l beh 3000 used for sale

A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal.

Key data: 3000 mm, 4 mm, 800 mm

Hydraulic Shear SAGITA BEYELER Capacity: 3100 mm x Max thickness 4 mm Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T

A complete liquid egg and egg product pasteurization plant by Südmo/KMA is available. Main processes: egg breaking, filtration, pasteurization, cooling, homogenization. 1) Sanovo Type 3000 egg breaking machine, year of manufacture: 1991. 2) Südmo/KMA K21-FS/4235 pasteurization plant, year of manufacture: 1996, medium: liquid egg, throughput: 1500l/h, temperature profile: 15°C/64°C/6°C, cooling medium: ice water, ice water temperature: 1°C, ice water demand: 7500l/h, heating medium: hot water, hot water temperature: 65°C, hot water demand: 5000l/h, heat recovery: 70%, holding time: 360s. 3) APV Gaulin homogenizer. 4) Terlet process tank, volume: 10m³. 5) Clivet WSAT-XIN 30.2 water chiller, year of manufacture: 2018, refrigerant: R-410A, refrigerant charge: 9kg. Including pumps, agitators, tanks and additional accessories. Documentation available. An on-site inspection is possible.

Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Weight kg 3500

This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information.

- Optional chuck 1200 mm - 2 Axis RSF Digital read out - Conical turning attachment - Spindle bore 130 mm - Central lubrication

- Chip conveyor - SMW 315 3 chuck - 2 x Radial live tooling holders - 2 x Axial live tooling holders - Spindle bore 80 mm - BMT-Tooling system - Tool measuring probe - Spindle hours 6960 / 6270 Running hours

- CNC Dresser KW with Siemens 840D new in 2002 - HeidenHain measuring scales - Siemens Servo engines - Crankshaft and External grinding - Large steady rest package - Large stone and flanch package

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

CNC lathe Okuma LB 3000 EX MC 500 Control: OSP-P200L Year of Make: 2008 Internal machine no. 69 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed 530 mm Speed: 4,200 rpm Tool turret 12 places (driven) C-axis 0.001 degrees Equipment: - One touch IGF - Chip conveyors - Touchsetter - 3-jaw chuck Kitagawa B-210 - NC tailstock

Inv. Num. : 9324 Type: 3000x2100 Producer: CYBERTRONIC Robotic Created: 2022 Parameters: Work table length: 3000 mm Work table width: 2100 mm Number of Spindles: 2 pieces The offer includes: Blower/suction unit Dust Extraction OP-2200 Piston compressor MK 103-90-3M PC and software for CNC control Cables Basic accessories

Used bar feeder, Irco Breuning SiMag 50.1 - 3000, very good condition. RAL 7035, 2014;

Round and long moulders, Weight range approx. 350 - 2100gr Hourly output up to approx. 2000 pcs Ribbon Circular Knitted Length: approx. 280cm Adjustable trough inclination Long moulder up to max. product length 50cm Knitted board approx. 120cm long Stainless steel version incl. 2 flourers Wheat mixed doughs (90/10) to rye mixed doughs (90/10). Dimensions [W x H x L] 1,060 x 2,130 x 3,630 mm Connection 400V 5.5KW, 32A plug

Slitting saw CENTAURO SL 3000 Cutting Length 3400mm Cutting width max 600mm Cutting height max 160mm Saw size 550mm Main motor power 11kw Feed speed up to 80m/min Machine dimensions 5285x1532x2150cmH Weight 1500kg Year of manufacture 2001 Net price

Steiger work platform 30m Type OMME 3000 RBD Year of construction 2006 Rubber tracks Three-cylinder diesel engine 995 h Electricity – grid connection Total running time 2709 h Weight 4000 kg Length: 8.5 m Width: 1.2 m Damage: Mounting basket and battery box . Right battery is missing. The machine cannot be used in this way. Loading free of charge. Private sale from the Hanover location Price as it stands: 12,000,-- euros

sheet width: 3000 mm plate thickness: 4 mm work height max.: 900 mm : 450 mm total power requirement: 5,5 kW weight of the machine ca.: 4800 kg dimensions of the machine ca.: 4250 x 1500 x 1850 mm Equipment: - electric bending angle adjustment - electric upper beam adjustment - foot switch - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3020 mm plate thickness: 5 mm distance between columns: 3020 mm Control: Simatec OP7 stroke: 450 mm back stop - adjustable: 2000 mm work height max.: 900 mm total power requirement: 22 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operators manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base ...

x-travel: 30000 mm y-travel: 3600 mm z-travel: 1900 mm Control: Heidenhain type: TNC 530 i milling head -swivable: CNC turning speeds: 4000 U/min conus taper: DIN 69871+AD mm Feed: 10000 mm/min spindle drive: 46 kW Rapid movement: 25000 mm/min chip conveyor: 2 St. coolant: filter unit: Plate area: 31000x2500 mm total power requirement: 85 kW weight of the machine ca.: t dimensions of the machine ca.: m Soraluce No. 5619 Load hours 9332 On-time hours 27960 Panel array consists of: 1 panel 7000x2500 mm 4 panels 6000x2500 mm Optional: 4x clamping angles Tool package Clamping table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessor ...

turning diameter: 626 mm turning length: 3000 mm control: Siemens type: 840D spindle passage: 100 mm Turret 12-fold, 12 stations: turning speeds: 2800 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: m Machine overhauled in 2003 and equipped with a Siemens 840 D - NC steady rest - 400 mm power chuck The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your  ...

