kva sound used for sale

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...

Briggs & Stratton Emergency Generator 20 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 896 cm³ - - - - - Generator - Power: 19.5 / 17.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 39.1 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 90 x 58 x 89 cm - Weight: 160 kg - - - - - Price and payment - 3650,- € + 19 % VAT = 4343,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oil ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1200 mm Table width: 600 mm Number of T-channels: 5 Distance of the T-slots: 100 mm T-channel width: 18 mm Table load max.: 1200 kg Longitudinal travel (X-axis): 1100 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 630 mm Table load max.: 1200 kg Tool changer: Number of tools: 30 Tool diameter max.: 120 mm Tool lenght: 350 mm Max. tool-weight: 15 kg Spindle nose: ISO: 50 Distance spindle nose to table: 218 - 848 mm Spindle diameter: 100 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Feed range: 1 - 5000 mm/min Rapid traverse: long.: 20 m/min Rapid traverse: transversal: 20 m/min Rapid traverse: vertical: 15 m/min Spindle moto ...

Steam generation plant consisting of Double flame tube boiler with economiser, 2 x SAACKE burner Teminox for natural gas H, calorific value HS 11.4 kJ/Nm³, 14MW (2 x 7 MW), 17 to. Saturated steam at 20 bar ü (25 bar hp). Boiler: Manufacturer LOOS Deutschland GmbH Type ZFR 2300 Type of large-capacity water boiler with two flame tubes (three-speed) and a flue gas water preheater (Economizer) Permissible operating pressure (PS): 24-25 bar Permissible operating temperature: 224°C Permissible steam output: 23 to. Saturated steam Burner: 2 x SAACKE Type Teminox GS 75-22 Fuel: Natural gas There is a soundproofing hood for each burner Fireplace: 37 meters above ground Outlet area: 0.507 m² Stainless steel double fireplace Water treatment plant Manufacturer CHRIST consisting of softening system and downstream reverse osmosis system Complete installation from y ...

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho DMU50e DMU 50 Evolution Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 380 mm Power on spindle: 25/35 kW Type of millinghead: SK 40 Spindlespeeds: 20 > 18 000 rpm Table size: Ø 500 x 380 mm Control: Heidenhain Power needed: 38 kVa Length: 4000 mm Depth : 2500 mm Height: 2700 mm Weight: 5 ton Toolholder: yes Number of tools: 32 tools

JENBACHER YEAR: 1997 HOURS: 23000h ELECTRIC POWER: 827 kW – 400V AC 50Hz The equipment is stowed and ready to load. This engine has been stopped regularly in 2011. VOLUME OF SUPPLY: They are integral parts of generators and groups necessary for their execution (gas input, output energy): ELECTRICAL GROUP: Engines JENBACHER 316 GS / 827 kWe Year 1997 , Operating hours: 23000h, 2 units. Alternator STAMFORD / 1000 kVA -800kW- 400V AC 50HZ Generator (alternator, motor and PLC motor) Control Panel Generator (DIANE XT) Auxiliary control panels Low voltage circuit breaker petrol train Silencer Slippers Technical documentation You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

Thumm SU100 P Current UV Immersion Impregnation System with Exhaust Air Purification System Current UV impregnation is an innovative immersion process for low-voltage round wire windings. In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow. When dipping the heated winding, the impregnating agent becomes thin and can thus penetrate into the smallest cavities. With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can drain off again after immersing on the cooler sheet metal package. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the sheet metal package. By eliminating conventional furnace drying, energy and time are saved. Together with the use of a low-emission impregnating agent, the en ...

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

5 AXIS – CNC GEAR SHAVING MACHINE (+ GEAR HARDENING) make : MIKRON CIMA model : H 250 CNC COMPONENTS : outer diameter : 25-250 mm. width (gear) : max. 150 mm. length (shaft) : max. 580:600 mm. module : 0.5 – 5.5. WHEEL : outer diameter : 300 & 350 mm. width : max. 50 mm. swivel angle : (R) 25 & (L) 25. REVOLUTION : wheel speed : 10:750 rpm. component speed : max. 8000 rpm. TABLE : feed speed : 1:1000 rpm. stroke : (R) 100 & (L) 100 mm. swing angle by crowning : max. 3° CUTTING METHODS : plunge. plunge with oscillation ( table feed ). conventional. CNC : 5 axis CNC CONTROL UNIT ( FANUC SERIES 0M-C). POWER SUPPLY power circuit : 3 phase AC380V 50Hz. control circuit : AC 100V & DC 24V. total power : 20 KVA MACHINE WEIGHT : 5000 Kg. AC SERVO MOTOR model 0S (0.55 Kw) AC SERVO MOTOR model 5S (0.9 Kw) AC SERVO MOTOR model 1 0 S (1.8Kw) AC SERVO MOTOR model ...

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 0 - Material thickness steel Fe52/Fe37 max: 0 mm - Material thickness aluminium max: 0 mm - Axis speed [X axis] max: 0 m/min - Operating hours: 0 - Material thickness (punching) max: 0 mm - Material thickness max: 0 mm - Material thickness stainless steel max: 0 mm - Simultaneous positioning speed (X / Y): 0 m/min - Punching speed (Hit speed max.): 0 1/min - Number of index tool stations, max: 0 - Tool rotation, max: 0 r/min - Control type: 0 - Compressed air pressure min: 0 bar - Compressed air consumption max: 0 l/s - Turret rotation: 0 r/min - Oil tank capacity: 0 l - Power supply: 0 kVA - Axis speed [Y axis] max: 0 m/min - Working area max: 0 mm - Punching force: 0 kN - Punch diameter max: 0 mm - Max. workpiece weight: 0 kg - Power: installed max: 0 kW - D ...

turning diameter: 570 mm turning length: 1000 mm control: Sinumerik 805 Siemens clamping length: ca 1200 mm greates pass round over bed: 570 mm swing diameter over face slide: 365 mm turning speed range - main spindle: 3 - 2.500 min/-1 power capacity - main spindel: 15 / 19 kW spindle bore: 62 mm spindle head: DIN 55027 No. 8 diameter of quill: 80 mm taper of center: MK 5 quill stroke: 190 mm total power requirement: 40 kVA weight of the machine ca.: 5,6 t Lathe cycle controled - SIEMENS Sinumerik 805 / Simeodrive 611 - 4-Jaw Chuck, Handwheel, Covering - Chip Tray & coolant - adjustable feet - approx 20 tool holders 2021 Electrics/controls check by Boehringer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The blower is installed in a soundproof hood with base frame, safety valve, check valve and attachments. The drive motor can be designed according to customer specifications. The compressor stage has been overhauled. You can also purchase only the GM 80 L stage. If you have any questions, please do not hesitate to call.

DIMTER finger jointing line model HK 800 suitable for vertical and horizontal zincing ! Suitable for hardwood and softwood ! Principle Dimter: Wood stands - milling unit drives - very good service - and condition incl. soundproof cabins Fully automatic system: automatic feeding of compartment transport Processing automatic stacking and packaging Input lengths: 150 -1500mm Wood widths: 30 - 200mm Wood thicknesses: 15 - 100mm Capacity: 3 packets/min. (800mm) consisting of the following units: - Loading station 3 packages in the buffer (automatic) Package milling machine with double milling head with two chippers and two spindles 10 mm joining length special shape of the fingers (round tips) with automatic glue application (roll) and dosing (suitable for PVA glues) Universal turning and transfer station for horizontal and vertical joining (flat and upright) transverse l ...

WEINIG planer and moulder model Unimat 22 A Equipment: - Package - Lifting table (no pit required) - automatic stacking strip removal - Rubberized inclined conveyor - Rubberized separation - Longitudinal conveyor for planing.- Moulder - Unimat 22 A with soundproof cabin - 2nd operating unit - Manual acceptance Weinig Planer.- Automatic throat machine, technical data: Spindle arrangement: U - R - L - O - U Saw Working width: 220 mm Working height: 120 mm Motor power feed: 4 kW Motor power of the working spindles: 4 kW Speed of the working spindles: 6000 rpm. Diameter of the working spindles 40 mm Feed infinitely variable 6 - 32 m/min Diameter of feed rollers (hardened) 140 mm Space requirement line: 12.7 x 5.0 m Spelling mistakes and errors excepted

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV Year of construction : 2012 Condition : New Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Cqs9sygju Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

Used machine in good condition. Available for immediate delivery. - Number of turret stations (pcs): 20 - Turret rotation: 166 r/min - Operating hours: 48.000 - Axis speed [X axis] max: 150 m/min - Compressed air pressure min: 6 bar - Control type: Siemens Sinumerik 840D - Punch diameter max: 89 mm - Power supply: 80 kVA - Axis speed [Y axis] max: 150 m/min - Working area max: 1.500 x 3.000 mm - Punching force: 300 kN - Material thickness max: 8 mm - Material thickness (punching) max: 8 mm - Material thickness aluminium max: 50 mm - Material thickness steel Fe52/Fe37 max: 4 mm - Oil tank capacity: 400 l - Material thickness stainless steel max: 3 mm - Weight: 28.000 kg

M. No.: 560037 Colours: 6 Equipment / Additional information: Consists: • stacker • printing machine • Cup feeding • stapler Max. cup rim diameter 130 mm Min. cup rim diameter 55 mm production speed each according to cup size, quality and Raw materials with UV drying up to 24,000 cph (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying approx. 26 kVA Electrical connection 3 x 400 V, 50 Hz Air connection / consumption 6 bar / approx. 50 m3/h Weight approx. 7,800 kg

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Technical data Max. turning diameter: 20 mm Turning length: 320 mm Max. drilling diameter: 12 mm Max. threading diameter: 10 M (Metric) Internal spindle diameter: 24 mm Spindle speeds: stepless from: 200 rpm up to: 8000 rpm Independent carriage: Number of positions: 3 + 5 number of driven tools: 3 Back spindle:: Ø 32 mm speeds: from: 200 rpm up to: 5000 rpm Spindle positioning increment: 15 ° Turret slide: number of tools: 10 number of driven tools: 10 Rapid traverse: X axis (longitudinal): 20000 mm/min C axis (spindle,resolution): 1 ° Voltage 50 Hz 3x: 400 Volt Spindle motor: 3.7/5.5 kW Total power required: 8 kVA Machine´s weight about: 2400 kg Overall dimensions machine: Length: 2800 mm Width: 1370 mm Height: 1800 mm Various accessories:  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Slightly used, in like new condition, classifier mill Hosokawa ACM 5 Pharma. This micronizer allows you to obtain a perfectly controlled top cut. It can be used to fine grind different products. The comminution occurs in the lower part of the grinding chamber where the feed particles are crushed. Thanks to the adjustable classifier wheel on the upper part of the grinding chamber, the ...

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: CNC – A00 Technical data Number of axis total: 3 Number of tables: 1 Number of spindles: 1 Table length: 500 mm Table width: 270 mm Table load max.: 80 kg Longitudinal travel (X-axis): 350 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 350 mm Tool changer: Number of tools: 26 Tool diameter max.: 55 mm Tool lenght: 200 mm Max. tool-weight: 2 kg Spindle nose: BT: 30 Distance spindle nose to table: 200 - 550 mm Spindle speeds: stepless from: 22 rpm up to: 22000 rpm Feed range: 5 - 20000 mm/min Rapid traverse:: 50 m/min Air connect: 4 - 6 bar Voltage 50 Hz 3x: 380 Volt Total power required: 25 kVA Machine´s weight about: 2100 kg Overall dimensions machine: Length: 2341 mm Width: 1410 mm Height: 2165 mm V ...

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 800 mm Table width: 300 mm Max. distance from table to spindle centreline: 600 mm Grinding length: 800 mm Grinding width: 300 mm Grinding wheel: Diameter: 250 mm Width: 50 mm Bore: 50.8 mm max. width: 70 mm Table speeds: stepless from: 2 m/min up to: 35 m/min Creep feed: from: 2 m/min up to: 1000 m/min Automatic cross feed: stepless from: 1 mm/min up to: 10000 mm/min Automatic vertical feed: from: 0.001 mm/min up to: 10000 mm/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 6.6 kW Total power required: 22 kVA Machine´s weight about: 4500 kg Various accessories: Coolant system Paper filter facility Oil mist extractor Stabilisation coolant temperature Electrical magnetic chuck Length: 800 mm Width: 300 mm Wheel trueing attachment: TAG Profile  ...

HARTFORD LG1000 LG1000 F1 series TABLE Working area mm 1150x510 Table with T-slots mm 18x3x160 Table capacity kg 700 SHIFTS AXIS X mm 1000 Y AXIS mm 510 AXIS Z mm 630 Spindle axis distance to table surface mm 100 ~ 730 Distance of the table axis tip from the column mm 562.5 POSITIONING ACCURACY Positioning accuracy (JIS B6338) mm ± 0.008 Repeatability (JIS B6338) mm ± 0.002 FEEDS Working feed m / min 12 Rapid traverse X / Y / Z m / min 30/30/24 (optional 40/40/32) SPINDLE # 40BT Spindle Nose Spindle speed (belt gear) rpm 8000 (opt. 10000/12000) Spindle speed (DDS) rpm 10000 (opt. 12000/15000) Spindle drive (30 min) 11 kW, belt drive AUTOMATIC TOOL CHANGER Tool magazine capacity A: 24 (opt S: 20) Max. tool weight kg 7 Max. tool dimensions (diameter x length) mm ø75 x 300L (option S: ø90 x 250L) Type of hand ...

A 3552 KW Solar Centaur 50 gas turbine for sale. Brand: CAT Solar Centaur 50 Type: EH5701-59-G Electr. Power: 3652 KW Generator: ABB Stromberg Drives Type: HSG 710K4 Electr. Line: 5000 KVA Voltage: 10500 V Year of construction: 1991 Weight: 21.000 Kg FCA freely charged in Koblenz

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC O-M Operating hours: 55887 Technical data 2 columns execution Table length: 1320 mm Table width: 860 mm Longitudinal travel (X-axis): 1200 mm Transversal travel (y axis): 600 mm Travel of the vertical slide: 635 mm Passage from grinding motor to table: 750 mm Max. grinding diameter: 230 mm with display-plate: 360 mm Passage between the columns: 950 mm Max. angle with taper grinding: up to: 16 ° Planetary motion speeds: c axis stepless from: 5 rpm up to: 300 rpm Possible grinding-spindle speeds: stepless from: 9000 rpm up to: 80000 rpm With air-turbine max.: 160000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 8.5 kVA Machine´s weight about: 6300 kg Overall dimensions machine: Length: 3000 mm Width: 2500 mm Height: 2870 mm Various accessories: CN ...

Machine Details Stock number 1105-03735 Machine type CNC lathe Brand MAZAK Type QT 20 N Year of construction 1995 Control type CNC Control Mazatrol T PLUS Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from site Technical details Turning diameter 440 mm Turning length 451 mm Control Mazatrol T PLUS Turning diameter via bed carriage 300 Tailstock holder MK 4 Quill stroke 130 mm Tailstock displacement 500 mm x-axis 180 mm z-axis 510 mm Spindle bore 62 mm Speed range 12-4500 rpm Total power requirement 40 KVA Machine weight ca. 4,2 t Information WITH MAZATROL T PLUS Good Macschine All prices plus VAT. VAT.. Changes and errors in the technical details and information reserved.

Scania emergency generator set 365 / 400 kVA NEW - Year of construction 2023 - - - - - Engine: - Scania (Sweden) - Model: DCI13 - 6 cylinders -Diesel -Water-cooled - 1500 rpm - Power: 435 hp - - - - - Generator: - Leroy & Somer (France) - 365 / 402 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / switching unit: - Digital starter unit with display - with automatic start function - Generator monitoring: volts, amps, hertz, hydrocarbons - Motor monitoring - - - - - Other data: - Dimensions: 456 x 196 cm - Weight: 4550 kg - Tank volume: 990 liters - Sound level: approx. 67 dB +/- (7m) - Fuel consumption: 36.5 l/h (50%) / 52.6 l/h (75%) - - - - - Scope of delivery: - Scania generator set 365 / 400 kVA - in soundproofed housing - with start-up unit / controller -Tank -Battery - Exhaust / silencer - - - - - Price a ...

ARO Reversible Ergoline kVA 55 Resistance Welding System Manual welding station For manual welding applications where safety, ergonomics and reliability come first, ARO models are the right choice for you. Advantages of manual welding - high performance - Cost efficiency - highest reliability. - recognized by the automotive industry The data sheet can be found under this link Scope of delivery: Resistance welding gun ARO/IQR, PSZ25, YOC 2014, manual; incl. IQR Harvys turning control unit

Lister generator set 15 kVA with starter unit - - - - - Engine: - Lister (English manufacturer of industrial engines) - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford (England) - 15 kVA - 230 / 400 volts - 50 Hertz - AVR - - - - - Control box / starter unit: - Ignition lock for starting - Volt display - Hertz display - Ampere display - Battery voltage indicator - Operating hours counter: 5600 hours - - - - - Condition: -Used - The device was used for emergency protection and for occasional use - A test run with load reduction was made - The engine runs well - The generator generates 400 volts and 50 hertz - - - - - Scope of delivery: - Lister generator set 15 kVA - with starter unit - - - - - Transport: - A Germany-wide transport incl. unloading is possible for an extra charge - To ...

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

2x Deutz MWM gas generator set 150 kVA --> 2 identical devices available (price per piece) - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: -Used - The devices come from a waterworks and were installed there for emergency power protection / for occasional use - The motors were cooled by an external cooling circuit - - - - - Transport: - A Germany-wide transport is possible for an extra charge - In order to be able to quote an exact freight price, please send us an inquiry with your postal code - - - - - Price and payment: - Price: 6500,- € + 19 % VAT = 7735,- € (per piece) - Payment: Prepayment - An invoice with VAT is issued - - - - - Ot ...

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 4 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 16.200,- € gross price: €19,278 - - - - - Deutz emergency generator set 80 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2012C - 4 cylinders -Diesel - 1500 rpm - Displacement: 4038 cc - - - - - Generator: - Manufacturer: MeccAlte (Italy) - 75 / 81 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance tim ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-TB Technical data Number of axis total: 3 Number of spindles: 1 Number of revolvers: 1 Swing in gap: 330 mm Swing diameter over bed: 510 mm Max. turning diameter: 350 mm Maximum turning length: 400 mm Turret carriage: Longitudinal travel (Z-axis): 440 mm Transversal strocke (X axis): 242 mm Rapid traverse Z: 25 m/min Rapid traverse X: 20 m/min Turret slide: Number of positions: 12 Tool shank cross section: 25 mm Main spindle: Inner taper type: A2-6 Collet bore: 62 mm Spindle speeds: stepless from: 50 rpm up to: 5000 rpm Tailstock: Morse taper: 4 MT Spindle stroke: 80 mm Spindle diameter: 75 mm Spindle motor: 11/15 kW Voltage 50 Hz 3x: 400 Volt Total power required: 35 kVA Machine´s weight about: 3940 kg Overall dim ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Operating hours: 12000 Technical data Working table: Length: 680 mm Width: 450 mm Max. dimensions of work piece: Length: 1000 mm Width: 550 mm Height: 220 mm Table load max.: 750 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 220 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Max. cutting speed with wire 0.33 mm: 400 mm2/min Total power required: 10 kVA Dielectric aggregate: Contents: 760 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 12 kVA Weight total installation approx.: 2100 kg Overall dimensions machine: Length: 2050 mm Width: 2020 mm Height: 2000 mm Various accessories: Cooling unit for fluttines

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 7 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: €17.500 gross price: €20,825 - - - - - Deutz emergency generator 100 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M1013EC - 4 cylinders -Diesel - 1500 rpm - Displacement: 4764 cc - - - - - Generator: - Manufacturer: Stamford (England) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance time ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 10 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 14.000,- € gross price: €16,660 - - - - - Deutz emergency generator set 60 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2011C - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer  ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: FANUC Series 0i-TD Operating hours: 12835 Technical data Centre height: 175 mm Distance between centres: 1000 mm Travels: Z axis: 1150 mm X axis: 370 mm Workpiece weight on centres max.: 150 kg Grinding wheel: Diameter: 500 mm Width: 63 mm Bore: 203 mm Peripheral speed: 50 m/s Rotatable grinding spindle head (b-axis): 0 / 30 ° Work piece spindle head: speeds: stepless from: 1 rpm up to: 1000 rpm C axis taper in spindle: ISO: 50 Required power: 4 kW Tailstock: con regolazione micrometrica Hydraulic return Taper in tailstock:: 4 MT Tailstock travel of barrel: 60 mm Feeds: Air connect: 5 - 7 bar Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 7.5 kW Total power required: 20 kVA Machine´s weight about: 10500 kg Overall dimensions machine: Length: 3900 mm Width: 2584 mm Height: 2 ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 5 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 11.500,- € gross price: €13,685 - - - - - Deutz emergency generator set 30 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: F4M2011 - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 30 / 33 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer - ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 21070 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23009 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 8 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - Net price: 12.500,- € gross price: €14,875 - - - - - Deutz emergency generator set 40 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: BF4M2011 - 4 cylinders -Diesel - 1500 rpm - Displacement: 3108 cc - - - - - Generator: - Manufacturer: Stamford (England) - 40 / 44 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer  ...

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first 5 devices is March 2023 (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 9.900,- € gross price: €11,781 - - - - - Deutz emergency generator 22 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Deutz (Germany) - Model: F3M2011 - 3 cylinders -Diesel - 1500 rpm - Displacement: 2330 cc - - - - - Generator: - Manufacturer: Stamford (England) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance timer  ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23805 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 760 mm Table width: 300 mm Number of T-channels: 3 T-channel width: 17 mm Distance of the T-slots: 100 mm Table load max.: 420 kg Longitudinal travel (X-axis): 750 mm Transversal travel (y axis): 400 mm Cutting speed: 35 m/s Diameter of grinding wheel: 355 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds fix: 1500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 7.5 kVA Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2800 mm Width: 1900 mm Height: 1760 mm Various accessories: Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300 mm Digital readout number of axis:: 2 Lamp

mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.

+ + + Availability / Delivery time / Pre-order + + + --> Planned completion date for the first devices is March / April 2023 (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can already be placed - - - - - price outside EU: 9.900,- € gross price: €11,781 - - - - - Kubota emergency generator set 17 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Kubota (Japan) - Model: D1703 - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 15 / 17 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital ComAp starter unit - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Motor monitoring - Operating hours counter - Maintenance  ...