127,315 used machines on RESALE, but how to find them? Machine Search
pressure: 100 t table length: 1250 mm table width: 900 mm table travel: 1200 mm dayligth: 700 mm upper clamping surface:: 1000x1200 total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...
Vertical Machining Center HWACHEON Vesta-1000 10K Control: Heidenhain iTNC 620 Year of Make: 2014 Original pictures will follow. Travel: X-axis:1,000 mm Y-axis: 550 mm Z-axis: 500 mm Table size: 1,100 x 502 mm Table load: approx. 700 kg Recording: BT 40 Tool magazine: 30 compartment Spindle speed: 12,000 rpm Drive power:18.5 kW Equipment -Conveyor - Electronic handwheel - 4th axis
Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !
SPECIFICATIONS: Shaft: Ø 40 mm Table size: 1100 x 900 mm 1 4-roller drive Installed power: 6 HP
Technical data of the pallet rack stand: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Height: 4,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,000 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...
1-needle double lockstitch quick sewer
Hacker Zerbrik Motor 30KW Wavelength 1m Hydraulic Moving Floor Weight 3t Year of construction 2009 Dimensions: 1900x2600x1800 mm (LxWxH) Very suitable for pallets due to the long shaft, nails are no problem for the machine. For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.
sheet width: 1020 mm plate thickness: 2,5 mm bending angle max.: 135 ° stroke of upper beam: 25 mm weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,85 x 1,20 m PRICE: 2.045,-- EUR - with an oblique segmented upper cheek - distribution segment: 25-30-35-40-45-50-75-100-150-200-270 - done with the foot brake application The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...
Inserting and Foiling Machine, 2 Feeders, IJC Injjet-Controller and Video Jet Printer, Packaging Possibilities: >Lenght Min./Max. in mm: 150/420, Width: Min./Max. in mm: 100/305, Height Min./Max. in mm: 1-20 (upto 35mm When Working At Long Distances) Capacity: 15000 Products/Hour Type: PE-PVC-PPO, Thickness Min./Max. in μ: 18/50, Width: Min./Max. in mm: 200/700, Max. Roll Diameter in mm: 450, Min. Roll Diameter in mm: 76.2 <
max. format 75 x 105 cm Year of construction 2006 Automatic punching machine Computer control with touch screen max. 7,500 sheets/h (idle) Corrugated cardboard up to approx. 4 mm 2 side marks for drag or slide function 2 locking frames 2 Set of Clamping Frames for Stripping Tools Non-stop set-up and display Reading totalizer: approx. 28 million printing Operating hours 21,400 Delivery date: immediately Price on request. We supply and install worldwide.
FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...
min-max hoogte: 10 gt; 450 mm min-max breedte: 60 gt; 1050 mm cap: 400 kg/m maximaal positioneringsgewicht: 9 ton Vacon 110 CNC-besturing Voortman VB1250 lintzaag gt; cap: 500 x 1250 mm gt; versteksnede +/- 60°: 500 x 1000 mm gt; versteksnede +/- 45°: 500 x 850 mm gt; versteksnede -30°: 500 x 500 mm gt; zaagsnelheid: 40 gt; 120 m/min gt; vermogen: 7,5 kW gt; Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman 630 boorunit gt; boordiameter: 8/40 mm gt; draadtappen: M8/M24 gt; profielhoogtemeting inbegrepen gt; middelpuntmarkering inbegrepen gt; boorsnelheid: 0 gt; 2000 tpm gt; automatische gereedschapswisselaar: VTC 5/40 - 1x 5 posities gt; spindel: SK40 Hydraulisch aggregaat gt; 4kW - 160 bar
Control for Miwe Ideal 1000/5/2Kr. Parts dismantled immediately after shutting down. easy to clean no guarantee and warranty
Paper pile elevator L-1000-3W Operationg controlpanel sensor controlled height adjustment Tray Size 4B - 70x100 cm Lifting capacity 1000 kg
Transnorm spiral helix belt curve conveyor left 90°-825-600 IR600 RA2401 Technical data: Type designation: belt curve conveyor TS 1600-105 Helix frame width (NB): 825 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 260 mm rising) Incline: 260 mm / 90° = 1040 mm / 360° Support feet: optionally available Conveying speed (v m/s): 0.4 Drive: SEW gearmotor Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT106 (wear see pictures) year of construction: 2006 Optionally available: Supports Side guide one and both sides frequenzy converter for steples speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) scope of delivery: including Movimot frequency converter, without supports and side guides Driven: YES N ...
DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...
Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.
material width:150 mm material thickness:2,5 mm feed length:100 mm compressed air:6 bar clamping force of fastening pincer:2000 N clamping force of moving pincer:2000 N feeding force:1200 N weight:0,1 t Dimensions (WxDxH):0,35 x 0,85 x 0,5 m
material width:70 mm material thickness:0 - 1,5 mm feed length:100 mm material cross-cut:60 mm² feeding force:400 N clamping force of feeding pincer:1300 N air pressure - required:3 - 6 bar Weight:0,01 t Dimensions (WxDxH):0,4 x 0,4 x 0,7 m
Year of manufacture: 1992 / G: 2025 Spindle diameter ... 100mm Axis X ... 1500mm Axis Y ... 1250mm Spindle speed ... 7-1120 rpm Axis W Axis Z ... 1800mm ISO 50 Turntable diameter ... 1200x1200mm The machine is in good condition, possible to test under power.
