kva container used for sale

Dangerous goods rack / container with drip tray. Dimensions: L x D x H = 6,250 x 2,600 x 3,150 mm. For storing hazardous liquids. Made by P & D Systemtechnik.

CO00855 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

Vessel rotating device, vessel rotating device, welding rotating device, welding rotating device, welding device, welding rotating table, welding rotating device -Container rotating device: Welding rotating device on rail chassis -Drive motor: 7.5 kW -Load capacity: 60,000 kg -Roller spacing: 990 - 2120 mm, wheels Ø 560 x 580 mm -Rolling speed: 0.10 to 3.35 m/min right/left running -Program control device: with hand control and foot pedal -Rail width: internal dimension 1985 mm -Transport dimensions: 3860/2635/H975 mm / 3625/3070/H975 mm -Weight: 6680 kg / 3700 kg

Miscellaneous EUROBOX by Georg Utz, model RAKO Dimensions: 400x600cm and 280mm high. Blue with 4 finger holes.

Miscellaneous EUROBOX by Georg Utz, model RAKO Dimensions: 400x600cm and 170mm high. Blue with 4 finger holes.

Tipping container, chip hopper, tipping body, mobile PAGUS Content: approx. 0.4 m3 internal dimensions: Length ( top / middle / bottom ): 880 / 1200 / 580 mm width: 625 mm depth: 710 mm fill edge height ( above road ): 730 mm fill edge height ( above container bottom ): 350 mm Material: steel, painted 2x fixed castor, 2x swivel castor forklift compatible, fork spacing: 450 mm ( center / center ) used, tested ! Dimensions: 1320 x 680 x 1100 mm

Tipping container, chip container, tipping body, mobile PAGUS Capacity: 0.19 m3 Payload: 350 kg internal dimensions: Length ( top / bottom ): 930 / 430 mm Width: 530 mm Depth: 480 mm Fill edge height: 790 mm ( above roadway ) Material: steel, painted 2x fixed castor, 1x swivel castor forklift compatible, fork spacing: 470 mm ( middle / middle ) tipper body falling back by itself used, tested ! Dimensions: 1120 x 680 x 800 mm

1 piece of used heating container (in need of repair / defective) Built in 1992 Manufacturer: Weho Heating medium: Fuel oil Defects: 1. Steam boiler leaking 2. Heating coil hot water leaking. 3. Ignition transformer defective. Location: Chemnitz Available: IMMEDIATELY Price on request Offers and prices are net ex location Subject to prior sale, Errors and/or misrepresentations excepted, without guarantee and/or warranty, Sale takes place in the ACTUAL state

Various galvanized storage containers with and without lid Dimensions H= 1.35 m, Br=1.75 m, L=2.00 m Net price 300,00 E

ZKT, 200 HL

here I have 5 cooling containers for 6 trays 60x40 Dimensions: 0.75 x 0.82 x 0.56 ( LxHxW ) with integrated battery removable per container 100,00€ Price per container

CO00855 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

CO00852 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

Forklift tipping container, tipping container, tipping trough, forklift trough, waste tipping container, scrap tipping container -Condition: New -Content: 0.8 m3 -Steel sheet: 3 mm -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Anti-corrosion: Powder coated -Dimensions: 1750/750/H870 mm -Number: several available -Price per piece -Own weight: 180 kg

CO01101 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

Industrial vacuum cleaner, vacuum cleaner, dust extractor, industrial vacuum cleaner, floor vacuum cleaner, safety industrial vacuum cleaner, industrial vacuum cleaner dust container -Manufacturer: Debus, dust container B1 for industrial vacuum cleaners -Type: B1 type 1 -Dust explosion classes: St 1 and St 2 in Zone 11 -Dust container: volume approx. 60 liters -Total dimensions: Ø 470 x 920 mm -Weight: 25 kg

CO01093 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

Storage Container | 10 feet | 3 meters Auction at: abcs://abc.troostwijkauctions.com/de/l/lagercontainer-%7C-20-fu%C3%9F- %7C-6-meter-%7C-co01141-A1-18421-104 If you have any questions, please do not hesitate to contact us!

Double jacketed, isolated, process tank, previously used in a dairy factory as cream tank. Pressure in the jacket 3,5 bar. Pressure in the tank: ATM. Central placed propellor agitator with 2x big blades (diameter 1.280 - 1.600 mm) for gentle treatment of the product (cream). Motor agitator: 2,6/4,4 kW. Aearator on top of the tank (ATM). Manhole on top of the tank. Porthole with light on top. CIP bowls for cleaning inside the tank. Temperature probe and level ruler with interior float. 3 Stainless steel legs. Outlet in the bottom, 450 mm height, with outlet valve (76 mm connection). Cylindrical height: 3.100 mm. Total dimensions: Ø 3.100 x 5.800 mm. Tank already dismantled out of the factory and located in an outside warehouse in France., Type of Machine: Process tank, Volume: 20.000 liter, Double jacketed: Yes, Insulation: Bottom, Type of agitator: Central placed propellor agitator with ...

Double jacketed, aseptic tank, previously used in a dairy factory for the storage of sterilized UHT milk. Pressure in the jacket: ATM. Pressure in the tank: -1 / 3.5 Bar. Allowable temperature in the jacket: 20 / 150 °C. Allowable temperature in the tank: 20 / 150 °C. Total capacity of the jacket: 3.015 liter. Total capacity of the tank: 40.224 liter. Surface of the jacket: 33 m2. Group Fluide: 2. Category: III. 3 stainless steel legs. No agitator. Manhole on top of the tank. CIP bowls for cleaning inside the tank. Outlet in the bottom, 730 mm height, with outlet of 76 mm. Stairs on the outside. Cylindrical height: 3.000 mm. Inside diameter: 3.500 mm. Total dimensions: Ø 3.684 x 6.081 mm. Weight: ± 7.000 kg. Construction drawing available. CE labelled., Sterile tank available because complete factory is closed., Sterile tank already dismantled and located outside on cradles., Type of ...

Storage Container | 20 feet | 6 meters Buy now at a low price at: abcs://abc.troostwijkauctions.com/de/l/lagercontainer-%7C-20-fu%C3%9F- %7C-6-meter-%7C-co00957-A1-18991-20

Sanitary container, 20 feet (6m x 2.44m) Buy now at a low price at: abcs://abc.troostwijkauctions.com/de/l/sanitarcontainer-%7C-20-fu%C3%9 F-%7C-6-meter-%7C-wc-%2B-dusche-%7C-co00399-A1-18991-15

Several containers / silos are sold against bidding.

Tipping containers, chip containers, tipping bodies, mobile BAUER GmbH Type: SGU-R 30 ( SGU-R30 ) Content: approx. 0.3 m3 Load capacity: 750 kg Internal dimensions: Length ( top / middle / bottom ): 940 / 1200 / 1000 mm Width: 600 mm Depth: 400 mm Fill edge height ( over roadway ): 600 mm fill edge height ( above container bottom ): 220 mm Material: steel, painted 2x fixed castor, 2x swivel castor, 1x brake forklift compatible, fork spacing: 220 mm ( center / center ) used, checked! Dimensions: 1430 x 680 x 800 mm

Tipping containers, chip containers, tipping bodies, mobile BAUER GmbH Type: SGU-R 30 ( SGU-R30 ) Content: approx. 0.3 m3 Load capacity: 750 kg Internal dimensions: Length ( top / middle / bottom ): 940 / 1200 / 1000 mm Width: 600 mm Depth: 400 mm Fill edge height ( over roadway ): 600 mm fill edge height ( above container bottom ): 220 mm Material: steel, painted 2x fixed castor, 2x swivel castor, 1x brake forklift compatible, fork spacing: 220 mm ( center / center ) used, checked! Dimensions: 1430 x 680 x 800 mm

CO01078 Auction until 20.02.2024: abcs://abc.troostwijkauctions.com/de/l/burocontainer-%7C-20-fu%C3%9F-% 7C-6-meter-%7C-co01078-A1-18991-30 We rent and sell storage containers, sea containers, construction containers, overseas containers, office container double systems. Offer with transport possible - Ask us. Sample pictures - viewing possible by arrangement. Please also take a look at our other offers.

Manufacturer: Containerbau Hameln / Weser-Container Dimensions: 5500 x 2300 x 750 mm Quantity available: 5 pcs. Year of manufacture: 3 x 2005; 1 x 2014; 1 x 2015 Load capacity: 15000 kg Weight: 2234-2240 kg Back: 5 mm steel Sides: 3 mm steel Hook mounting: according to DIN 30722 External rollers: with gunmetal bushing and shaft lubrication Tailgate: watertight with rubber seal Roof: hydraulic, with hand pump, tilting cylinder and stop on the driver's side Condition: good (the containers were rarely used) Location: Nienburg/Weser

Waste container galvanized, brand Schäfer with castors and plastic lid, BJ. 1992, 2..500 l capacity, perm. Total weight 1.5 tons, good condition for sale

Container from 2004, 20 fd standard storage or sea containers from 2004, complete (closed model), left door is welded, signs of wear. 1 available. 40 fd, 6,058 x 2,438 x 2,591 [m] Manufacturer:– Type: Standard container 20 fd Content [m3]: 33,1 Year of construction: 2004 Weight [kg]: 2.250 Dimensions LxWxH [cm]: 6,058 x 2,438 x 2,591

Stack and turn container, 10 pcs PAGUS 460 x 290 x 145 mm external dimensions ( length x width x height ): 460 x 290 x 145 mm base: 395 x 250 mm made of plastic used, checked! Dimensions (packaging): 460 x 290 x 530 mm

Filling line for containers from 1000ml to 5000ml, made up of: - ESQUERDA semi-automatic filler model LL-H/2/5000/BS with two dosing nozzles. Base built and completely enclosed in AISI 304 stainless steel. Volumetric dosing filling system using two 5000cc cylinders with independent hydraulic operation in each cylinder. It incorporates a mother tank for product feeding with an electric buoy. Productions: 1L: 1000 units/h 5L: 450 units/h Documentation available - ESQUERDA cap closer / threader model CL-A (1992) Chuck with magnetic clutch for torque adjustment. Documentation available - ENERCON Induction Cap Sealer COMPAK Type ML0049 Documentation available - GERMARK model 195 single head linear labeller For labels of max. height 195mm Standard speed: 25m/min Max speed: 50m/min Documentation available - Accumulation plate, made of stainless steel, motorized Ø1200mm

Storage container, 64 pieces PAGUS TGL 9392 - size III 380 x 285 x 200 mm made of sheet steel, partly galvanized. various colours illustration similar ! used, tested ! Dimensions ( with Euro pallet ): 1200 x 800 x 1700 mm

Offer 22550 Specifications: - Galvanized design with attached crane eyes made of flat iron - Usable inner area approx. 4 m² - Floor load per m² approx. 500 kg - Built-in shelving with three shelves - Inner width 2000 mm - Interior depth 2000 mm - Internal height 2000 mm - Door opening W 1300 x W 1890 mm - Space requirement approx. W 2100 x D 2150 x H 2250 mm - Height with crane eyelets approx. H 2450 mm - Weight approx. 300 kg

The box washer is designed for the semi-automatic washing of kistens and wooden containers, as standard. The use of a washer in the process reduces the consumption of water, detergents and energy. One box is washed at a time,

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

Isolated, process tank, previously used as in a dairy factory. Volume 47.000 liter. Pressure in the tank: ATM. Aearator on top of the tank. Manhole at the side of the tank (manhole cover excluded). CIP bowls (3x) for cleaning inside the tank. Agitator connection flange at the side on the bottom but without agitator itself. 6 Stainless steel legs. Outlet in the bottom, 400 mm height. Cylindrical height: 4.070 mm. Total dimensions: Ø 3.900 x 5.700 mm., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 2x tanks, stocknumber: #917 / #918., Type of Machine: Process tank, Volume: 47.000 liter, Double jacketed: No, Insulation: Yes, Material: SS 304, Type of agitator: No agitator itself, connection available, CIP Spray bowls: Yes, 3x, Manhole: Yes, but manhole cover excluded, Number of feet: 6x, Internal height: 4. ...

- A test apparatus brand Risatti matr . 9389828 - 30 metal containers.

Sanitary container, 20 feet (6m x 2.44m)

Storage Container | 20 feet | 6 meters

Robust, high-quality welding rotator with a load capacity of 10 tons. Diameter range: 100-4000 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

Robust, high-quality welding rotator with a load capacity of 5 tons. Diameter range: 100-3500 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

Man 12 Cylinder container for sale. Price: Please Apply

Containers, transport containers, sea containers, steel containers, ISO containers -Container: Steel container with underframe, can be driven under -Container interior dimensions: 6930/2450/H2350 mm -Gross weight: 6000 kg -Transport dimensions: 7200/2500/H2570 mm -Transport weight: 2880 kg

• Permissible load 1,500 kg • Mixing blades in container lid • Chopper unit, removable • Ceiling bearing • Light curtain • Approach station for containers • PLC Siemens S7-300 CPU 313C • Danfoss servo inverter • HMI Siemens Touch Panel • Project management • Printer • 4 Bohle MCG 1600 mixing containers (photo shows MCG 1200, not supplied) • Jungheinrich EJC 210 container pallet truck, rated load capacity 1,000 kg • Container floor scale Bizerba with printer, weighing range 10.0 -1,500.0 kg • Drive 400/24V/50Hz/8.75KW • Possibly with qualification documentation • Only 712 operating hours! • The mixer is ready for operation in a pharmaceutical company in northern Germany and can be inspected there by arrangement. Available from week 32/2024

1 piece of galvanized bulk container with stand (open top). Metrics: Inner diameter: 3m Length without funnel, without feet: 3.20m Hopper length: approx. 1m Funnel can be disassembled.

Bulk material silo, storage container with approx. 18m³ incl. feet Metrics: Diameter: 3m Length without hopper: 2.50m Length hopper: 1m Can be disassembled.

Bulk material silo, storage container with approx. 14m³ incl. feet Metrics: Diameter: 3m Length without funnel: 1.90m Length hopper: 1m Can be disassembled.

weight max.: 8 t foot operation: ja : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ja weight: 700 kg : Regale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

approx. 7.200 pieces, Euro stacking container in 1.19m x 610 x 420m - used - : Price per piece ex site: only 15.-€ (net)! Price for complete acceptance: only 10.-€ (net)! 1 truckload = 432 pieces! Manufacturer: unknown Year of manufacture: unknown External dimensions (LxWxH): 1,190 x 610 x 420mm Internal dimensions (LxWxH): 1,150 x 555 x 390mm Material: Polypropylene Weight per container: 10.8kg Colour: grey Approx. 432 boxes fit per truck Condition: good Available: from April 2024 Location: Emden, later Frankenberg camp