kva 10 used for sale

measuring stand, tripod, dial gauge holder, test stand, micrometer holder, dial gauge stand, magnetic measuring stand, dial gauge stand -Measuring stand: Dial gauge holder -Recording: see photos -Dimensions: Ø 105/H325 mm -Weight: 3,5 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright -Art.No.: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg

Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with tiltable middle rail and end stop -Total length: 2000 mm -Roll width: 1000 mm -Rollers: Ø 80 mm -Roll spacing: 100 mm -Transport dimensions: 2390/800/H1580 mm -Total weight: 140 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting, stroke 105 mm -Piston rod: Ø 110 mm -Dimensions: Ø 160 x 280 mm -Weight: 18.5 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 37 mm -Holes: Ø 25 mm / Distance: retracted 365 mm / 360 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 82 x 440 mm -Weight: 7.7 kg / 7.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 25 mm -Holes: Ø 25 mm / Distance: retracted 355 mm -Dimensions: Ø 77 x 420 mm -Weight: 6.9 kg

shock absorbers -Manufacturer:Sachs, shock absorber type T45x248 hA 2 pieces -Art.No.: 25 1 700 106 030 003 326 2500 -Hole: Ø 16 mm / distance 425 mm -Price/Delivery: complete -Dimensions: Ø 75 x 480 mm -Weight: 5.5 kg/piece

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm -Holes: Ø 10 mm / Distance: retracted 220 mm -Dimensions: Ø 35 x 248 mm -Weight: 1.3 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: MK5 mount -Hole size: Ø 105 mm -Passage: Ø 22 mm -Dimensions: Ø 105 x 225 mm -Weight: 4.5 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 6-groove pulley -Art.No.: 168-06-00041000 -V-belt width: 13 mm -Mounting: Ø 38 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 105 x 95 mm -Weight: 3.6 kg/piece

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

Knurled screw handwheel -Knurled screw: handwheel -Length: 100 to 163 mm -Thread: trapezoidal thread see photos -Dimensions: Ø 72 x 100 mm -Weight: 2.7 kg

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Steel holder, clamping plate with T-slot, wedge holder -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Fan: 230 V 19 W -Dimensions: 205/205/H110 mm -Weight: 0.9 kg

Micrometer screws, micrometer screws, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 320/180/H40 mm -Weight: 0.9 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Revolving center: Mounting: MK4 -Type: unfortunately without type designation -Centering tip: Ø 100 mm -Dimensions: Ø 100 x 230 mm -Weight: 5.2 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller -Load capacity: kg -Dimensions: 210/100/H65 mm -Weight: 5 kg -only 1 piece available

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

Vernier caliper, caliper, vernier caliper -Caliper: Vernier caliper with fine adjustment -Measuring range: 0-1000 mm -Measuring accuracy: 0.1 mm -Dimensions: 1180/225/H15 mm -Weight: 2.5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-1000 PPV-A -Stroke: 1000 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -max. pressure: 12 bar -Dimensions: 1190/80/H110 mm -Weight: 10.2 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type SPA Ø 102 mm -V-belt width: 13 mm -Mounting: Ø22 x 52 mm -Dimensions: Ø102 x 55 mm -Weight: 1.8 kg

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type 100A Ø 106 mm -V-belt width: 13 mm -Material: aluminum with steel insert, see photos -Mounting: Ø24 x 45 mm -Dimensions: Ø106 x 45 mm -Weight: 0.8 kg

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: Jung, machine spindle -Type: MP 10z -Speed: max rpm -Recording: Dimensions see photos -Dimensions total: 545/210/120 mm -Weight: 23.5 kg

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Caster, swivel caster, transport equipment caster, fixed caster, furniture caster -Swivel caster: with locking mechanism/brake -Wheel: Type Ø 100 x 32 mm -Thread: M12 -Quantity: 15x swivel casters available Price: per piece / Minimum order 4 pieces -Dimensions: 163/60/H150 mm -Weight: 0.6 kg/pc.

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 67 mm -Dimensions: see photo technical drawing -Dimensions: 101/97/H67 mm -Weight: 3.1 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 78 mm -Dimensions: see photo technical drawing -Dimensions: 123/100/H80 mm -Weight: 5.3 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: with guide carriage -Centre height: 100 mm -Dimensions: see drawing in the photos -Dimensions: 580/100/H180 mm -Weight: 11.1 kg

SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate -Number: 11x generator available -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm -Weight: 1069 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: on solid base frame -Clamping surface: 2015 x 1000 mm -Table height: 930 mm -Plate thickness: 30 mm -Transport dimensions: 2015/1000/H930 mm -Weight: 973 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Voltage: 24 V DC / 5.5 W -Number: 17 fans available Price: per piece -Dimensions: 205/205/H110 mm -Weight: 0.6 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-32-100 PPV-A 14045 -Stroke travel: 100 mm -Piston rod: Ø 12 mm / M10 -Pmax: 10 bar -Quantity: 1 piece -Dimensions: 245/65/H80 mm -Weight: 1 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Manufacturer: MS, Ultrasonic welding generator -Type: SoniGEN 35/1000 or similar, unfortunately no exact designation -Power output: kVA -Dimensions: 460/150/H150 mm -Weight: 5.5 kg

Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT