könig mini rex used for sale

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...

Heat exchanging type: VES 8''SX 1 FV minimum temperature: -10 St C pressure: 18 bar not used

Wolfe Rex

Painting facility Königsmoos: Make : Wolf Built: 1989 Dimensions: 3.8 m x 6.9 m x 3.0 m (approx. WxLxH) Supply air ceiling : Filter ceiling Lamps: 2 x 4 pcs. recessed luminaires with 4 x 58 W each Entrance side: 2-wing gate 2.35 m x 2.85 m (approx. WxH), glazed Escape door: 2 pieces, 0.6 m x 2.0 m (approx. WxH) Rusting : the existing rusting remains on site - we can offer alternatives Heating unit: 209 kW, oil burner Energy saving: Speed control with frequency inverter Dry temperature: 80 degrees C Supply air unit: 22,500 m3/h; 7.5 kW Exhaust air unit: 22,000 m3/h; 7.5 kW Pipelines : Supply and exhaust pipes, deflector hood, etc. Electrical: Control cabinet Location : Ingolstadt Area

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

construction height: 2.800 mm height of stroke: 3.800 mm lifting forece: 4.000 KG equipment: - cabinet - safety cover - Rexroth hydrostatic drive - lenghtwise-cross-cirrcle- and diagonal drive - all around lighting and reversing alarm - XXL broad cabinet - door for cabinet - heating for cabinet

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a  ...

Lefort / Corema lid press P400 TE for bale size 400x400 mm, press box 3 m length, opened 1.2 m wide, each wing 90 t and final compressor 100 t pressing force. Drive 30 kW Rexroth pump.

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

Stock # 5154 Valve 4WE10J32 / CG24N9Z4 Manufacturer: Mannesmann Rexroth No 00587170 Demag spare part, used

Stock # 5157 Rexroth Proportional Valve DBETR-10/80 +Valve 00376046 No. 46 LFA16 DBETR-62 + 88013466 used Demag spare part

CNC Universal circular grinding machine SHU321C Brand new, never used. Control FANUC Series Oi-TC 2-axes machine. Diameter of grinding workpiece -external 8-320 mm -internal 30-250 mm Center height 165 mm Maximum grinding length -external grinding (center grinding) 710 mm -internal grinding (in chuck) 135 mm Maximum angle of table rotation -clockwise 3 degrees -counterclockwise 11 degrees Grinding wheel -dimensions for external grinding 450x50x203 mm -peripheral speed 35 m / sec Rotation angle of the grinding wheel ± 90 degrees Front saddle -30 degrees clockwise rotation angle -90 degrees rotation angle -speed range for external grinding 30-400 rpm Back saddle -size of the fixed center Morse N4 -Pinolite stroke 35 mm Cross feeding range 0.1- 4000 mm/min Range of longitudinal feeds 0.05-8 m / min Minimum cross feed 0.0005 mm Main motor power kW 5.5

Qty. 1 Second-hand baby diaper production line Mfc.: Maqmantas Type: Pannolini – 50 IMD Built: 2015 Size of diapers: Mini, Midi, Maxi, Junior Nominal Production: 50 pieces/min. Dimensions: 4800 x 950 x 2050 (L x W x H) mm (without exhauster) Room dimensions: 21 x 5.3 x 3.1 m – L x W x H Voltage: 3 ~ 220 V, 3 ph., 60Hz, 100 A Power: 12 kW Theoretical Weight: 1500 kg Screw compressor: 7, 5 bar The machine can be demonstrated in running conditions.

GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.

The teedwater is pre-heated in the exchanger E009, by steam condensation coming trom the last column, and in the pre-heaters F004-F001 by condensate produced in every effect. The teedwater evaporates partially in the first column (E001) as heated by industriai steam. The industriai steam passes through the pre-heater F001 and is drained by steam trap ST001. The produced pure steam trom the top and the water not evaporateci trom the bottom 1 -pass to the tollowing effect, where the process is repeated at lower pressure and temperature. The distillate produced by pure steam condensation goes to the pre-heater F002. The process is repeated for all columns in the same way. The steam produced in the last effect is condensateci and cooled together with the distillate coming from pre-heaters in the exchangers E009 and E01O, by teed and cooling water. 1 - SINGLE EFFECT RUNNING DESCRlBTION ...

The belt dryer / continuous dryer is used for the continuous drying of coatings on smooth surfaces such as glass. Manufacturer TESOMA GmbH Type LYNX Version 16-E-HHH-X Built in 2008 Bandwidth 1600 mm Flow height 400 mm Inlet length 500 mm 3 hot air segments per 2000 mm Outlet length 500 mm drying temperature 100 °C solvent throughput 7.00 kg/h at minimum exhaust air volume flow 1500 m3/h Tape speed 0.5 - 5 m/min Connected power 89 kW Heating capacity 79 kW total motor power 10 kW (fan and drive) Total dimensions Width: approx. 2400 mm Length: approx. 8800 mm Height: approx. 1800 mm For a visit, please make an appointment.

Used sachet machine made by Polpak S100. New 1999. Technical parameters: dimensions: - depth: 900 mm - width: 2500 mm - height: 1900 mm - weight: 340 kg - pneumatic drive, cup volume dispenser with infinitely adjustable dose size of 20-100 ml - capacity up to 3500 packages / h - foil width 100-400 mm - pouch length up to 200 mm - 380 V + compressed air supply - power consumption (maximum / minimum) 2.2 / 1.5 kW + compressed air 8 atm. 600 L / min Documentation available.

NanoFocus μSurf confocal microscope Operation manual laitetori.fi/site/assets/files/6647/operating_manual__nanofocus_surf.p df Technical specifications laitetori.fi/site/assets/files/6647/technical_specifications.pdf NanoFocus® μSurf® confocal microscope offers the unique possibility to precisely measure optically complex surface structures with high vertical and lateral resolution. The number of optical artefacts is minimised. The measurement results and comparisons using surface roughness standards of the Physikalisch Technische Bundesanstalt” show an unique correspondence with the tactile instruments. NanoFocus® μSurf® enables fast, careful and non-contact characterisation, which is most important for sensitive surfaces. Large samples can automatically be measured by stitching basic fields.

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

good (used)

good (used)

ABB ACS601-0040-3 Frequency Converter Manufacturer: ABB Type: Frequency Inverter Drive Model: ACS601-0040-3 Phases: 3 Power rating: 37 kW Input type: Digital, Analogue Maximum switching current: 76 A Minimum operating temperature: 0 °C Maximum operating temperature: +25 °C Height: 715 mm Breite: 306 mm Width: 360 mm Weight: 35 kg The frequency converter is new and has never been in operation. Documentation available. The frequency inverter can be inspected anytime upon prior arrangement.

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Inv. Num: 5234 Type: SPRINT 20 linear Producer: DMG GILDEMEISTER Generated: 2006 Parameters: Engine hours: 79172 h Switch-on hours: 50648 h Max turning diameter: 20 mm Maximum length travel in the X-axis: 35 mm Maximum travel Z-axis: 80 mm Maximum feed speed Axis X: 40 m/min Maximum feed speed Axis Z: 40 m/min Number of spindles: 2 pieces Maximum main spindle power: 5.5 kW Minimum main spindle speed: 1 1/min Maximum spindle speed: 10000 rpm Axle X2: 230 mm Axis Z2: 180 mm Maximum length travel in the Y-axis: 240 mm Counterspindle power: 3.7 kW Maximum counter spindle speed: 1 1/min Maximum speed of the driven tools: 1000 rpm Lathe length: 2275 mm Lathe width: 1300 mm Height: 1760 mm Weight: 2.6 t Facilities: Rod loader with magazine Conveyor Liquid cooling Technical documentation Full coverage of the work area

Machine: Benhil Multipack 8304 mini portion Capacity: up to 110 packets/min Pack size: 7,5, 10, 12,5 gram Dimensions: 30 x 40 x height adjustable max 20 mm Product: Butter / Margarine Wrap material: Aluminium foil Dimensions: Approx. 200 x 150 x 200 mm (l x w x h) Weight: 1.400 kg (gross) Electricity: 1.1 kW

McIntyre Euro-strip 500 Cable Stripper The perfect bench-top cable stripper. Compact and efficient The Euro-strip 500 is one of the smallest in the range and is a low energy, large capacity unit that is easy to move around a yard. The Euro-strip Cable strippers are designed for simple, dependable operation without the need for constant adjustment, which suits all different material sizes. Taking up minimal space and emitting very low noise, the Euro-strip 500 will prove to be a valuable addition to your business.

Used shopping cart of the brand Wanzl type ELA 130 with original Wanzl wheels, child seat, foldable box storage and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Wanzl • Type: ELA130 • Basket volume: 132 litres • Condition: used/good • Dimensions (H x W x D): 102.9 x 59.5 x 102.2 cm • Weight: 25 kg • Wheels: 12.5 cm • Child seat • rear box storage • Coin deposit system • Original Wanzl Wheels • Space requirement per car: 18.7 cm • Space requirement per 10 carriages: 272 cm • Space requirement per 50 carriage: 1020 cm • Capacity parking boxes 3-row, length 5 m: 66 On request, you will receive the shopping carts with handles in your desired colo ...

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

BACHILLER PC-200 Complete Process equipment (2004). Unused Processes: Dispersion, emulsion, humidification, grinding, homogenization, dissolution, mixing, suspension and vacuum deaeration. For suspensions, emulsions and dispersions. For the preparation of any liquid or pasty product since all manufacturing operations can be carried out in a single device, from the loading of the ingredients to the deaerated and preparation prior to packaging. It combines different basic elements of agitation such as the colloid mill, disperser and mixer-scraper ideal for suspensions, emulsions and dispersions. Sectors: pharmaceutical, cosmetic, food or chemical industry. In stainless steel The PC incorporates: - Agitation, grinding and dispersion devices with independent actuation. - Colloid mill with real grinding action, thanks to the milling of its elements and the regulation of sepa ...

Used shopping cart of the brand Caddie, 211 litre basket volume, with child seat and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Caddie Benelux • Color: blue • Basket volume: 211 litres • Condition: used/good • Child seat • Coin deposit system Please take a good look at our other advertisements. In addition, you will find on our homepage a huge selection of used and new (B-goods) shopping carts in all versions and always at an absolute discount price! Whether with child seat, box storage, deposit system, baby carrier, promo box on the handle or as fun mobile for children; the right shopping cart store - you will certainly find what you are looking for with us. Need ...

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Robot Mini robots, Laboratory robots Manufacturer: Mitsubishi Type: MELFA RV-3SB-S312 Built: 2006 Control Teach panel (input display) All cables Operating instructions as PDF file Applications Assembly of individual parts Testing and testing tasks Material processing Loading and unloading operations Palletizing Application of sealants Colour painting Fine and brazing Deburring All information without guarantee

78 used shopping trolleys (155l) of the brand Siegel (now Wanzl) type SieWa Merkur Weekend 160 E2 with child seat and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Seal (today: Wanzl) • Type: SieWa Merkur Weekend 160 E2 • Color: red • Basket volume: 155 litres • Condition: used • Child seat • Coin deposit system • Crate storage • 4 steering wheels (12.5 cm) • Load capacity: 205 kg • Dimensions (H x W x D): 105 x 60 x 109 cm Please take a good look at our other advertisements. In addition, you will find on our homepage a huge selection of used and new (B-goods) shopping carts in all versions and always at an absolute discount price! Whether with child s ...

The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. STANDARD FEATURES: Labelling machine balcony construction stainless steel executed. Electrical cabinet on machine board. Behind easy access from behind to electrical and mechanical parts; large door  ...

Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...

Manufacturer: Bobst Model: IRT.II. It is a rebuilt 2-color letterpress printing machine that uses flexographic clichés "I'm not going to be Year: 1966 Serial no. 5305 Automatic feeder Cliché execution: - Thickness: 4.75 mm, details without the thickness / thickness of the cliché adhesive tape - default: 2% Solid board and corrugated board Cardboard thickness maximum: 65 mm Minimum sheet format: 100 x 300 mm Sheet format maximum: 1,050 x 1,600 mm Working speed maximum 3,200 sheets / hour Manuals (English) available Hints: Colors: We haven't bought any more colors in a while. Inks for letterpress printing are not allowed dry oxidatively. (This should use inks from offset printing, in which the dry matter is omitted, so work, such as B. the low-migration MGA inks.) The machine still works, but prints with a large offset of approx. 1 cm in all directions. So it can o ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)

COMPLETE WAREHOUSE COLD INSTALLATION OTT & PEETZ BRAND TYPE: V18-4, serial no. 01922971, manufactured 1992 and REFRIGERATING CONDENSER GÜNTNER GVH 101A / 2E (S), manufactured 1999 The outdoor installation is complete besides the electric panel has 4 Bitzer compressors, Bitzer ES 900 liquid receiver + pressure switch + condenser GÜNTNER GVH 101A / 2E (S) The four compressors are: 2 Bitzer 4P-15.2 11 kW compressors, volume each 47.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1992, 380-420V power supply, 3 ph 2 Bitzer 4N-12.2 Y compressors, volume each 56.10.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1999, power supply 380-420V, 3 ph It covers an internal cooled area of 152.38 square meters. GÜNTNER GVH 101A / 2E (S) REMOTE CONDENSER, 2 volume fans in liters 563, minimum pressure at 21 bar / 60 ° C, maximum working pressure 28 bar, maximum temperature 100 °C. At th ...

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Rex cutter 65 liter Outside of machine made of special stainless steel 65-liter bowl 2 knives speeds 2 bowl speeds – fast and slow Main cover is made of special steel, stainless steel Noise-canceling cover made of special plastic Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 135 depth: 90 height: 130 Main motor power: 18 kW Voltage: 400 V, 50 Hz Delivery time: 10 working days after advanced payment

Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may vary

pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure  ...

MAZAK CO2 Laser Cutting Machine STX510 MKIII 4kW -made in Japan- ! SOFORT EINSATZBEREIT ! over-recovered, very well-preserved MAZAK laser machine with 4000W Panel size: 3000mm x 1500mm minimum set-up area of 2.9m x 7.3m Puncture sensor Plasma sensor Burning Sensor automatic nozzle change Small parts conveyor belt Ball roller table Fast-punching fully encapsulated machine cover Cast bed, no foundation needed FE: up to 20mm VA: up to 15mm ALMG: up to 10mm Plastic, wood cutable incl. CAD / CAM Software 2020 Version incl. 12 months warranty (within Dtl.) incl. delivery incl. commissioning + training Testing under electricity ready for delivery immediately immediately ready for use =optional with fully automatic loading and unloading MAZAK CELL=

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

Key data: 16

- Table diameter: 250 mm - Adjustable height table (clamping height): 0 - 630 mm - Drill chuck: RB 18-16 L (drill diameter up to 16 mm) - Electric connection: 220 V, 50 Hz, 510 W (motor specification) - Dimensions of the stand: 0.50 x 0.30 m - Transport dimensions (HxWxD): 1.80 x 1.20 x 0.70 m (Changes and errors to technical data and prices reserved!)

Rexroth double pump for Battenfeld injection moulding machine R900737658 SYDFE1-20/100R R900737659 SYDFE1-20/071R

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec