Production speed: up to 3,000 bphConfiguration: 4-position rotary carousel with electronic camLabeling technology: 2 self-adhesive (PSL) stationsIncluded forma ...

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Hydraulic radial engine manufacturer Calzoni MR. 3000-F1N1N2S2NX 0401 / 46528, 656592 250 bar Used Husky injection moulding machine, type GL225RS60/50

electric motor, three-phase motor -Power: 0.18 kW -Electric motor: 3000 rpm -Voltage: 220/380 V -Shaft: Ø 14 x 30 mm -Design: B5 -Dimensions: 250/144/H165 mm -Weight: 6.3 kg

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Tip height: 355 mm Center width: 3000 mm large circulation Ø over bed/recess/bed slide: 715/790/520 mm Spindle bore: 86 mm Spindle holder according to DIN 55027: Gr. 11 Tailstock quill taper: MK 5 21 spindle speeds: 5.6 - 560 rpm 42 feeds longitudinal/flat: 0.09 - 5.6/0.045 - 2.8 mm 22 Whitwort Thread: 2 - 28 Gg 28 metric thread pitches: 1 - 14 mm 27 module thread pitches: 0.25 - 3.5 module 32 module threads: 4 - 56 module 32 Diametrical Pitch Threads: 8 - 112 DP Drive motor, pole-switchable: 380 V, 7/11 kW Weight approx.: 7 t Approx. space requirement: 6000 x 2300 mm

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 760 mm turning length: 3000 mm swing diameter over bed slide: 520 mm centre height: 380 mm reus: 17 (7,5 - 1015) U/min tail stock: MK6 quill stroke: 225 mm diameter of quill: 105 mm spindle bore: 132 mm feed: längs 0,039 - 18 mm/min feed: quer 0,02 - 9 mm/min total power requirement: 15 kW weight of the machine ca.: 4700 kg dimensions of the machine ca.: 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

Make : Roversi Tank Volume :3000 liters Cream Capacity : 1000 Litres to 1500 Litres Double jacketed Kneading Rolls inside the barrel Control panel Stainless steel production area Skid Mounted 2 Door Safety closer See through glass Fully Refurbished on order Manufacturer Roversi Model 3000 L

SU 125/3000 Swing over the bed 1250 mm Circular diameter above the 940 mm Tip distance 3000 mm Diameter of clamping plate 1250 mm Maximum workload of the workpiece 6000 kg Machine weight approx. 10,000 kg Delivery items of the accessories : - facing head 710 - 3-jaw chuck 630 - steady rests

Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10366 Manufacturer: MONFORTS Year of construction: 2000 Type of control: CNC Control: EURO TURN Storage location: Halberstadt Country of origin: Deutschland Machine length: 5000 mm Machine width: 1970 mm Machine Height: 1800 mm X stroke: 370 mm Z - stroke: 2880 mm Chuck diameter: 200/250/315 mm Centre Distance: 3040 mm Spindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 5 m / min Rapid Travel Speed Z-Axis: 10 m / min Circumferential diameter over radial slide: 350 mm Max swing diameter: 720/630 mm travel of the cross slide: 375 mm Spindle head max. passage for violent material: 68 mm Spindle head max. passage for bare material: 70 mm Tailstock outside diameter of the quill: 110 mm Tailstock maximum quill stroke: 210 mm Tailstock inner cone: MK6 Type Further information: Additional lubricating oil tank approx. 6l

Ref. -No.: 10365 Manufacturer: MONFORTS Year of construction: 1997 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tai ...

recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/2W/3000K -Type: A1001628 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg

recessed light, LED spot -Manufacturer: SBF, recessed luminaire LED spot 110V/5W/3000K -Type: A1000573 -Connection: LED connector -Quantity: 1x light available -Dimensions: 100/90/H40 mm -Weight: 0.2 kg

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

BLM ADIGE fiber laser Year 2010 3000x1500 3000W loading/unloading Lantek License Hours about 20 thousand sheet thickness 20 mm. Iron and 8/12 Stainless Steel

Load Weight Shelf: 20000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 10000 kg Loading weight per level: 2000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 24000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 6 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,7 x 2,55 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 1500 mm stroke height: 1900 mm weight max. in kg: 3000 kg total power requirement: 1,5 kW stroke speed - idle stroke upwards: 55 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,650 t dimensions of the machine ca.: 2,2 x 1,5 x 0,3 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 14000 kg Loading weight per level: 2000 kg Number of load levels: 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: 3,8 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.