l beh 1000 used for sale

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

; Transport weight [kg]: 520

; Power [PS]: 185; Gross weight [kg]: 650; Engine: CATERPILLAR 3116 DIT

; Gross weight [kg]: 650; Engine: CATERPILLAR 3176; Emission class: Euro 0

Coil weight: 2 x 2 ton Material width: 310 mm Coil exterior diameter: 1300 mm Expansion range: 380 - 460 mm Weight of machine approx.: 2,5 ton

; Power [PS]: 345; Gross weight [kg]: 800; Engine: CATERPILLAR 3306

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The scope of delivery includes: 01x Steel panel, used Material colour: sendzimir galvanised Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Truss support: approx. 58 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 15,00 Kg Note: - The steel panels have a border for the trusses on one side. (Height: approx. 25 mm) - The other side is continuous and serves as a 22 mm high upstand Push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 03 pieces 3,000 mm – 04 pieces 3,750 mm - 05 pieces Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged sepa ...

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13.0 bar Increased test overpressure : 24.05 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner type G7/1-D, ZMD-LN, 250-1,550 kW, 15-500 mbar, gas control section, control cabinet, feed water pump and the existing coarse and fine fittings. Econmizer: Eco 3, 82 kw, 31 bar, 238°C, 28 ltr.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 2003 CE mark : 0036 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of manufacture : 1997 equipped with Weishaupt gas burner G7/1-D, ZMD, 300-1,750 kW, 15-500 mbar, gas control section, Control cabinet, feed water pump, ECO and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD 1250 Heating surface approx. : 20 m² Boiler capacity max. : 1.250 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 2000 equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, Gas control section, control cabinet, feed water pump and the existing coarse and fine fittings.

1 gebr. Boiler --------------------------- Make : LOOS; Gunzenhausen Type : U-HD Heating surface approx. : 31 m² Power max. : 2.000 kg/h most permissible. Operating overpressure : 10 bar Increased test pressure : 18 bar Water content at NW approx. : 1.740 l Water content full approx. : 2.480 l Year of construction : 1999 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, water level sight glass, steam and safety valve and the existing coarse and fine fittings

Manufacturer: Krones Model: Linatronic K735 Year of Manufacture: 2011 Type of Machine: Bottle Inspector Voltage: 400V / 230V Power Supply: AC 3/N/PE Frequency: 50 Hz Max Full Load Current (Ib max): 13 A Short-Circuit Rating (Icw/Icu): 0.64 kA Find more here - / Contact us at -

ID3517 Liebherr PR731 C-L year/Year of construction 1990 15.8 t Bulldozer with blade and rear ripper, undercarriage good Bulldozer with blade and rear ripper, drive good

Slicing device for biscuits Cutting - Leo with inlet shaft Tabletop device made of stainless steel Output up to approx. 2000 rolls Adjustable cutting height for cut-through pastries Baked goods max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, ready to plug in Dimensions (WxDxH) in mm: 800 x 440 x 470 New device 12 Months Warranty + Spare Parts Service optional: Driving table for LEO Service Package E-Box Maintenance contract Instruction & Commissioning We have many TOP bakery machines in stock for you!

Profilcut Tool Set Leitz Front Door as good as new Item No.: SE 220 1 50 4800-10600 Y30 ET 952141/711001 MAN

Strike Hex NEW Model No.: SH 1.2 Air-powered spreader Easy and simple operation for chilled, untreated butter on the pastries Tabletop device made of stainless steel including: 1 nozzle of your choice from 20 - 30 mm width Optional: - Butter container with attachments - Thread adapter - Piping nozzles 20/25/30/35/40/50 mm More TOP devices in stock!

Strike Hex NEW Model No.: SH 1.6 Air-powered spreader Easy and simple operation for chilled, untreated butter on the pastries Tabletop device made of stainless steel including: 1 nozzle of your choice from 20 - 30 mm width Optional: - Butter container with attachments - Thread adapter - Piping nozzles 20/25/30/35/40/50 mm You will find your machine with us!

Manufacturer: Lenze EPM H-310, Model: EPM H-310 , Serial number: 0041188, Serial number: 00-299-00371 REV 2, Serial number: 0041188,

Manufacturer: Homag Flachzieklinge, Type: Nachputzeinrichtung Leimfuge, Ausführung links: yes, Ausführung rechts: yes, Flachziehklinge: yes, Tracing by roller: yes, FREE TEXT: Beseitigung von Klebstoffresten im Bereich der<CRLF>Leimfuge. Abtastung von oben und unten.<CRLF>Werkstückdicke 7 - 60 mm,

Manufacturer: Heesemann Spindelhubgetriebe 2 Stück, Type: aus Heesemann LSM 8, Motor with gear: 2 Stück Verstellung Schleifaggregate, Motor with gear: 2 Stück Verstellung Schleifaggregate,

Manufacturer: Heesemann Spindelhubgetriebe, Type: aus LSM 8, Year: 2 Stück, Year :2 Stück

Manufacturer: Heesemann Bedienteil LSM 8, Type: Steuerung Schleifmaschine,

Manufacturer: Lenze Vector 8200 3 kw, Type: 8200 Vector, Serial number: 004422991, Systemconfiguration: 45386151, Hz: 0-65, Serial number: 004422991,

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Hersteller : Lenze, Type: 33.9212, Serial number: 00357356, Card number: 33.9212 E.4H, Screen: 003573560050150000001,

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,