Standing GRP tanks, polyester tanks from the company Staffelstein, with flat bottom with slope Volume: 100,000 L Dimensions: Ø 3.40 × 11.03 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|13 Agraffe: 5 HK Clear width: 2,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Standing GRP tanks, polyester tanks from the company Staffelstein, with flat bottom with slope Volume: 100,000 L Dimensions: Ø 3.40 × 11.03 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
2021 Kraft VPS-100/2500 Cardboard cutting machine VPS100 from Kraft The machine was built in 2021 and was used very little. VPS100/2500 Basic machine plus - 10 x tool for longitudinal machining - 1 x tool for cross processing - 2 x rubberized rollers as counter-cut or transport medium - 1 x upper pressure controlled in segments above the feed roller - 1 x control cabinet decoupled and integrated in the basic machine Additional: - Freestanding control panel - Automatic outfeed device - Automatic carton changer with 6 chutes (4 with side-by-side function) - Mguard router - Wireless 1D code scanner incl. interface - 3 free Kraft Boxdesigner licenses + 1 license on the machine Description With the VPS100 automatic box cutting machine you can finally produce the right packaging, at the right time, in the right quantity. Reduce your cardboard consumption to what is necessary ...
Standing GRP tanks, polyester tanks from the company Staffelstein, with flat bottom with slope Volume: 100,000 L Dimensions: Ø 3.40 × 11.03 m high Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485
Equipments: 4 head paper drills with three-phase motor 380 V Infinitely variable drill speed and infinitely variable table stroke speed Quick clamping of the paper drills
- AISI 304 stainless steel - Galvanised steel frame Equipment - Taster - Partial drain ball valve - Total drain - Dome DN 400 Dimensions: - Length: 1250 mm - Width: 830 mm - Height: 1670 mm
Key data: 3500 kN
Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fa ...
Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.
Demag 5 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 5 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger
Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg
centre height: 102 mm centre distance: 450 mm spindle bore: 25 mm spindle speed:: 220 - 2600 weight of the machine ca.: t dimensions of the machine ca.: m Accessories were not checked for completeness Cabinets are not included in the scope of delivery The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Demag 6,3 ton x 15 100 mm Kind of: overhead travelling crane Capacity: 6,3 ton Span: 15 100 mm Radiocontrol: no radio control Numbre of riggers : double rigger
External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T
Labeling Machine Manufacturer: SES Type SES-107 TTF Year of manufacture 2003 2-sided carton labeller including thermal transfer printer (1x top, 1x side) 2x SES 107TTF installed on the left side max. label width 116 mm Min. label width Label width 25 mm Min. label height Label height 15 mm Print width 106.6 mm, max. print height 1,500 mm Printing speed 300 mm/sec, labeling speed 0-18 m/min Conveyor belt length 1500 mm x 280 mm width Housing, control Siemens PLC S 7
Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters
TECHNICAL SPECIFICATIONS Manufacturer: IBAG Designation: Double Toggle Jaw Crusher Type: KS 1250/1000/04 Year of Make: 1997 Inlet opening (width x height): 1,250 x 1,000 mm Net weight: approx. 60 t. Drive power: 160 kW Grease lubrication pump: yes SPECIFIC COMMENT - Incl. inlet box - Incl. complete set of crushing jaws - Incl. printing plates and spare parts - Eccentric swingarm torn, spare swingarm available - Ideal for crushing hard rock
Overview The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs 4500 rpm with self cleaning drum Accessories Spare Parts Tools
This Pinacho STH 400-105Ã3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105Ã3000 horizontal turning machine. Contact us for more information.
WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton
x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: 840 D Siemens Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A63 NC-Swivle milling head:: swivellable: B: -30 / +180 ° swivle time: 1,2 s pallet changer:: numbers of pallets: 2 size of pallet: 1.000 x 800 mm max. workpiece weight: 1.500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 180 pos. tool taper: HSK-A63 total power requirement: 78 kVA weight of the machine ca.: 27,0 t dimensions of the machine ca.: 8,0 x 7,0 x 3,4 m Documents: Chip conveyor: Coolantsystem: through spindle coolant: pallet changer: Automatic Tool Changer: full splash guard: Rotary screen: elektr. hand wheel: 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rota ...
This 3-axis TOS KUÅIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUÅIM FS 100 S/A3 vertical machining centre. Contact us for more information.
This 5-axis RÃDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm à 855 mm à 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÃDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details.
This 5-axis SCHÃCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÃCO AS 100 universal machining centre we have for sale. Contact us for further details.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss type: SLB 100|15 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,700 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
This WEMHÃNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÃNER Variopress Basic 1000S laminating press. Contact us for more information.
maximum number of results exceeded
please refine your search
