l beh 3000 used for sale

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

Dimensions (L/W/H): 0x0x0 mm Weight: 870 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1680x930x1200 mm Weight: 350 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x950x1260 mm Weight: 400 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. working lenghts 3000mm Max working square 220x220mm Max. working diameter 450mm (when wood round) Stroke axis X 3800mm Stroke axis Y 460mm (plus 230, minus 230) Stroke axis Z 510mm Stroke axis Y2 360mm (turning) Stroke axis Y3 360mm (milling) Stroke axis Y4 360mm (sanding) Stroke axis B (rotary +/- 90°) Power: Axis A (rotary main motor) 22,2 kw 0-1500 upm Axis Y2 11kw 1000-4500 upm Axis Y3 11kw 1000-6000 upm Axis Y4 2,2 kw 3000 upm max. 24.000 upm Electrospindle (HSC) 12 kw max. 24.000 upm Toolchanger 6 positions HSK 63 F Total installed power 70 kw Weight approxm. 9,5 tons - Producer Intorex - Type TMC 3000 - Year of construction 2010 - Location Germany

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

power capacity: 30/37 kW volt: 380 V ampere: 70/78 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3000 mm width: 2000 mm height: 250 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3 2 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

Plasma cutting machine Manufacturer: Swift Cut Type: Pro 3000 Year of Make: 2022 Travel paths X/Y: 3,000 x 1,500 mm Power Source: Hypertherm Powermax65 SYNC Sheet thickness mild steel max.: 16 mm Sheet thickness stainless steel (VA) max.: 12 mm Sheet thickness aluminium max.: 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm

CNC lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of Make: 2013 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: VDI 40 Equipment: - Chip conveyors - Touchsetter - OneTouch IGF - NC tailstock - 3-Jaw Power Chuck Forkardt 3QLC/K250

Offer 26028 Technical data: - Max. working width 3040 mm - Max. material thickness ST 37 4 mm - Bending process as fully automatic, or - Semi-automatic workflow can be pre-selected - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Max. lifting height of the upper beam 350 mm - Lifting height of the upper beam can be electronically preselected - Adjustability - bending beam 125 mm - The lower beam 125 mm - Upper bolster drive 400 V / 4.0 kW - Bending beam drive 400 V / 5.5 kW - E. footswitch - Space requirement approx. W 3950 x H 1600 x D 1200 mm - Weight approx. 4800 kg

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Delem DA 66S stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 10.000 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 3100 mm distance between columns: 2600 mm Control: Cybelec VisiTouch 24 throat: 500 mm dayligth: 500 mm stroke: 300 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 18.500 kg dimensions: 3900 x 1970 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injection molding machine Krauss Maffei CX 650-3000 BJ 2009

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information.

This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine.

This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.

This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information.

This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information.

This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

pressure: 220 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 3600 x 2000 x 2900 mm weight: 11.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 200 mm dayligth: 480 mm : 200 mm/s bending speed: 0-10 mm/s : 120 mm/s total power requirement: 7,5 kW dimensions: 3600 x 1800 x 2700 mm weight: 8.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.553 kg Product description: Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet. Welding table: - High-quality steel S355J2+N + plasma nitriding 200 - Holes surface 100x100 mm grid - Corners, edges, and holes 45° chamfered - Holes side panel in diagonal grid - Construction reinforced by ribs - Includes basic foot equipment (working height 850 mm) Accessories: - 6 x professional nitrided screw clamps - 12 x quick-release bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping angle 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided - Allen key size 6 - Brush Ø 30 with ...

This machine tool was manufactured in 2016. The BREUNING SIMAG 80.1 R 3000 features a multi-channel loading magazine IV, 8 guide channels with high-performance oil flow, and PLC control with an integrated touch screen terminal. It supports material diameters of 40-80 mm and lengths of 1500-3000 mm. Ideal for handling heavy loads up to 850 kg. A great opportunity to buy this BREUNING SIMAG 80.1 R 3000 machine tool. Contact us for further details regarding this machine tool.

This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information.

