134,065 used machines on RESALE, but how to find them? Machine Search
Key data: 55 KW, 300 1/min
Herford engine, 1-cylinder, horizontal, 300 rpm, 75 hp, overhauled
Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...
Key data: 2640 KW, 3300 kVA, 400 V
STAMFORD Synchronous Alternator LVSI 824 F2 3300 KVA 400 V 4763 A 50 Hz, 1500 1/min. Tech. Equipment: - 2 sets of Winding PT100 - AVR MA325, PFC-3 COMPLETELY OVERHAULED, restored, windings impregnated
Key data: 330 , 413 , 400
Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 3 m² Weight approx.: 2.500 kg There is also an identical system as a spare parts dispenser as an option for an extra charge. The control panel is missing here. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure: 10 bar Motor: 15 kW Free air delivery: 2,22 m³/min Measurement (WxHxD): 1815 x 1365 x 720 Weight: 380 kg Compressed air connection: 1
Pressure: 13 bar Motor: 75 kW Free air delivery: 10,4 m³/min Measurement (WxHxD): 2780 x 1990 x 1490 Weight: 2410 kg Compressed air connection: 2 1/2
Key data: 1135 mm, 2000 mm, 700 1/min
Stock number: 3915 CNC LATHE Manufacturer: PROKING, Type: LC4506020 Machine NO.: 13021056, Year of manufacture: 2011 Specifications: Max. turn. About Bed 1135 mm DIA. Turning length 2000 mm Turning over planing slides 760 mm dia. Main motor power 30/37 kw Main spindle speed range 7-700 rpm Spindle bore 153 mm dia. C Axes Tool turret with 12 VDI stations Max. workpiece weighted 3500 Whitout steady Kg Control FANUC 0iTF Fabr. Operating hours spindle 3032 hours Accessories: Hydraulic Main Centering Chuck 800 mm dia. Chip conveyance. 2 pcs Tailstock Length: 5720 mm, Height: 2520 mm, Width: 2766 mm, Weight: 12,000 kg
Pressure: 10 bar Motor: 7,5 kW Free air delivery: 1,14 m³/min Measurement (WxHxD): 1720 x 1320 x 745 Weight: 370 kg Compressed air connection: 1/2
Free Gravity Mixer Drum in stainless steel Angle adjustment of the drum and emptying possible via lateral lever with grid Volume: approx. 140 litres Voltage: 400V, direction of rotation reversible via changeover switch Weight: approx. 120kg Drive via gearbox, no sprocket, therefore almost indestructible Control box in the machine stand with two timers, possibly an interval control Lid closes tightly and can be removed without tools Machine stand has rust attachments and should be painted Video about test run available
Pressure: 13 bar Motor: 22 kW Free air delivery: 2,74 m³/min Measurement (WxHxD): 1610 x 1380 x 915 Weight: 635 kg Compressed air connection: 1
Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,668 m³/min Measurement (WxHxD): 1858 x 1604 x 760 Weight: 392 kg Compressed air connection: 1/2
Pressure: 10 bar Motor: 1,3 kW Free air delivery: 0,162 m³/min Measurement (WxHxD): 1510 x 1210 x 580 Weight: 157 kg Compressed air connection: 1/2
Pressure: 7,5 bar Motor: 22 kW Free air delivery: 3,37 m³/min Measurement (WxHxD): 1610 x 915 x 1380 Weight: 635 kg Compressed air connection: 1
Pressure: 10 bar Motor: 0,65 kW Free air delivery: 0,081 m³/min Measurement (WxHxD): 1260 x 1100 x 570 Weight: 133 kg Compressed air connection: 1/2
Pressure: 7,5 bar Motor: 22 kW Free air delivery: 3,37 m³/min Measurement (WxHxD): 1610 x 915 x 1380 Weight: 635 kg Compressed air connection: 1
Key data: 800 mm, 650 mm, 550 mm
Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...
Pressure: 10 bar Motor: 0,65 kW Voltage: 400 Volt / 50 Hz Free air delivery: 0,081 m³/min Measurement (WxHxD): 1260 x 1100 x 570 Weight: 133 kg Compressed air connection: 1/2
Pressure: 7,5 bar Motor: 55 kW Voltage: 400 Volt / 50 Hz Free air delivery: 9,81 m³/min Measurement (WxHxD): 2100 x 1720 x 1200 Weight: 2030 kg Compressed air connection: DN 65
Key data: 400 KW, 570 kVA, 400 V
Dear Ladies and Gentlemen, We hereby offer the following a MAN CHP in a container for rent! Year of construction 2014 Starts: 757 Hours: 11448 BH. Electrical Power: 400KW Thermal power 445 KW Dimensioning: Thickness: 100/140 mm insulation Length: 10000 mm Width: 2800 mm Height: 3200 mm Paintwork: Moss Green Contents in the container: MAN gas engine with generator on substructure Central heating Heat exchanger Switchboard Gas control unit Static power supply Exhaust silencer inside Auxiliary silencer above the container Insertion loss 65dBA in 10m Data recording Gas blower Combimac blue 65mbar gas pressure Gas Flow Meter Gas vacuum monitor Return temperature increase Exhaust gas heat exchanger with bypass Gas warning system Wind Vane Guardian Flame detector 1000 l each of used and fresh oil tanks with pump and hose reel Intrigued ...
Machine type: MIG/MAG welding machine Make Lorch Type Saprom 905 Connection voltage 3 x 400 volts Adjustment range 25 - 400 amps Duty cycle 40% ED at 400 amps 60% ED at 350 amps Current adjustment infinitely variable Cooling inverter through built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case, Robot interface and 5 mtr. VB Cable Wire Feeder Gearbox 4-Roller Gearbox Fuse 32 Amps Dimensions L x W x H 900 x 420 x 1,235 mm Weight 123.5 kg Age approx. 15 years Condition workshop tested, very good, incl. UVV workshop test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Li ...
YAWEI L6SK 6X2500 guillotine shears, built in 2012 in China, are designed for precision cutting of steel sheets with a maximum length of 2500 mm and a thickness of 6 mm. Technical specifications of YAWEI L6SK 6X2500 guillotine shears - maximum sheet metal thickness: 6 mm - maximum sheet metal length: 2500 mm - installed power: 13 kVA - power supply: 3x 400 V; 50 Hz
Inkjet printing system with Secure Track and Trace solution TTS. A marking and verification system for corresponding folding boxes (single or double-sided). Machine incl. PLC SIEMENS type Simatic S7-1200, Printer REA-Jet HR pro, etc.
Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992
Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 102.36.99.48.0596 Construction year 1996 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Condition machine working Control type B&R Electric connection 3x380V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos
New washer/dryer Manufacturer Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be washed, glassware and parts of bottling plants Chamber size: 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Version Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP
LASKA Angle Mixer Grinder Type: WMW 1680 Year of Make: 2000 Mincer: 160 mm Perforated Discs Ø 2 speeds Wolf motor: 26 / 34 kW 800 litre mixing trough Maximum mixing capacity: 650 kg 2 paddle mixing arms 2 mixing speeds (forward + backward) Hydraulic loading for 200 litre cutter wagons Hydraulic Discharge Flap Emptying auger Machine surface / screw / housing: stainless steel Tool trolley in stainless steel completely overhauled Shipping time: immediately
electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM 100 LT6 -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 28 x 60 mm -Protection rating: IP54 -Design: B3 -Dimensions: 365/250/H210 mm -Weight: 23 kg
The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.
Motor 5.5 kW/380 V/50 Hz, 2920 rpm, pipe connection D=250 mm
REF-2532 CARNITECH CT2611 "NORTHERN LIGHT" FISH FILLETING MACHINE Designed for cutting into two fillets and removing the backbones of salmon, trout and other fish species with a similar bone structure. It is characterized by perfect cuts, high yield percentage and a high processing capacity. Easy operation and cleaning. Can be efficiently operated by a single worker. Manufacturer: CARNITECH. Model: CT2611 NORTHERN LIGHT”. Year: 2001. Capacity: up to 20 fish/min (depending on product size). Product weight: 1.5 - 7 kg. Voltage: 3 x 400 V. Overall dimensions: length 2,000 mm; width 750 mm; height 1,700 mm. Weight: approx. 260 kg.
maximum number of results exceeded
please refine your search