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3300 mm total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 6000 kg width: 2500 mm depth: 1250 mm Maximum: 6000 kg Minimum: 40 kg Deviation: 2 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3000 mm bending angle max.: 130 ° plate thickness: 10 mm bending angle max.: 130 ° total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are intere ...

A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible.

A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating h ...

turning diameter: 650 mm turning length: 1500 mm control: OSP-P300SA -L Main Spindle:: main spindle speeds:: 4200 spindle motor: 32/22 kW diameter of main spindle: A2-8 mm travel -x axis: 644 mm travel -z axis: 1600 mm travel -y axis: 300 (+/- 150) mm rapid traverse: 50 / 40 / 50 m/min milling spindle: 12.000 U/min spindle motor: 22/15/11 kW spindle bore: 130 mm c-axis: 360 ° b-axis: 240 ° 2nd Spindle:: Subspindle Power: 22,4 kW spindle turning speed range: 5000 U/min W-axis (spindle longitudinal): 1584 mm spindle nose: A2-6 total power requirement: kW CNC turning & milling center - equipped with: - CNC control OSP-P300SA-L THINC Control, Full 5-Axis, - Contouring B-Axis Milling Spindle (12,000 RPM, CAPTO C6) - Y-Axis - LOWER TURRET (STATIC) - BIG BORE (3.1” BAR CAPACITY – MAIN SPINDLE) - 2-SPEED GEARBOX - ROYAL QG-80 COLLET CHUCK (MAIN) - ROYAL QG-65 COLLET CHUCK (SUB) - C-AXIS  ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed range- 2 ...

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc.

plate thickness: 5 mm cutting length: 3000 mm rear stop: 750 mm total power requirement: 7,5-10 kW weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bucher Press HP 3000 "Bucher Press HP 3000 Year of manufacturing: 1982 Suitable for processing apples, pears, grapes and other fruits. Capacity: approx. 2–3 tons of apples per hour, depending on product and operating conditions. The machine was operated in a cider production facility in Germany. The machine is no longer in production."

Hammer mill, auxiliary mill, granulator, shredder, granulate mill, rotor mill, recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective de ...

table length: 3000 mm table width: 1500 mm table height (lateral area): 100 mm weight: 726 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale - Including 8x basic equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 3000 mm Working width: 360 mm roll diameter: 60,0 mm weight max. in kg: 900 kg height adjustment: 620 - 1055 mm weight: 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment The data for this ad was  ...

pressure: 3000 t chamfer lenght: 14000 mm distance between columns: 10500 mm Control: CYBELECCNC 7000 m. Grafik table width: 1000 mm stroke: 1300 mm min./max.distance between table and ram: 1800 mm controlled axis: Y1, Y2, X1, X2 total power requirement: kW weight of the machine ca.: mind. 465 t dimensions of the machine ca.: 14600 x 4200 x 7200 mm - throat depth: 700 mm - controlled axes: Y1, Y2, X1, X2 - Dimensions (length x width x height): - Foundation depth for table: 3400 mm - Foundation depth for stand: 1700 mm - Dimensions of the individual components for transportation: - Table: 14020 x 4270 x 910 mm, weight approx. 125 tons - Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons - 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each - Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons - 2 pcs. Container 40” for cylinder, electrics and various attach ...

pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm weight of the machine ca.: 9.000 kg dimensions of the machine ca.: 4000x2100x2700 mm Accessories/Equipment: - 2 support arms in front of the machine - Lazer Safe - 4 stop fingers - Foot switch - Delem DA 75 W control unit - Side safety doors - Amada tool holder - Curving The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 3100 mm distance between columns: 2600 mm Control: Cybelec VisiTouch 24 throat: 500 mm dayligth: 500 mm stroke: 300 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 18.500 kg dimensions: 3900 x 1970 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1075 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm weight: 1425 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4200x2200x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1100 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 3600 x 2000 x 2900 mm weight: 11.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm Standard equipment: - Cybelec CybTouch 15 Windows CNC control - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system, model GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Optional equipment: - 2 x front support tables - 2 x stop fingers - Wila Style hydraulic upper die clamping - Wila Style hydraulic die clamping - CE Standard compliance YouTube video links: https://www.youtube.com/watch?v=u3sBJxJ3M8g https://www.youtube.com/watch?v=MmZtAJArHA0 https://www.youtube.com/watch?v=mybVan1S2pk The data for this ad was created with ModulMWS - the software solution of LogoT ...

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.