This DR. HOCHSTRATE SBM 3000/6 was manufactured in 2018. It features a PLC control system, operates on 400/50 V/Hz with a power of 7.5 kW, and handles sheet bending up to 6 mm thick and 3000 mm wide. It includes hydraulic clamping and programmable rear stops. Consider the opportunity to buy this DR. HOCHSTRATE SBM 3000/6 Folding Machine. Contact us for more information.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1100 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special Item: Messeeinsatz table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.400 kg Trade Fair TABLE Slight signs of wear on the surface Welding table: - 6 legs - basic equipment 650 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Side cheek made of high-quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Drilled holes Surface in diagonal grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Operating hours: 132‘186 h Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Screw diameter (Ø): 55 Air valves: 4 Controllable -With dosing system -Handling robot Wittman, available as an option upon customer request

General SKU379X951 MakeMonTech LocationBarneveld CEcheck TypeD-RPA 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Electric capacity230 V MaterialStainless steel Information No.090 KA 666 Year of construction2019 With switchcheck Floorspace0,70 x 0,55 m Total height1,52 m Extra Specifications Machine type: MonTech D-RPA 3000 Dynamic Rubber Process Analyzer (RPA) / advanced rheometer for rubber &: polymers (QC and R&:D). Use: measures viscoelastic and curing behavior (e.g., G’, G’’, tan δ, viscosity, cure kinetics) under controlled temperature, strain and frequency. Temperature range: ambient to 232 °C. Frequency range: 0.001–100 Hz. Strain range: up to 360° (very wide dynamic range). Torque range: up to 250 dNm. Sample volume: approx. 4.5 cm³ (sealed biconical die system). Utilities (typical): compressed air min ...

CNC lathe Okuma LU 3000 EX-M 2PC-600 Control: OSP-P300L Year of Make: 2017 Turning length: 600 mm Turning diameter: 340 mm Swivel diameter over bed: 580 mm Speed: 50 - 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (all places driven) B-turret: 8 tool positions Equipment / Accessories: - Chip conveyors - One Touch IGF - Tool monitoring system - Tool measuring device - Reinforced coolant pump 8 bar - 3- Baking Chuck Kitagawa B208

General SKU379X1446 MakeMonTech LocationBarneveld CEcheck TypeABR 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine MaterialStainless steel Viscosity metercheck (Abrasion Tester) Motor230 V Speed40 rpm Information No.400 KA 666 Year of construction2019 With switchcheck Floorspace0,74 x 0,30 m Total height0,32 m Weight60 kg Extra SpecificationsRotary drum diameter: 150 mm Roll length: 460 mm Equipped with a quick clamp for test specimens. Peripheral speed of the drum with abrasion sheet: 0.32 m/s. Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU379X946 MakeMonTech LocationBarneveld CEcheck TypeCP 3000 Pressure Working pressure10 Bar Main Features MaterialStainless steel Specified Features - Cutter Cuttercheck MaterialStainless steel Information No.210 MI 687 Year of construction2021 Floorspace0,90 x 0,70 m Total height1,085 m Weight225 kg Extra SpecificationsLarge rubber and Polymer Bale Cutter Operation / throughput: up to 12 cuts/min (cutting &: lifting speed adjustable) Max cutting width (bale width): 520 mm Max cutting height (bale height): 240 mm Cutting force (adjustable): 0.6 t @ 2.0 bar up to 4.6 t @ 10.0 bar Knife: hardened, precision-ground: monoblock cutting knife (tool steel, fully hardened) Material infeed: rear roller conveyor, total length 750 mm Safety: pneumatic two-hand operation (anti-tiedown) + transparent safety shields Utilities: compressed air min. 2 bar (5 bar recom ...

General SKU379X1442 MakeMonTech LocationBarneveld CEcheck TypeDisperTester 3000+ Main Features MaterialMild steel Specified Features - Viscosity test machine Viscosity metercheck (dispertester) Electric capacity230 V MaterialMild steel Information No.318 KA 666 Year of construction2019 With switchcheck Floorspace0,22x0,40 m Total height0,18 m Weight25 kg Extra SpecificationsStandards Compliant with ISO 11345:2006 and ASTM D 7723 (dispersion analysis) Optics Magnification: 100× Field of view: 12 mm × 3.5 mm Agglomerate measurement range: 1 µm – 250 µm Image resolution: 10 MP with telecentric optics Focus: automatic or manual Illumination: controllable multi-directional LED Mechanical Precision scanning with linear two-stage system enabling multiple readings per sample Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech ...

This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine.