kva sound used for sale

current capacity: 76 kVA throat: 0 mm contact pressure capacity: kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spot Welder mobile, 76 kVA-50%,117 kW Connecting Load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 580 l/min. Filling capacity: 470 l/min On / switch-off: 13/15 bar Heads / stages: 2/2 container volume: 90 l voltage: 400 V / 50 Hz engine output: 4 kW turning speeds: 915 U/min Sound power level: 95 dB dimensions: 1110 x 495 x 1000 mm weight: 111 kg - easy to move thanks to castors and long handle - mobile, V-belt driven piston compressor - Compressor for work up to 15 bar - equipped with filter pressure reducer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suction: 250 l/min. Filling capacity: 150 l/min On / switch-off: 10 bar container volume: 50 l turning speeds: 2.850 U/min Sound power level: 95 dB total power requirement: 1,8 kW dimensions: 910x470x780 mm weight: 38 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC tool milling machine make DECKEL type FP4 - 60Machine -No: 31902, built in 1992Working area X: 600 mmWorking area Y: 500 mmWorking area Z: 450 mmTool holder: SK 40 / DIN 69871-ASpindle speeds: 31.5 - 5000 rpm.Swivel range / vertical milling head: + - 45 °Spindle drive: 10 kWFeed all directions: 2 - 6000 mm / min.Rapid traverse: 6000 mm / min.Drive power: 7.5 / 10 kWConnected load: 19.5 kVAWeight: 4.3 tExternal dimensions: 3100 x 2400 x 2200 mmWith- Control Dialog 11- full protection cabin- rigid angle tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC milling machine make DECKEL type FP 4 CCtMachine -No: 203 built in 1988X-axis: 600 mmY-axis: 500 mmZ-axis: 500 mmstepless speed range: 18 - 6300 rpm.Feed range stepless: 2 - 10000 mm / min.Rapid traverse: 10000 mm / min.Tool holder: SK 40Input resolution: 0.001 mmMain drive: 8.0 kWTotal installed capacity: 23 kVANumber of tools in the changer: 26Max. Tool weight: 10 kgMax. Tool length: 300 mmMax. Tool diameter: 100/160 mmWeight approx: 5050 kgOutside dimensions approx: 2400 x 2500 x 2500 mmWith- CNC Control Dialog 11- Tool changer- rigid angle table- Angle stop- Separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machin ...

Suction: 660 l/min. Effective suction: 520 l/min On / switch-off: 8/10 bar container volume: 270 l voltage: 400 V / 50Hz power capacity: 4 kW turning speeds: 1025 U/min Sound power level: 69 dB dimensions: 960 x 740 x 1905 mm weight: 245 kg - Soundproof stationary piston compressor for work up to 10 bar - Smooth V-belt-driven 2-cylinder unit with two-stage compression - equipped as standard with all fittings and with rubber swinging elements - High performance refrigerated dryer with Super-Dry Technology and ECO shutdown - easily accessible condensate drain under the container The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 350 mm y-travel: 250 mm z-travel: 256 mm max. size of workpiece: 750 x 550 x 250 mm U-axis: +/- 70 mm V-axis: +/- 70 mm rapid traverse X/Y/Z axis: 1,5 / 1,5 / 0,6 m/min rapid traverse U/V-axis: 0,6 m/min max. concentricity: 30° / 100 mm control: AGIEVISION wire dia.: 0,1 - 0,33 mm speed of wire: 60 - 300 mm/sec wire retraction: halbautomatisch total power requirement: 9,1 kVA weight of the machine ca.: 3,6 t dimensions: 2,21 x 2,21 x 2,22 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC EDM machine make INGERSOLL type IC 112Fabr. -No: 571085 Year 1985Table surface: 700 x 440 mmLoad capacity: 1000 kgTravel X: 450 mmTravel Y: 350 mmTravel distance Z: 350 mmWorking head: 205 x 205 mmHead load: 600 kgErosion load limit: 400 kgPinole diameter: 120 mmclear width head - table: 300 - 650 mmDrive: servo-hydraulic.Work container size: 960 x 650 x 400 mmCapacity: 230 lFeed rate in 3 axes: 600 mm / minHydraulic capacity: 40 lOperating current: 35 ASupply voltage: 380 V, 50 HzConnected load: 5 kVADimensions L x W x H: 2885 x 2000 x 1950 mmWeight approx. 2200 kgVolume of flushing pump: 25 l / minDelivery volume of filling pump: 130 l / minTotal amount of dielectric: 400 lFilter area: 4 m / 2With- Control type M 60 D Rotron 3 T Heidenhain ME 102used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.T ...

CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions of the generator: 1950 x 2260 x 2900 mmWith- Generator M 60 DC 5 kVA- electrical meter f.d. Eroding the quill- Dialog DC-CNC planetary control PLT TVxa0xa0xa0(Dialog Color Graphic)- sep. Supply unit  ...

x-travel: 700 mm y-travel: 715 mm z-travel: 850 mm Control: FANUC 16i-MB table-size: 500 x 500 mm table weight: 500 Kg a-axis: +45 / -135 ° c-axis: 360 ° distance table / middle of spindle: - mm number of spindle speeds: 10000 U/min/rpm tool taper: ISO 40 spindle drive: 18,5 / 22 kW rapid travel x/y/z: 70 m/min Tools changer: - pos. dimension of workpiece: dia 725 mm total power requirement: - kVA weight of the machine ca.: 21 t dimensions of the machine ca.: m The machines of the Clock series can also be used as 5-axis multitasking machines. The Clock series is characterized by high speed and precision. paired with a very stable machine concept. Thanks to the fast tool change and pallet exchange, the machines achieve a very high productivity. As 5-axis version the Clock 700 is equipped with a very stable Swivel table equipped. The swivel table is double on the axes and thus guarantees ...

turning diameter: 720 mm turning length: 2000 mm control: Siemens Sinumerik 805 turning diameter over slide: 430 mm bed width: 480 mm engine output: 27/22 kW spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds: 1 - 1800 U/min Power: 28 KW current capacity: 42 kVA workpiece weight max.: 3800 kg weight of the machine ca.: 5,2 t dimensions of the machine ca.: 4,0 x 2,0 x 1,9 m 2018 Check of the Main Gear Box and change of parts like Bearing, Gears etc CNC control Siemens Sinumerik 805 - 1 Steady 400mm - 1 chuck 400mm - Coolant Tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: 250 mm grinding length: 500 mm thread pitch: - mm tread diameter: 2 mm clamping length - spindle head right: 900 mm spindle bore: 66 mm clamping length - spindle head left: 1020 mm workpiece weight: 200 kg pitch: 0,8 - 288 mm pitch angle: +/- 40 ° workpiece turning speeds: 0,4 - 50 U/min grinding wheel width: 8/13/16/20/30 mm table feed: 1500 mm/min grinding spindle speed: 1900-2450 U/min no. of feed: 12 max. thread profile: 12,5 Modul number of starts: 1 - 8 dia. of hole: 160 mm grinding wheel diam. min/max.: 275 / 350 mm grinding motor: 16 kW electrics - voltage/frequency: 3 x 380 / 50 V/Hz total power requirement: ca. 20 / 45 kW / KVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,7 x 4,7 x 2,6 m profiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with: - CNC control Grossenbacher AG / Reishauer modell FMS 6 - CNC profiling de ...

CNC spark erosion machine make AGIE type AGIETRON 100Device list 357914.1, series 015, device 005Technical specifications:Table size: 580 x 450 mmwith 3 T-slots 10 mmX axis: 350 mmY axis: 250 mmWeight of the erosion machine: 2275 kgWith- Agiematic T control, device list 813834.9, series 008, device 008, 290 kg 1.25 kVA- FSK, device list 813864.6, series 008, device 009, 65 kg- ATK 35, device list 144170.8, series 016, device 009, 220 kg- Generator Agiepuls 60M, device list 814104.6, series 008, device 008, 305 kg 3.4 kVA- Dielectric unit DA 100, device list 369964.2, series 020, device 009, 460 kg, 4.2 kVA + PD + GEN- tool changer- Cooling unit make HIROSS ICE 005, 230/1/50 serial no. 3293540001, 110 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We  ...

x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm Control: HEIDENHAIN TNC 415 table-size: 900 x 460 mm turning speeds: 20 - 4500 U/min spindle motor: 8,6 kW tool taper: SK 40 quill stroke: 75 mm Rapid Travel X / Y / Z-Achse: 7 / 7 / 6 m/min total power requirement: 12 kVA weight of the machine ca.: 3 t dimensions of the machine ca.: 2,8 x 2,2 x 2,1 m equipped with: - CNC Control HEIDENHAIN TNC 415 - rigid angle table - electr. Handwheel - Coolant - Vice Allmatic Type 160 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter max.: 220 mm table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 grad grinding spindle slide - vertical movement: 110 mm stroke speeds: 0 - 6 m/min. grinding spindle speed: bis 50.000 U/min. peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m Frequence converter make LANDERT, type SGU 160 - range : 150 - 1330 Hz, feed motion in the table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Induction soldering machine FDF Fritz DusseldorfBuilt in 1990 consisting of:1.) Soldering table type LT No. 25-18080.90 built in 1990with 1 lifting station projection: 400 mmDistance table - soldering unit: 650 mmelec. Connection: 380 V, 63 AConnected load: 35 kVADimensions: 1600 x 1200 x 1900 mm2.) Stationary parallel resonant circuit inverter type PSU 30-10Fabr. -No: 65.18601-90Max. Power: 30 kWFrequency range: 8 - 10 kHZConnected load: 41 kVAelectrical connection: 380 VDimensions: 1100 x 1100 x 2200 mm3.) Refrigeration unit VICARB Germany, built in 1987Machine -No: D 1044Operating pressure: 10 barPower: 56 kWWeight approx .: 186 kgDimensions: 1200 x 1200 x 1030 mmTotal operating time so far: 7770 operating hoursequipped with:- adjustable heating time- adjustable heating cycles- adjustable pause timelittle used, in good conditionPrice on request.Delivery: ex warehouse or location free  ...

spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1,5 total power requirement: 62 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7x4,4x2,45 m max. wheel diameter mm gear width mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 [...] Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 [...] - wo ...

max. wheel diameter: 4400 mm gear width: 645 mm max. module: 35 Control: Siemens main drive motor: 37 kW table diameter: 2500 mm max.helical angle: +/- 30 ° workpiece weight: 40000 kg total power requirement: 142 kVA weight of the machine ca.: 75 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Butt welding machine make IDEAL type AS 8Masch. -No: 127353 built in 1969Welding range in mild steel up to: 800 mm2Welding power: 40/80 kVAWelding range in aluminum: 160 mm2Max. Punching force: 25 kNRated power of the transformer: 40 kVAConnected load of the transformer: 60 kVASupply cable: 25 mm2Fuse: 125Apermissible welding frequency St. at 25/70% of the welding area: 320/120 p.h.Cooling water requirement: 150 l / hWeight approx. 1500 kgDimensions: 2000 x 1000 x 1300 mmused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Burn-butt welding machine make MÜLLER type OM-HASTU I 15/30Machine -No: 1630, built in 1982Transformer power, lasting: 15 kVATransformer power, intermittent: 30 kVAConnected load: 30 kVAOperating voltage / frequency: 380 V / 50 HzMains fuse: 80 Atr.Welding current control: 6 stagesMax. Compression pressure: 1200 daNCooling water consumption: approx. 2 l / minOperating voltage: 380 V, 50 HzExternal dimensions H x L x W: 880 x 1000 x 460 mmWeight without clamping device approx: 390 kgWith- miter clamping device and electrode jaws- separate hydraulic unit:used, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cooling capacity: 3000 kcal/h coolant: dest. Wasser tank: 7,7 l volume capacity: 3 l/min operating pressure: 3,25 bar connected load: 0,5 kVA connected load frequency: 380 V • water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Butt welding machine make IDEAL type AS 8Masch. -No: 1711.92 1977Welding area in unalloyed steel: 40 - 800 mm2Welding range in aluminum: 160 mm2Max. Punching force: 25 kNRated power of the transformer: 40 kVAConnected load of the transformer: 60 kVASupply cable: 25 mm2Protection: 80 Apermissible welding frequency St. at 25/70% of the welding area: 320/120 p.h.Cooling water requirement: 150 l / hWeight approx: 1500 kgDimensions: 1800 x 1500 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

rated capacity: 7,9 kVA rated current: 32/16 Ampere electrics - voltage/frequency: 230+400 / 50 V/Hz tank capacity: 12 l engine output: 13 PS total power requirement: 7,9 kW weight of the machine ca.: 0,152 t dimensions of the machine ca.: 0,95 x 0,55 x 0,8 m Diesel generator with: - equipped with electric start. - Equipped with automatic voltage regulator. - Air cooled - Mobile. - Direct injection - Low oil level alarm with auto-stop function. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A 26.250 KVA ABB Generator GBA 1120 LD for sale. 135.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. 26,250 MVA ABB Generator GBA 1120 LD for sale. Brand: ABB Motors Type: GBA 1120 LD Number: 8266217 Voltage: 11,000 volts Power: 26,250 KVA Year of construction: 2000 RPM: 1500 rpm Weight: 43,400 kg

Spot welding machine make DALEX type PMS 11/50 SMachine -No: 9641217 Year of construction 1964Rated power at 50% ED: 50 kVAConnected load: 80 kVAsec. Short circuit power: 23 KAElectrode holding force: 170-510 Kp.Operating current: 9.3 KAProjection: 360 mmDimensions: 1100 x 400 x 1500 mmWeight approx .: 418 kgWith- Electrode arm below- Bump welding table 100 x 100 above- water cooled versionWITHOUT control!used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 100 t distance between columns: 1000 mm stroke: 150 mm distance table/ram: 500 mm table surface area: 1000 x 700 mm die cushion stroke: 180 mm ram surface: 1000 x 700 mm ram drills x depth: 50 mm no. of strokes: 85 Hub/min tool shank hole (depth x diameter): 85 x 50 mm clamping slots: 22 DIN 650 form: diagonal number of clamping slots: 2 sheet width: 400 mm plate length: 1000 mm dimensions of the machine ca.: 3,0 x 3,0 x 3,0 m weight of the machine ca.: 8 t total power requirement: 30,2 kW - fine adjustment of stroke - cutting impact damping - oil extraction - 2 cylinders - roller feed, make Dreher, type WAV, control PMS3000 - soundproof cabin - machine was overhauled in 2001 and with new control SIEMENS SIMA-TIC OP17 equipped The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm gear width: 150 mm max. module: 6 min. module: 1.5 max. workpiece diameter: 275 mm tooth width: max. 5.5 mm spiral angle: 0 - 60 ° number of teeth: 5 - 120 transmission ratio min.: 1:1 transmission ratio max.: 1:10 milling drive motor: 20 kW workpiece drive: 14.5 kW total power requirement: 62 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,7 x 4,387 x 2,45 m Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel ...

Foot-operated spot welding machine make DALEX type SF 25/71Mash. -No: 7798556-4Rated power: 25 kVAConnected load: 80.5 kVARated primary voltage: 380VOperating current at 50% ED: 4.4 kASecondary short-circuit current: 22.4 kAOpen circuit voltage: 1.8 - 5.2 V in 8 stepsProjection: 715 mmElectrode force: 17 - 278 daNfor sheets up to: 3 + 3 mmWelding time limit for current time: 3 - 100Space required: 450 x 1150 x 1250 mmWith- Actuation via foot lever- Welding current control in 8 stagesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm Control: Siemens SlimLine Main spindle:: Max. rpm: 12.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 82 / 54 Nm tool taper: SK 40 distance spindle nose and table: 120 - 630 mm work table:: table surface area: 900 x 560 mm max. table load: 600 kg T-slots: 5 work height max.: 850 mm tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 300 mm max. tool weight: 8,0 kg feeds:: rapid traverse: 30 m/min feed power: 5 kN feed speeds: max. 30.000 mm/min total power requirement: 32 kVA weight of the machine ca.: 5,0 t dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m Documents: Coolantsystem: elektr. hand wheel: Chip conveyor: CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V The data for this ad was created with ModulM ...

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spot welding machine make ARO type PSM 150Machine -No: 1021 Year 1986Rated power at 50% ED 15 kVAArm distance 190 mmProjection 150 mmElectrode holding force 95 - 318 daNOpen circuit voltage 6 steps 2.1 - 4.22 VShort-circuit current max. 29.5 kAMaximum welding power 100 kVAPrimary voltage 380 V / 50 HzWith- MIG-O-MAT- Control Aro T1000C, -No: 2062335 Code ZT488662- extended special electrodes 250 mm projection- Separate control cabinet with 6 power levels- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

x-travel: 2100 mm y-travel: 520 mm z-travel: 500 mm Control: Heidenhain type: TNC 426 table surface area: 2800x520 mm workpiece weight: 1500 kg dist. milling spindle - table surface: 200-700 mm spindle turning speed range: 12-15000 U/min spindle diameter: 90 mm spindle taper ISO: 40 Tool changer: 30 Pos spindle drive: 22 kW total power requirement: 50 KVA weight of the machine ca.: 11 t dimensions of the machine ca.: 5.500 x 2400 x 3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatically operated table top welding machine make DALEX type F 82-1Year 1972Rated power 50% ED: 10 kVAContinuous power: 7.0 kVAMaximum short circuit power: 42.2 kVAMaximum welding power: 33.7 kVAConnected load: 25.3 kVANumber of control levels: 10Working stroke stepless: 40 mmElectrode force: 5 - 90 kPArm distance min./max.: 118 mmPerformance sheet steel: 2.5 + 2.5 mmPerformance brass: 1.5 + 1.5 mmPower aluminum: 1,2 + 1,2 mmPerformance round bar: 8.0 + 8.0 mmWeight approx.: 110 kgOutside dimensions approx.: 1010 x 690 x 1120 mmWith- Asynchronous four-time control unit ZG 1-2used, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

output: 30 Kva weight of the machine ca.: 0,15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 430 Operating hours: 5751 Technical data Number of axis total: 3 Table length: 1000 mm Table width: 560 mm Longitudinal travel (X-axis): 800 mm Transversal travel (y axis): 600 mm Vertical travel (z axis): 500 mm W axis Dimension of the workpice: Length: 560 mm Width: 560 mm Height: 500 mm Diameter: 1000 mm Table load max.: 1000 kg Tool changer: Number of tools: 30 Tool lenght: 300 mm Max. tool-weight: 8 kg Average chip-to-chip time: 5.5 sec Spindle nose SK: 40 Distance spindle nose to table: 100 - 500 mm Spindle speeds: up to: 15000 rpm Feed range: 1 - 30000 mm/min Rapid traverse:: 35 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 15 kW Total power required: 31 kVA Time under power: ...

DC and AC systems for TIG welding and electrode weldingDALEX type TGKW 85 SMachine -No: 365509 Year 1980Welding power: 6 - 360 A.Continuous operation 100% ED: 360 AOpen circuit voltage: 42 VElectrode welding power: 1.0 - 8.0 mmContinuous power: 23 kVAContinuous current: 60 APower factor: 0.72Connected load: 4 x 16 mm2 CUMains fuse: 63AWeight approx: 445 kgDimensions: 1000 x 720 x 1500 mmWith- No-load voltage reduction 42 V- Control TIG 3.1- Stairs Welding current election- water cooling- TIG torch with hose packagelittle used, from an operational resolutionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: by bank transfer net or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are available for your queries every day.Best regardsM. WaldeckWAHO Machine Tools

Manufacturer KEKEISEN Type UBF-D 7000 / 23 Year of construction 2013 Control iTNC 530 Heidenhain - 2 pallets, can be used individually or coupled. - Universal milling head automatically swivelling A: +/-90° / B: +/-90° - 6 axes - incl. NC rotary table 1,250 x 1,250 mm (fibro) - Operating hours: approx. 17,800 h - Current on / approx. 5,700 h program run x-travel 7,000 mm y-travel 1,200 mm z-travel 2,300 mm Speed range - main spindle 20 - 6,000 min/-1 Drive power - main spindle 30 kW Gear stages 2 Transmission stage 1 20 - 1.250 min/-1 Gearbox stage 2 1,250 - 6,000 min/-1 Tool holder SK 50 Swivel A+B: +/-90° Division 1 ° Workbench: Table clamping surface 7,000 x 840 mm Pallet 1: 2,500 x 840 mm Pallet 2: 3,300 x 840 mm table load 7,000 kg Number of T-slots 9 Tool magazine: Number of tool positions 60 ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: Mazatrol PC Fusion CNC 640M Operating hours: 47185 Technical data Number of axis simultaneous: 3 Number of tables: 1 Number of spindles: 1 Table length: 2000 mm Table width: 760 mm Number of T-channels: 5 Distance of the T-slots: 125 mm T-channel width: 18H8 mm Table load max.: 1400 kg Longitudinal travel (X-axis): 1740 mm Transversal travel (y axis): 760 mm Vertical travel (z axis): 660 mm Tool magazine number of tools: 30 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 110 mm Tool lenght: 350 mm Max. tool-weight: 8 kg Average chip-to-chip time: 4.7 sec Spindle nose: BT: 40 Distance spindle nose to table: 180 - 840 mm Spindle speeds: stepless from: 40 rpm up to: 12000 rpm Torque max.: 98 Nm Feed range: 1 - 80 ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: MAZATROL M32 Technical data Number of axis total: 3 Table length: 1740 mm Table width: 750 mm Table load max.: 2500 kg Longitudinal travel (X-axis): 1500 mm Transversal travel (y axis): 800 mm Vertical travel (z axis): 508 mm Tool magazine number of tools: 30 Tool diameter max.: 125 mm Diameter with free adjacent pockets: 190 mm Tool lenght: 300 mm Max. tool-weight: 15 kg Spindle nose: ISO: 50 Distance spindle nose to table: 200 - 708 mm Spindle speeds: stepless from: 22 rpm up to: 3150 rpm Rapid traverse: long.: 24 m/min Rapid traverse: transversal: 24 m/min Rapid traverse: vertical: 18 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 26 / 22 kW Total power required: 52.3 kVA Machine´s weight about: 11000 kg Overall di ...